Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3: Location referencing for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO 14819-3:2021)

This document specifies location referencing rules to address the specific requirements of Traffic Message Channel (TMC) systems, which use abbreviated coding formats to provide traffic and travel information (TTI) messages over mobile bearers (e.g. GMS, DAB) or via exchange protocols like DATEX
II. In particular, the rules address the Radio Data System-Traffic Message Channel (RDS-TMC), a means
of providing digitally-coded TTI to travellers using a silent data channel on FM radio stations, based on the ALERT-C protocol.

Intelligente Transportsysteme - Verkehrs- und Reiseinformationen über Verkehrsmeldungskodierung - Teil 3: Ortsreferenzierung für Radiodatensysteme für den digitalen Radiokanal für Verkehrsmeldungen (RDS-TMC) unter Nutzung von ALERT-C (ISO 14819-3:2021)

Dieses Dokument legt Ortsreferenzierungsregeln fest, welche die spezifischen Anforderungen von Verkehrsmeldungskanal-Systemen (TMC-Systemen) adressieren, in denen abgekürzte Kodierungsformate zur Bereitstellung von Verkehrs- und Reiseinformations(TTI)-Meldungen über mobile Träger (z. B. GMS, DAB) oder über Austauschprotokolle wie DATEX II, zum Einsatz kommen. Die Regeln gelten insbesondere für den digitalen Radiokanal für Verkehrsmeldungen (RDS-TMC), den FM-Radiosender nutzen, um Reisenden digital kodierte TTI über einen stummen Datenkanal auf der Basis des ALERT C-Protokolls bereitzustellen.

Systèmes intelligents de transport - Informations sur le trafic et le tourisme via le codage de messages sur le trafic - Partie 3: Références de localisants pour le système de radiodiffusion de données (RDS) - Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C (ISO 14819-3:2021)

Le présent document spécifie les règles de référence de localisant pour couvrir les exigences spécifiques des systèmes TMC (Traffic Message Channel - Canal de messages d'informations sur le trafic), qui utilisent des formats de codage abrégés pour fournir des messages d'informations sur le trafic et les déplacements (TTI) en utilisant des supports mobiles (par exemple: GSM, DAB) ou des protocoles d’échange tels que DATEX II. Ces règles traitent notamment du système de radiodiffusion de données - Canal de messages d’informations sur le trafic (RDS-TMC) qui est un moyen de fournir des messages TTI codées numériquement à des usagers en utilisant un canal de données silencieux diffusé par des stations de radiodiffusion en FM, sur la base du protocole ALERT-C.

Inteligentni transportni sistemi - Sporočila prometnih in potovalnih informacij prek kodiranih prometnih sporočil - 3. del: Navajanje lokacije za radijski podatkovni sistem (RDS) - Prometni informacijski kanal (RDS-TMC), ki uporablja sistem ALERT-C (ISO 14819-3:2021)

General Information

Status
Published
Public Enquiry End Date
10-Nov-2019
Publication Date
15-Apr-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Mar-2021
Due Date
23-May-2021
Completion Date
16-Apr-2021

Relations

Buy Standard

Standard
EN ISO 14819-3:2021
English language
77 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 14819-3:2019 - BARVE
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14819-3:2021
01-maj-2021
Nadomešča:
SIST EN ISO 14819-3:2014
Inteligentni transportni sistemi - Sporočila prometnih in potovalnih informacij prek
kodiranih prometnih sporočil - 3. del: Navajanje lokacije za radijski podatkovni
sistem (RDS) - Prometni informacijski kanal (RDS-TMC), ki uporablja sistem
ALERT-C (ISO 14819-3:2021)
Intelligent transport systems - Traffic and travel information messages via traffic message
coding - Part 3: Location referencing for Radio Data System - Traffic Message Channel
(RDS-TMC) using ALERT-C (ISO 14819-3:2021)
Intelligente Transportsysteme - Verkehrs- und Reiseinformationen über
Verkehrsmeldungskodierung - Teil 3: Ortsreferenzierung für Radiodatensysteme für den
digitalen Radiokanal für Verkehrsmeldungen (RDS-TMC) unter Nutzung von ALERT-C
(ISO 14819-3:2021)
Systèmes intelligents de transport - Informations sur le trafic et le tourisme via le codage
de messages sur le trafic - Partie 3: Références de localisants pour le système de
radiodiffusion de données (RDS) - Canal de messages d'informations sur le trafic (RDS-
TMC) avec ALERT-C (ISO 14819-3:2021)
Ta slovenski standard je istoveten z: EN ISO 14819-3:2021
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 14819-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 14819-3:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 14819-3:2021


