SIST EN 13911:2017
(Main)Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations and associated activities. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn.
Schutzkleidung für die Feuerwehr - Anforderungen und Prüfverfahren für Feuerschutzhauben für die Feuerwehr
Diese Norm legt Mindestsicherheitsanforderungen und Prüfverfahren für die bei der Brand¬bekämpfung zu tragende Feuerschutzhaube fest. Diese Norm gilt nur für Situationen, in denen zudem Schutzkleidung (EN 469), Atemschutzgeräte (EN 136 und EN 137) und Helme (EN 443) getragen werden.
Vêtements de protection pour les sapeurs-pompiers - Exigences et méthodes d'essai pour les cagoules de protection contre le feu pour sapeurs-pompiers
La présente norme spécifie les exigences de sécurité minimales et les méthodes d’essai relatives à une cagoule de protection contre le feu destinée à être portée dans le cadre d’interventions de lutte contre les incendies. La présente norme ne s’applique que lorsqu’il y a port concomitant de vêtements de protection (EN 469), d’un appareil de protection respiratoire (EN 136 et EN 137) et d’un casque (EN 443).
Zaščitna obleka za gasilce - Zahteve in preskusne metode za zaščitne kapuce za gasilce
Ta standard določa minimalne varnostne zahteve in preskusne metode za zaščitne kapuce, ki se uporabljajo pri gašenju požarov in povezanih dejavnostih. Ta standard se uporablja samo za primere, ki vključujejo tudi uporabo zaščitne obleke (EN 469), dihalnega aparata (EN 136 in EN 137) ter čelade (EN 443).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.JDVLOFHSchutzkleidung für die Feuerwehr - Anforderungen und Prüfverfahren für Feuerschutzhauben für die FeuerwehrVêtements de protection pour les sapeurs-pompiers - Exigences et méthodes d'essai pour les cagoules de protection contre le feu pour sapeurs-pompiersProtective clothing for firefighters - Requirements and test methods for fire hoods for firefighters13.340.20Varovalna oprema za glavoHead protective equipment13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 13911:2017SIST EN 13911:2017en,fr,de01-november-2017SIST EN 13911:2017SLOVENSKI
STANDARDSIST EN 13911:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13911
August
t r s y ICS
s uä u v rä t r Supersedes EN
s u { s sã t r r vEnglish Version
Protective clothing for firefighters æ Requirements and test methods for fire hoods for firefighters Vêtements de protection pour les sapeursæpompiers æ Exigences et méthodes d 5essai pour les cagoules de protection contre le feu pour sapeursæpompiers
Schutzkleidung für die Feuerwehr æ Anforderungen und Prüfverfahren für Feuerschutzhauben für die Feuerwehr This European Standard was approved by CEN on
s x March
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u { s sã t r s y ESIST EN 13911:2017
EN 13911:2017 (E) 2
Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Design and Materials . 7 4.1 Introduction . 7 4.2 General . 7 4.3 Facial opening . 7 4.4 Yoke interface area . 8 4.5 Sizing . 8 4.6 Labels . 8 4.7 Ventilation Window (optional) . 8 5 Sampling and pre-treatment . 8 6 Performance requirements . 9 6.1 Performance requirements - Material or component assembly . 9 6.1.1 General . 9 6.1.2 Flame spread . 9 6.1.3 Heat transfer (flame) . 10 6.1.4 Heat transfer (radiation) . 10 6.1.5 Residual strength of material when exposed to radiant heat . 10 6.1.6 Heat resistance . 10 6.1.7 Seam burst strength . 10 6.1.8 Dimensional change . 10 6.2 Performance requirements - Complete Firehood. 10 7 Marking . 10 8 Information supplied by the manufacturer . 11 Annex A (normative)
Uncertainty of Measurement . 12 Annex B (normative)
Donning, Doffing and shape retention test . 13 Annex C (normative)
Determination of property values . 15 Annex D (informative)
Significant technical changes between this document and the previous edition EN 13911:2004 . 16 Annex ZA (informative)
Relationship between this European Standard and the essential requirements of EU Directive 89/686/EEC aimed to be covered . 17
SIST EN 13911:2017
EN 13911:2017 (E) 3
European foreword This document (EN 13911:2017) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13911:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13911:2017
EN 13911:2017 (E) 4
Introduction This standard specifies the minimum safety requirements and test methods for a firehood worn by a firefighter following a user risk assessment. When worn with protective clothing, breathing apparatus and helmet, the design features and performance requirements of the firehood are intended to provide protection to the exposed areas of the head and neck against heat and flame. Firehoods can be used in different end uses, both over and underneath the facemask and with different shapes of helmets. It is the user’s responsibility to choose the right firehood appropriate to the garment, helmet, and facemask recommended by the hood manufacturer. SIST EN 13911:2017
