Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)

This document specifies a method, using dichloromethane, to determine the mass percentage of
triacetate or polylactide, after removal of non-fibrous matter, in textiles made of mixtures of
— triacetate or polylactide
with
— wool or other animal hair, silk, protein, cotton, viscose, cupro, modal,lyocell, polyamide, polyester,
acrylic, elastomultiester, polypropylene, elastolefin, melamine, polypropylene/polyamide
bicomponent,polyacrylate and glass fibres.
Triacetate fibres which have been partially hydrolysed (i.e. saponification) cease to be completely
soluble in the reagent. In such cases, this method is not applicable.

Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder Polylactidfasern mit bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-10:2019)

Dieses Dokument legt ein Dichlormethan Verfahren zur Bestimmung des prozentualen Massenanteils an Triacetat oder Polylactid, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus Fasermischungen aus
—   Triacetat  oder Polylactidfasern
mit
—   Wolle oder anderem Tierhaar, Seide, Proteinfasern, Baumwolle, Viskose, Cupro, Modal, Lyocell, Polyamid, Polyester, Polyacryl, Elastomultiester, Polypropylen, Elastolefin, Melamin, Polypropylen/Polyamid Bikomponenten, Polyacrylat und Glasfasern
fest.
Triacetatfasern, die partiell hydrolysiert wurden (d. h. Verseifung), sind in dem Reagenz nicht mehr vollständig löslich. In diesen Fällen ist dieses Verfahren nicht anwendbar.

Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de polylactide avec certaines autres fibres (méthode au dichlorométhane) (ISO 1833-10:2019)

Le présent document spécifie une méthode de détermination, au dichlorométhane, de la masse exprimée en pourcentage de triacétate ou de polylactide, après élimination des matières non fibreuses, dans les textiles composés de mélanges de :
— triacétate ou polylactide ;
avec
— laine ou autres poils animaux, soie, protéines, coton, viscose, cupro, modal, lyocell, polyamide, polyester, acrylique, élastomultiester, polypropylène, élastoléfine, mélamine, bicomposant polypropylène/polyamide, polyacrylate et fibres de verre.
Les fibres de triacétate qui ont été partiellement hydrolysées (c'est-à-dire par saponification) ne sont plus entièrement solubles dans le réactif. Dans ce cas, la présente méthode ne s'applique pas.

Tekstilije - Kvantitativna kemična analiza - 10. del: Mešanica triacetatnih ali polilaktidnih in nekaterih drugih vlaken (metoda z uporabo diklorometana) (ISO 1833-10:2019)

Ta dokument določa metodo z uporabo diklorometana za ugotavljanje masnega odstotka triacetata ali polilaktida po odstranitvi nevlakenske snovi v tekstilijah iz mešanic:
— triacetata ali polilaktida in
— volne ali drugih živalskih vlaken, svile, proteinskih vlaken, bombaža, viskoze, kupro vlaken, modalnih, liocelnih, poliamidnih, poliestrskih, akrilnih, elastomultiestrskih, polipropilenskih, elastolefinskih, melaminskih, dvokomponentnih polipropilenskih/poliamidnih, poliakrilatnih in steklenih vlaken.
Triacetatna vlakna, ki so bila delno hidrolizirana (tj. saponifikacija), niso več popolnoma topna v reagentu. V takih primerih se ta metoda ne uporablja.

General Information

Status
Published
Public Enquiry End Date
01-Nov-2018
Publication Date
06-Jun-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-May-2019
Due Date
03-Aug-2019
Completion Date
07-Jun-2019

RELATIONS

Buy Standard

Standard
SIST EN ISO 1833-10:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 1833-10:2019
01-julij-2019
Nadomešča:
SIST EN ISO 1833-10:2013
Tekstilije - Kvantitativna kemična analiza - 10. del: Mešanica triacetatnih ali
polilaktidnih in nekaterih drugih vlaken (metoda z uporabo diklorometana) (ISO
1833-10:2019)

Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide

with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)

Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder

Polylactidfasern mit bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-

10:2019)

Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de

polylactide avec certaines autres fibres (méthode au dichlorométhane) (ISO 1833-
10:2019)
Ta slovenski standard je istoveten z: EN ISO 1833-10:2019
ICS:
59.060.20 Umetna vlakna Man-made fibres
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 1833-10:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 1833-10:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 1833-10:2019
EN ISO 1833-10
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 59.060.01 Supersedes EN ISO 1833-10:2010
English Version
Textiles - Quantitative chemical analysis - Part 10:
Mixtures of triacetate or polylactide with certain other
fibres (method using dichloromethane) (ISO 1833-
10:2019)

Textiles - Analyse chimique quantitative - Partie 10: Textilien - Quantitative chemische Analysen - Teil 10:

Mélanges de triacétate ou de polylactide avec certaines Mischungen aus Triacetat- oder Polylactidfasern mit

autres fibres (méthode au dichlorométhane) (ISO bestimmten anderen Fasern (Dichlormethan-

1833-10:2019) Verfahren) (ISO 1833-10:2019)
This European Standard was approved by CEN on 11 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-10:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1833-10:2019
EN ISO 1833-10:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 1833-10:2019
EN ISO 1833-10:2019 (E)
European foreword

This document (EN ISO 1833-10:2019) has been prepared by Technical Committee ISO/TC 38

"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the

secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by November 2019, and conflicting national standards

shall be withdrawn at the latest by November 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 1833-10:2010.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 1833-10:2019 has been approved by CEN as EN ISO 1833-10:2019 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 1833-10:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 1833-10:2019
INTERNATIONAL ISO
STANDARD 1833-10
Second edition
2019-04
Textiles — Quantitative chemical
analysis —
Part 10:
Mixtures of triacetate or polylactide
with certain other fibres (method
using dichloromethane)
Textiles — Analyse chimique quantitative —
Partie 10: Mélanges de triacétate ou de polylactide avec certaines
autres fibres (méthode au dichlorométhane)
Reference number
ISO 1833-10:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 1833-10:2019
ISO 1833-10:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1833-10:2019
ISO 1833-10:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Reagents ........................................................................................................................................................................................................................ 1

6 Apparatus .................
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.