EN ISO 14819-3
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2021
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes EN ISO 14819-3:2013
English Version

Intelligent transport systems - Traffic and travel
information messages via traffic message coding - Part 3:
Location referencing for Radio Data System - Traffic
Message Channel (RDS-TMC) using ALERT-C (ISO 14819-
3:2021)
Systèmes de transport intelligents - Informations sur le Intelligente Verkehrssysteme - Verkehrs- und
trafic et les déplacements via le codage de messages Reiseinformationen über Verkehrsmeldungskodierung
sur le trafic - Partie 3 : Références de localisants pour - Teil 3: Ortsreferenzierung für Radiodatensysteme -
le système de radiodiffusion de données - canal de Verkehrsmeldungskanal (RDS-TMC) unter Nutzung
messages d'informations sur le trafic (RDS-TMC) avec von ALERT-C (ISO 14819-3:2021)
Alert-C (ISO 14819-3:2021)
This European Standard was approved by CEN on 30 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14819-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 14819-3:2021
EN ISO 14819-3:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 14819-3:2021
EN ISO 14819-3:2021 (E)
European foreword
This document (EN ISO 14819-3:2021) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2021, and conflicting national standards shall
be withdrawn at the latest by August 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14819-3:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 14819-3:2021 has been approved by CEN as EN ISO 14819-3:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 14819-3:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 14819-3:2021
INTERNATIONAL ISO
STANDARD 14819-3
Third edition
2021-02
Intelligent transport systems — Traffic
and travel information messages via
traffic message coding —
Part 3:
Location referencing for Radio Data
System-Traffic Message Channel (RDS-
TMC) using ALERT-C
Systèmes de transport intelligents — Informations sur le trafic et le
tourisme via le codage de messages sur le trafic —
Partie 3: Références de localisants pour le système de radiodiffusion
de données (RDS) — Canal de messages d'informations sur le trafic
(RDS-TMC) avec ALERT-C
Reference number
ISO 14819-3:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
4 Location coding . 2
4.1 General . 2
4.2 Location tables . 2
4.2.1 General. 2
4.2.2 Versions and versioning of location tables . 3
4.2.3 Exchanging location tables . 3
4.2.4 Hierarchical structure . 3
4.2.5 Location types . 4
4.2.6 Offsets . 5
4.2.7 Direction of the road . 5
4.2.8 Country codes and location table numbers . 5
4.2.9 Constraints . 6
4.3 TMC location categories, types and subtypes . 6
4.4 Location table content . 6
4.4.1 General. 6
4.4.2 Nominal record content . 6
4.4.3 Road descriptions .11
4.4.4 Names .12
4.4.5 Upward references .12
4.4.6 Offsets .12
4.4.7 Urban .12
4.4.8 Intersection reference .12
4.4.9 WGS84 co-ordinates .13
4.4.10 InterruptsRoad .13
4.5 Detailed junction referencing .14
4.5.1 Conventional junctions .14
4.5.2 Complex junctions .14
4.5.3 Detailed coding of link roads .14
4.6 Detailed situation locations .14
4.6.1 Introduction .14
4.6.2 Normal location referencing .14
4.6.3 Detailed location referencing .15
4.6.4 Precise location referencing .15
4.7 One- and two-way locations .15
4.7.1 Basic principles .15
4.7.2 Junctions .15
4.7.3 Locations with only an exit or entry and locations occurring on one side only.15
4.7.4 DiversionPos/DiversionNeg .17
Annex A (normative) TMC location categories, types and subtypes .18
Annex B (informative) Location table identification .26
Annex C (normative) Detailed methods for the usage of location tables .32
Annex D (informative) Background information .67
Bibliography .69
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
TC 278, Intelligent transport systems, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 14819-3:2013), which has been
technically revised.
The main changes compared to the previous edition are as follows:
The following TISA specifications were integrated:
— Location Table Exchange Format 24.
— Reuse-of-location-codes.
— Roads-and-Junction-number-translation.
— Coding of isolated areas.
— Language identifiers.
— Backward compatibility.
— Coding of name translations and languages in TMC tables.
— DLR methods for locations in TMC Location.
A list of all parts in the ISO 14819 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