EN 13911:2017 (E) 5
1 Scope This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations to protect against heat and fire. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 136:1998, Respiratory protective devices — Full face masks — Requirements, testing, marking EN 137:2006, Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking EN 443:2008, Helmets for fire fighting in buildings and other structures EN 469:2005, Protective clothing for firefighters — Performance requirements for protective clothing for firefighting EN ISO 5077:2008, Textiles — Determination of dimensional change in washing and drying (ISO 5077:2007) EN ISO 6942:2002, Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) EN ISO 9151:2016, Protective clothing against heat and flame — Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03) EN ISO 13688:2013, Protective clothing — General requirements (ISO 13688:2013) EN ISO 13938-1:1999, Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) EN ISO 14116:2015, Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) EN ISO 15025:2016, Protective clothing — Protection against flame — Method of test for limited flame spread (ISO 15025:2016) ISO 17493:2016, Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven SIST EN 13911:2017
EN 13911:2017 (E) 6
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ageing changing of the product performance over time during use or storage For example: — cleaning, maintenance or disinfecting processes; — exposure to visible and/or ultra-violet radiation; — exposure to high or low temperatures or to changing temperatures; — exposure to chemicals including humidity; — exposure to biological agents such as bacteria, fungi, insects or other pests; — exposure to mechanical action such as abrasion, flexing, pressure and strain; — exposure to contaminants such as dirt, oil, splashes of molten metal, etc; — exposure to wear and tear 3.2 cleaning process by which PPE is made serviceable and/or hygienically wearable by removing any dirt or contamination 3.3 conditioning keeping samples under standard conditions of temperature and relative humidity for a minimum period of time 3.4 firehood the firehood covers the neck and the area of the head which is not protected by the facemask Note 1 to entry: The firehood ensures the junction between the helmet and garment. 3.5 garment single item of clothing which may consist of single or multiple layers 3.6 component assembly combination of all materials of a multi-layer garment presented exactly as the finished garment construction 3.7 interface area area where individual items meet and/or overlap SIST EN 13911:2017
EN 13911:2017 (E) 7
3.8 seam permanent fastening between two or more pieces of material 3.9 pre-treatment standard way of preparing the samples before testing Note 1 to entry: This might include e.g. a number of cleaning cycles, submitting the sample to heat, mechanical action or any other relevant exposure and is finished by conditioning. 3.10 yoke area of the firehood interfacing with the coat 3.11 facial opening opening in the front of the firehood interfacing with the breathing apparatus facemask 3.12 elasticity property of a material by which it tends to recover its original size and shape immediately after the removal of the force causing deformation 3.13 material substances excluding hardware and labels, of which an item of clothing is made 4 Design and Materials 4.1 Introduction Materials used in the construction of the firehood which are likely to come into contact with the skin of the wearer shall comply with 4.2 of EN ISO 13688:2013. The design requirements specified shall be verified by visual inspection during the procedures in Annex B, unless otherwise specified in 4.2. The manufacturer shall provide information on the specific items for those that compatibility is claimed. 4.2 General The firehood shall be close fitting and able to be worn without discomfort or significant restriction to head movement. The firehood shall fit around or under the breathing apparatus facemask for which compatibility is claimed without reducing the field of view interfering with the breathing function of the mask and give no discomfort to the wearer. Overstretching will reduce the heat protective performance of the firehood and should be avoided by design. NOTE Excess material in the construction of the firehood may hamper the wearer and compromise the wearing of other personal protective equipment. 4.3 Facial opening The firehood shall have a f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.