iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50632-2-6:2015/A2:2021

(Amendment)

Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 applies to hammers.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-6: Besondere Anforderungen für Hämmer

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-6: Exigences particulières pour les marteaux

Elektromotorna orodja - Postopek meritve prahu - 2-6. del: Posebne zahteve za kladiva - Dopolnilo A2

General Information

Status
Published
Public Enquiry End Date
24-Sep-2020
Publication Date
20-Dec-2020
ICS
25.140.20 - Electric tools
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Dec-2020
Due Date
22-Feb-2021
Completion Date
21-Dec-2020
Ref Project
EN 50632-2-6:2015/A2:2020 - Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

Relations

Amends
SIST EN 50632-2-6:2015 - Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
Effective Date
27-Aug-2019

Buy Standard

EN 50632-2-6:2015/A2:2021EN 50632-2-6:2015/A2:2021
PreviousNext
Amendment
EN 50632-2-6:2015/A2:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 50632-2-6:2015/oprA2:2020EN 50632-2-6:2015/oprA2:2020
PreviousNext
Draft
EN 50632-2-6:2015/oprA2:2020
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50632-2-6:2015/A2:2021
01-februar-2021
Elektromotorna orodja - Postopek meritve prahu - 2-6. del: Posebne zahteve za
kladiva - Dopolnilo A2
Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular
requirements for hammers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-6: Besondere
Anforderungen für Hämmer
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-6:
Exigences particulières pour les marteaux
Ta slovenski standard je istoveten z: EN 50632-2-6:2015/A2:2020
ICS:
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-6:2015/A2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-6:2015/A2:2021

---------------------- Page: 2 ----------------------
SIST EN 50632-2-6:2015/A2:2021


EUROPEAN STANDARD EN 50632-2-6:2015/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2020
ICS 25.140.20

English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-6: Particular requirements for hammers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-6: Exigences particulières pour les Teil 2-6: Besondere Anforderungen für Hämmer
marteaux
This amendment A2 modifies the European Standard EN 50632-2-6:2015; it was approved by CENELEC on 2020-11-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republ
...

SLOVENSKI STANDARD
SIST EN 50632-2-6:2015/oprA2:2020
01-september-2020
Elektromotorna orodja - Postopek meritve prahu - 2-6. del: Posebne zahteve za
kladiva - Dopolnilo A2
Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular
requirements for hammers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-6: Besondere
Anforderungen für Hämmer
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-6:
Exigences particulières pour les marteaux
Ta slovenski standard je istoveten z: EN 50632-2-6:2015/prA2
ICS:
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-6:2015/oprA2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-6:2015/oprA2:2020

---------------------- Page: 2 ----------------------
SIST EN 50632-2-6:2015/oprA2:2020

EUROPEAN STANDARD DRAFT
EN 50632-2-6:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
July 2020
ICS 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-6: Particular requirements for hammers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-6: Exigences particulières pour les Teil 2-6: Besondere Anforderungen für Hämmer
marteaux
This draft amendment prA2, if approved, will modify the European Standard EN 50632-2-6:2015; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2020-09-25.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62841-4-3:2021(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers (IEC 62841-4-3:2020)
EN IEC 62841-4-3:2021

This clause of Part 1 is applicable, except as follows:
Addition:
This document applies to the design of pedestrian controlled walk-behind
– cylinder lawnmowers;
and
– rotary lawnmowers equipped with
– metallic cutting means; and/or
– rigid non-metallic cutting means; and/or
– non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to
achieve cutting, and have a kinetic energy for each single cutting element of greater than 10 J.
NOTE 101 Machines that have non-metallic cutting means and a kinetic energy for each single cutting element
of less than or equal to 10 J are considered to be lawn trimmers.
This document does not apply to
– robotic lawnmowers;
– remote-controlled lawnmowers;
– flail mowers or flail-type attachments;
– scissors type lawnmowers;
– grassland mowers;
– sickle bar mowers;
– towed/semi-mounted grass-cutting machines;
– scrub-clearing machines;
– lawn trimmers and lawn edge trimmers;
– lawn edgers;
– grass trimmers;
– brush cutters;
– brush saws;
– agricultural mowers;
– trailing seat/sulky units;
– ride-on machines;
– non-powered lawnmowers;
– combustion engine powered lawnmowers;
– hybrid and fuel cell powered machines and associated charging systems; and
– garden tractors or their attachments.
NOTE 102 Robotic lawnmowers are covered by IEC 60335-2-107, and will be covered by a future part of IEC 62841.
NOTE 103 Lawn trimmers and lawn edge trimmers are covered by IEC 60335-2-91.
NOTE 104 Lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws will be covered by a future part of IEC 62841.
NOTE 105 Lawn edgers will be covered by a future part of IEC 62841.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-3:2021/A11:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
EN IEC 62841-4-3:2021/A11:2021

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2020-07-15: common mod, no xml

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-1:2014/A1:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
EN 62841-3-1:2014/A1:2021

No scope available

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-1:2014/A12:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
EN 62841-3-1:2014/A12:2021

2019-11-14: this prAA represents common mods. to EN 62841-3-1:2014/prA1 (PR=70783)
DOW= DOR+48 months

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-6:2020(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020)
EN IEC 62841-2-6:2020

This part of IEC 62841 applies to hand-held hammers.
Tools covered by this document include percussion hammers and rotary hammers,
including rotary hammers with the capability to rotate only with the percussion system
disengaged (drill only mode).
This document does not apply to drills and impact drills.
NOTE 101 Drills and impact drills are covered by IEC 62841-2-1.
This document does not apply to tools that are designed exclusively for driving fasteners,
such as palm nailers.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-6:2020/A11:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
EN IEC 62841-2-6:2020/A11:2020

2019-07-05: to be launched to the enquiry together with pr = 70011 (SV)
2019-07-05: Represents common mods. to EN 62841-2-6 (PR=70011)

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-3-9:2020/A11:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
EN IEC 62841-3-9:2020/A11:2020

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-3-9:2020(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020)
EN IEC 62841-3-9:2020

This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding device.
NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3.
This document does not apply to saws designed for use with abrasive wheels.
NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10.
This document does not apply to tools combining the function of a mitre saw with the function
of a table saw.
NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are
covered by a future part of IEC 62841-3.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-4:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)
EN 62841-3-4:2016/A1:2020

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-1:2020(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws (IEC 62841-4-1:2017)
EN 62841-4-1:2020

EN-IEC 62841-4-1 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to - chain saws for tree service as defined in ISO 11681-2; or - pole-mounted pruners. The chain saws covered by this standard are designed only to be operated with the right hand on the rear handle and the left hand on the front handle.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day