Introduction
This document primarily addresses the needs of RDS-TMC ALERT-C messages which are in widespread
worldwide use. The modular approach used here is intended to facilitate future extension of the location
referencing rules to other traffic and travel messaging systems.
This document sets out ways of specifying places and positions in traffic and travel information
messages, including RDS-TMC messages (the Radio Data System-Traffic Message Channel).
It defines the structure and semantics of location tables for Traffic Information Centres (TICs) and
receivers.
a) Traffic and travel messages:
1) Traffic and travel information is created and updated in an originating database, by human
operators or automated systems. Information is transferred to one or more remote systems by
means of messages.
2) In this context, a message is a collection of data which is exchanged to convey information for an
agreed purpose between two or more parties. Traffic and travel messages are digitally-coded
sets of data exchanged by interested parties, which convey information about traffic, travel
and/or transport networks. Digital coding may be alphanumeric, as in EDIFACT, or binary, as in
RDS-TMC.
3) The traffic and travel messages developed in programmes of the European Union are open,
non-proprietary proposals for standards intended to serve the public interest by facilitating
interconnection and interoperability of the relevant information systems.
b) Location referencing.
Location references provide the means of saying where in traffic and travel messages.
The location referencing component of a traffic and travel message enables a service provider to indicate
the physical location of the event being described. The management of TMC location databases requires
on-going maintenance. It is necessary to both manage location database ID allocation for countries
implementing TMC services and to validate new and updated location databases when ground features
change. These activities are led by service providers who also need to ensure that their end-users
are kept up-to-date. The Traveller Information Services Association (www .tisa .org) manages the ID
allocation on a worldwide basis. TISA provides location database validation for service providers who
generally arrange location database updates on a bi-annual cycle. This certification procedure extends
the basic rules mentioned in this standard and also applies a best-practice validation. TISA grants a
stamp of quality to those location tables that pass a set of tests.
© ISO 2021 – All rights reserved v

---------------------- Page: 11 ----------------------
SIST EN ISO 14819-3:2021

---------------------- Page: 12 ----------------------
SIST EN ISO 14819-3:2021
INTERNATIONAL STANDARD ISO 14819-3:2021(E)
Intelligent transport systems — Traffic and travel
information messages via traffic message coding —
Part 3:
Location referencing for Radio Data System-Traffic
Message Channel (RDS-TMC) using ALERT-C
1 Scope
This document specifies location referencing rules to address the specific requirements of Traffic
Message Channel (TMC) systems, which use abbreviated coding formats to provide traffic and travel
information (TTI) messages over mobile bearers (e.g. GMS, DAB) or via exchange protocols like DATEX
II. In particular, the rules address the Radio Data System-Traffic Message Channel (RDS-TMC), a means
of providing digitally-coded TTI to travellers using a silent data channel on FM radio stations, based on
the ALERT-C protocol.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 639-1, Codes for the representation of names of languages — Part 1: Alpha-2 code
ISO 14819-1, Intelligent transport systems — Traffic and travel information messages via traffic message
coding — Part 1: Coding protocol for Radio Data System-Traffic Message Channel (RDS-TMC) using ALERT-C
ISO 15924, Information and documentation — Codes for the representation of names of scripts
3 Terms, definitions and abbreviated terms
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
For the purposes of this document, the following abbreviated terms apply:
ALERT-C Advice and Problem Location for European Road Traffic, Version C
ASCII American Standard Code for Information Interchange
CCD country code
CID country identifier
CLST code of location subtype
CNAME country name
ECC extended country code
EDIFACT Electronic data interchange for administration commerce and transport
© ISO 2021 – All rights reserved 1

