Alpine skis -- Binding mounting area -- Requirements for test screws

This document specifies the dimensions, mechanical properties and fastening characteristics of test
screws used for testing the binding mounting area of alpine skis.c

Skis alpins -- Zone de montage de la fixation -- Spécifications des vis d'essai

L'ISO 10045:2017 sp�cifie les dimensions, les propri�t�s m�caniques et les caract�ristiques de tenue des vis d'essai utilis�es pour soumettre � essai la zone de montage de la fixation des skis alpins.

Alpske smuči - Področje montaže varnostnih vezi - Zahteve za vijake za preskušanje

Ta dokument določa mere, mehanske lastnosti in lastnosti pritrjevanja testnih
vijakov za preskušanje področja montaže varnostnih vezi pri alpskih smučeh.

General Information

Status
Published
Public Enquiry End Date
29-Jul-2018
Publication Date
23-Aug-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Aug-2018
Due Date
19-Oct-2018
Completion Date
24-Aug-2018

Relations

Buy Standard

Standard
ISO 10045:2017 - Alpine skis -- Binding mounting area -- Requirements for test screws
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10045:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 10045:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 10045:2017 - Skis alpins -- Zone de montage de la fixation -- Spécifications des vis d'essai
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10045
Second edition
2017-11
Alpine skis — Binding mounting area
— Requirements for test screws
Skis alpins — Zone de montage de la fixation — Spécifications des
vis d'essai
Reference number
ISO 10045:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 10045:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10045:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
5 Requirements . 1
5.1 General . 1
5.2 Materials . 2
5.3 Dimensions . 2
5.3.1 Screw head . 2
5.3.2 Thread and end configuration . 2
5.4 Surface . 3
5.5 Strength requirements . 3
5.6 Typical application characteristics . 4
5.6.1 General. 4
5.6.2 Mounting characteristics . 4
5.6.3 Fastening characteristics . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 10045:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Direc
...

SLOVENSKI STANDARD
oSIST ISO 10045:2018
01-julij-2018
$OSVNHVPXþL3RGURþMHPRQWDåHYDUQRVWQLKYH]L=DKWHYH]DYLMDNH]D
SUHVNXãDQMH
Alpine skis -- Binding mounting area -- Requirements for test screws
Skis alpins -- Zone de montage de la fixation -- Spécifications des vis d'essai
Ta slovenski standard je istoveten z: ISO 10045:2017
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST ISO 10045:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

oSIST ISO 10045:2018

---------------------- Page: 2 ----------------------

oSIST ISO 10045:2018
INTERNATIONAL ISO
STANDARD 10045
Second edition
2017-11
Alpine skis — Binding mounting area
— Requirements for test screws
Skis alpins — Zone de montage de la fixation — Spécifications des
vis d'essai
Reference number
ISO 10045:2017(E)
©
ISO 2017

---------------------- Page: 3 ----------------------

oSIST ISO 10045:2018
ISO 10045:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------

oSIST ISO 10045:2018
ISO 10045:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
5 Requirements . 1
5.1 General . 1
5.2 Materials . 2
5.3 Dimensions . 2
5.3.1 Screw head . 2
5.3.2 Thread and end configuration . 2
5.4 Surface . 3
5.5 Strength requirements . 3
5.6 Typical application characteristics . 4
5.6.1 General. 4
5.6.2 Mounting characteristics . 4
5.6.3 Fastening characteristics . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------

oSIST ISO 10045:2018
ISO 10045:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardizat
...

SLOVENSKI STANDARD
SIST ISO 10045:2018
01-september-2018
1DGRPHãþD
SIST ISO 10045:1995
$OSVNHVPXþL3RGURþMHPRQWDåHYDUQRVWQLKYH]L=DKWHYH]DYLMDNH]D
SUHVNXãDQMH
Alpine skis -- Binding mounting area -- Requirements for test screws
Skis alpins -- Zone de montage de la fixation -- Spécifications des vis d'essai
Ta slovenski standard je istoveten z: ISO 10045:2017
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 10045:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 10045:2018

---------------------- Page: 2 ----------------------

SIST ISO 10045:2018
INTERNATIONAL ISO
STANDARD 10045
Second edition
2017-11
Alpine skis — Binding mounting area
— Requirements for test screws
Skis alpins — Zone de montage de la fixation — Spécifications des
vis d'essai
Reference number
ISO 10045:2017(E)
©
ISO 2017

---------------------- Page: 3 ----------------------

SIST ISO 10045:2018
ISO 10045:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 10045:2018
ISO 10045:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
5 Requirements . 1
5.1 General . 1
5.2 Materials . 2
5.3 Dimensions . 2
5.3.1 Screw head . 2
5.3.2 Thread and end configuration . 2
5.4 Surface . 3
5.5 Strength requirements . 3
5.6 Typical application characteristics . 4
5.6.1 General. 4
5.6.2 Mounting characteristics . 4
5.6.3 Fastening characteristics . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 10045:2018
ISO 10045:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
e
...

NORME ISO
INTERNATIONALE 10045
Deuxième édition
2017-11
Skis alpins — Zone de montage de la
fixation — Spécifications des vis d'essai
Alpine skis — Binding mounting area — Requirements for test screws
Numéro de référence
ISO 10045:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 10045:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en oeuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 10045:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Désignation . 1
5 Exigences . 2
5.1 Généralités . 2
5.2 Matériaux . 2
5.3 Dimensions . 2
5.3.1 Tête de vis . 2
5.3.2 Filet et extrémité de la vis . 2
5.4 Surface . 3
5.5 Exigences de résistance . 3
5.6 Caractéristiques dans les applications types . 4
5.6.1 Généralités . 4
5.6.2 Caractéristiques de montage . 4
5.6.3 Caractéristiques de fixation . 4
© ISO 2017 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 10045:2017(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document so
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.