---------------------- Page: 13 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

GDF geographic data files (for modelling and exchange of geographic data for transport
telematics applications)
LC location code
LTCC location table country code
LTN location table number
POI point of interest
RDS radio data system (digital information channel on FM sub carrier)
TIC traffic information centre
TISA Traveller Information Services Association
TMC traffic message channel
TTI traffic and travel information
WGS84 World Geodetic System 1984
4 Location coding
4.1 General
Location references used by RDS-TMC are covered by the location referencing rules defined in this
subclause. The ALERT-C coding protocol for RDS-TMC is defined in ISO 14819-1.
ALERT-C supports a digital, silent data broadcast service for motorists, providing information about
many kinds of traffic situations. This includes roadwork, weather and traffic incident information
relating to major national and international roads, regional roads and local or urban roads.
4.2 Location tables
4.2.1 General
Within RDS-TMC, locations are identified and referenced by their location code. A given RDS-TMC
service uses a pre-defined location table, containing the pre-stored details of the locations that can be
referenced in messages from that service.
A location code in such a message refers and serves as a tabular ‘address’ of the pre-stored location
details in the location table used by the service. A real-world location may have more than one location
code within the same location table. However, within a given location table, each location code refers to
one and only one location. A location code has a number in the range 1 to 63 487.
In ALERT-C, a further 2048 numbers shall be reserved for INTER-ROAD (see ISO 14819-1) and other
forms of referencing.
A table may contain a maximum number of 65 536 codes allocated in the following way:
Location code Use
0 reserved
1 - 63,487 free for normal location coding
63,488 - 64,511 for special purposes
64,512 - 65,532 for INTER-ROAD
64,533 - 65,535 special functions
NOTE INTER-ROAD is a coding mechanism within ALERT-C to reference in a specific type of ALERT-C
message (the INTER-ROAD message) a location belonging to a different location table. The INTER-ROAD location
can be a table in the same country as well as a table in another country.
2 © ISO 2021 – All rights reserved

---------------------- Page: 14 ----------------------
SIST EN ISO 14819-3:2021
ISO 14819-3:2021(E)

4.2.2 Versions and versioning of location tables
Once a location has been allocated, it cannot easily be re-allocated (in an RDS-TMC/ALERT-C
environment). Therefore, all existing locations and their associated location codes in a given location
table should be regarded as fixed. However, other attributes of a location may, within certain
constraints, sometimes change (e.g. name, positive offset, negative offset).
Within each location table, space (unallocated location codes) shall be left to accommodate future
requirements for additional locations (to deal with new construction and location referencing
requirements not originally foreseen).
Whenever new locations are added to, or removed from, a location table (for example to extend coverage
or to reflect changes to the road network), the resulting table shall be treated as a new version. The
creation and tracking of versions of a location table allows the evolution of a location table to be
understood and supports the successful use of the table and associated TMC service. A new version of
an existing location table shall remain compatible with the previous versions of the same location table
– the changes shall not be such that the location of a TMC message could be wrongly interpreted by a
receiver. For example, location codes which are deleted should not be re-used for a long period. Also,
changing the attributes class and type of a location might cause an incompatible version of the table. It
is part of TISA's location certification process to judge if a table is backwards compatible.
The method for identifying and labelling different versions of a location table is shown in C.3.1.
TISA has established an allocation of location tables to show which are in use or available for use in
each country. The responsible agency in a country may apply for additional location table numbers in
future, to support further applications or more detailed, regional location tables. New tables can also be
issued occasionally to allow for complete updates to existing tables. Such major changes will, however,
be very disruptive for users, as existing receivers will not recognize TMC messages relating to the new
location table unless the same location table is also installed in the receiver. Switches from one location
table to a different one (rather than a new version of the same table) should therefore be avoided as far
as possible, especially in established markets.
4.2.3 Exchanging location tables
For TMC services to work well, the different organizations involved need to be able to understand the
location table number, version and contents. To achieve this, a location table exchange format has been
defined.
This format will be used for the exchange of TMC location tables between the var
...

SLOVENSKI STANDARD
oSIST prEN ISO 14819-3:2019
01-november-2019
Inteligentni transportni sistemi - Sporočila prometnih in potovalnih informacij prek
kodiranih prometnih sporočil - 3. del: Navajanje lokacije za radijski podatkovni
sistem (RDS) - Prometni informacijski kanal (RDS-TMC), ki uporablja sistem
ALERT-C (ISO/DIS 14819-3:2019)
Intelligent transport systems - Traffic and travel information messages via traffic
message coding - Part 3: Location referencing for Radio Data System - Traffic Message
Channel (RDS-TMC) using ALERT-C (ISO/DIS 14819-3:2019)
Intelligente Transportsysteme - Verkehrs- und Reiseinformationen über
Verkehrsmeldungskodierung - Teil 3: Ortsreferenzierung für Radiodatensysteme für den
digitalen Radiokanal für Verkehrsmeldungen (RDS-TMC) unter Nutzung von ALERT-C
(ISO/DIS 14819-3:2019)
Systèmes intelligents de transport - Informations sur le trafic et le tourisme via le codage
de messages sur le trafic - Partie 3: Références de localisants pour le système de
radiodiffusion de données (RDS) - Canal de messages d'informations sur le trafic (RDS-
TMC) avec ALERT-C (ISO/DIS 14819-3:2019)
Ta slovenski standard je istoveten z: prEN ISO 14819-3
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
oSIST prEN ISO 14819-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14819-3:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 14819-3:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14819-3
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2019-08-23 2019-11-15
Intelligent transport systems — Traffic and travel
information messages via traffic message coding —
Part 3:
Location referencing for Radio Data System — Traffic
Message Channel (RDS-TMC) using ALERT-C
Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le codage de messages sur
le trafic —
Partie 3: Références de localisants pour le système de radiodiffusion de données (RDS) — Canal de
messages d'informations sur le trafic (RDS-TMC) avec ALERT-C
ICS: 35.240.60; 03.220.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14819-3:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
ISO 14819-3:2013(E)
oSIST prEN ISO 14819-3:2019
ISO/DIS 14819-3:2019(E)

Contents Page
Foreword . v
Introduction. vi
1 Scope. 1
2 Normative references. 1
3 Abbreviated terms . 2
4 Location coding. 3
4.1 General . 3
4.2 Location tables . 3
4.2.1 General . 3
4.2.2 Versions and versioning of location tables. 3
4.2.3 Exchanging location tables. 4
4.2.4 Hierarchical structure . 4
4.2.5 Location types . 5
4.2.6 Offsets . 6
4.2.7 Direction of the road . 6
4.2.8 Country codes and location table numbers . 6
4.2.9 Constraints. 7
4.3 TMC Location categories, types and subtypes. 7
4.4 Location table content . 7
4.4.1 General . 7
4.4.2 Nominal record content . 7
4.4.3 Road descriptions . 12
4.4.4 Names. 12
4.4.5 Upward references . 12
4.4.6 Offsets . 12
4.4.7 Urban . 12
4.4.8 Intersection reference. 13
4.4.9 WGS 84 co-ordinates . 13
4.4.10 InterruptsRoad. 13
4.5 Detailed junction referencing. 14
4.5.1 Conventional junctions . 14
4.5.2 Complex junctions . 14
4.5.3 Detailed coding of link roads . 14
4.6 Detailed situation locations. 15
4.6.1 Normal location referencing. 15
4.6.2 Detailed location referencing . 15
4.6.3 Precise location referencing . 15
4.7 One and two way-locations . 15
4.7.1 Basic principles . 15
4.7.2 Junctions. 15
4.7.3 Locations having only an exit or entry and locations occurring on one side only . 15
COPYRIGHT PROTECTED DOCUMENT 4.7.4 DiversPos / DiversionNeg. 17
Annex A (normative) TMC Location categories, types and subtypes. 18
© ISO 2019
A.1 General . 18
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
A.2 Area locations. 18
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
A.3 Linear locations . 20
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
A.4 Point locations. 22
below or ISO’s member body in the country of the requester.
ISO copyright office
Annex B (informative) Location Table Identification . 29
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
© ISO 2013 – All rights reserved iii
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 14819-3:2019
ISO/DIS 14819-3:2019(E)
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Abbreviated terms . 2
4 Location coding . 3
4.1 General . 3
4.2 Location tables . 3
4.2.1 General . 3
4.2.2 Versions and versioning of location tables . 3
4.2.3 Exchanging location tables . 4
4.2.4 Hierarchical structure . 4
4.2.5 Location types . 5
4.2.6 Offsets . 6
4.2.7 Direction of the road . 6
4.2.8 Country codes and location table numbers . 6
4.2.9 Constraints . 7
4.3 TMC Location categories, types and subtypes . 7
4.4 Location table content . 7
4.4.1 General . 7
4.4.2 Nominal record content . 7
4.4.3 Road descriptions . 12
4.4.4 Names . 12
4.4.5 Upward references . 12
4.4.6 Offsets . 12
4.4.7 Urban . 12
4.4.8 Intersection reference . 13
4.4.9 WGS 84 co-ordinates . 13
4.4.10 InterruptsRoad . 13
4.5 Detailed junction referencing . 14
4.5.1 Conventional junctions . 14
4.5.2 Complex junctions . 14
4.5.3 Detailed coding of link roads . 14
4.6 Detailed situation locations . 15
4.6.1 Normal location referencing . 15
4.6.2 Detailed location referencing . 15
4.6.3 Precise location referencing . 15
4.7 One and two way-locations . 15
4.7.1 Basic principles . 15
4.7.2 Junctions . 15
4.7.3 Locations having only an exit or entry and locations occurring on one side only . 15
4.7.4 DiversPos / DiversionNeg . 17
Annex A (normative) TMC Location categories, types and subtypes . 18
A.1 General . 18
A.2 Area locations . 18
A.3 Linear locations . 20
A.4 Point locations . 22
Annex B (informative) Location Table Identification . 29
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 14819-3:2019
ISO/DIS 14819-3:2019(E)
Annex C (normative) Detailed methods for the usage of location tables . 32
C.1 Methods for referencing affected road sections . 32
C.1.1 General . 32
C.1.2 Pre-defined primary location + extent . 32
C.1.3 Pre-defined primary and secondary locations . 33
C.1.4 Distance markers (primary location + extent). 33
C.1.5 Distance markers (primary + secondary location) . 34
C.1.6 Primary and secondary locations using pre-defined location, extent and distances . 34
C.1.7 Primary and secondary locations using pre-defined locations + distances . 35
C.1.8 Describing the extent of an event in ALERT-C . 35
C.1.9 Co-ordinates (primary + secondary locations) . 37
C.1.10 Proprietary referencing systems, e.g. GDF . 37
C.1.11 Text location naming . 37
C.1.12 Precise location referencing . 37
C.2 Methods for referencing specific features . 41
C.2.1 Parking facilities . 41
C.2.2 Other isolated POIs. 43
C.2.3 Parallel Roads . 44
C.3 Methods for identifying and exchanging location tables . 47
C.3.1 Identifying versions of a location table . 47
C.3.2 Exchanging location tables – the Location Table Exchange Format . 47
Annex D (informative) Background information . 72
D.1 Overall approach. 72
D.1.1 General . 72
D.1.2 Pre-defined locations . 72
D.1.3 GDF features . 73
Bibliography . 73
iv © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 14819-3:2019
ISO/DIS 14819-3:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT)
see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 204, Intelligent transport systems.
This third edition cancels and replaces all previous versions.
ISO 14819 consists of the following parts, under the general title Intelligent transport systems — Traffic and
travel information messages via traffic message coding:
 Part 1: Coding protocol for Radio Data System — Traffic Message Channel (RDS-TMC)
 Part 2: Event and information codes for Radio Data System — Traffic Message Channel (RDS-TMC)
 Part 3: Location referencing for Radio Data System — Traffic message Channel (RDS-TMC)
 Part 6 (to become deprecated): Encryption and conditional access for the Radio Data System — Traffic
Message Channel ALERT C coding
© ISO 2019 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 14819-3:2019
ISO/DIS 14819-3:2019(E)
Introduction
This document sets out ways of specifying places and positions in traffic and travel information messages,
including RDS-TMC messages (the Radio Data System - Traffic Message Channel).
It defines the structure and semantics of location tables for Traffic Information Centres (TICs) and receivers.
a) Traffic and travel messages;
1) Traffic and travel information is created and updated in an originating database, by human operators
or automated systems. Information is transferred to one or more remote systems by means of
messages.
2) In this context, a message is a collection of data which is exchanged to convey information for an
agreed purpose between two or more parties. Traffic and travel messages are digitally-coded sets of
data exchanged by interested parties, which convey information about traffic, travel and/or transport
networks. Digital coding can be alphanumeric, as in EDIFACT, or binary, as in RDS-TMC.
3) The traffic and travel messages developed in programmes of the European Union are open, non-
proprietary proposals for standards intended to serve the public interest by facilitating interconnection
and interoperability of the relevant information systems.
b) Location referencing.
Location references provide the means of saying where in traffic and travel messages
The location referencing component of a traffic and travel message enables a service provider to indicate the
physical location of the event being described. The management of TMC location databases requires on-
going maintenance. It is necessary to both manage location database ID allocation for countries implementing
TMC services and to validate new and updated location databases when ground features change. These
activities are led by service providers who also need to ensure that their end-users are kept up-to-date. The
Traveller Information Services Association (www.tisa.org) manages the ID allocation on a worldwide basis.
TISA provides location database validation for service providers who generally arrange location database
updates on a bi-annual cycle.
vi © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 14819-3:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14819-3:2019(E)
Intelligent transport systems — Traffic and travel information
messages via traffic message coding —
Part 3:
Location referencing for Radio Data System — Traffic Message
Channel (RDS-TMC) using ALERT-C
1 Scope
This standard primarily addresses the needs of RDS-TMC ALERT-C messages which arein widespread
worldwide use , however, the modular approach used here is intended to facilitate future extension of the
location referencing rules to other traffic and travel messaging systems.
The location referencing rules defined in this part of ISO 14819 address the specific requirements of Traffic
Message Channel (TMC) systems, which use abbreviated coding formats to provide TTI messages over
mobile bearers (e.g. GMS, DAB) or via exchange protocols like DATEX and DATEX II. In particular, the rules
address the Radio Data System - Traffic Message Channel (RDS-TMC), a means of providing digitally-coded
traffic and travel information to travellers using a silent data channel (RDS) on FM radio stations, based on the
ALERT-C protocol.
A certification process is set in place within TISA to validate in detail the submitted location tables. This
certification procedure extends the basic rules mentioned in this standard and also applies a best-practice
validation. TISA grants a stamp of quality to those location tables that pass a set of tests.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies
ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15:
Latin alphabet No. 9
ISO/IEC 10646:2012, Information technology — Universal Coded Character Set (UCS)
ISO 14819-1 Intelligent transport systems — Traffic and travel information messages via traffic
message coding — Part 1: Coding protocol for Radio Data Syst
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.