Satellite Earth Stations and Systems (SES) - Fixed earth stations communicating with non-geostationary satellite systems in the 20 GHz and 30 GHz FSS bands - Harmonised Standard for access to radio spectrum

The present document covers requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference. The present document applies to satellite
communications Earth Stations (ES) with the following characteristics:
• The ES is designed for stationary operation.
• The ES is operating as part of a satellite network (e.g. star, mesh or point to point) used for the distribution
and/or exchange of information.
• The transmit and receive frequencies are shown in table 1.
The ES transmits within the frequency range from 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz, which is
a band allocated to the Fixed Satellite Services (FSS) (Earth-to-space) among other services. National
regulations will specify the bands available for the operation of the ES. Such regulations may designate some
parts of the frequency range 27,5 GHz to 29,1 GHz to terrestrial services such as the Fixed Service. However,
the operation of the ES may be permitted under national regulations in the 29,50 GHz to 30,00 GHz band since
this band is allocated on a primary basis to the Fixed Satellite Service.
• The ES receives in one or more frequencies within the range from 17,30 GHz to 20,20 GHz (FSS).
• The ES uses linear or circular polarization.
• The ES operates through non-geostationary satellites.
• The ES is designed for unattended operation.
• The ES is controlled and monitored by a Network Control Facility (NCF). This function may be performed
centrally (e.g. for a network of ESs with a central hub) or it could be performed within the ES for autonomous
control. The NCF is outside the scope of the present document.
• The ES operating in the 27,5 GHz to 28,6 GHz and 29,5 GHz to 30 GHz bands: epfd limits given in article 22
of the ITU Radio Regulations [i.5] apply for the ESs operating with the NGSO system for the protection of the
GSO networks (see No. 22.5D of the ITU RR [i.5]).
• ES operating in the 28,6 GHz to 29,1 GHz band: No. 9.11A of the ITU RR [i.5] applies to the NGSO network
of the ES, meaning that the NGSO will be required to coordinate with earlier filed GSO networks or NGSO
systems (See No. 5.523A of the ITU RR [i.5]).
• The ES has one or more directive antennas that track satellites.
The present document applies to the ES with its ancillary equipment and its various telecommunication ports, and when
operated within the boundary limits of the operational environmental profile as declared by the manufacturer and when
installed as required by the manufacturer's declaration or in the user documentation.
NOTE 1: Operational requirements are defined by national administrations and by relevant ECC Decisions.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Directive 2014/53/EU [i.1] may apply to equipment within the scope of the present
document.
NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org.
NOTE 3: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

Satelitske zemeljske postaje in sistemi (SES) - Fiksne zemeljske postaje, ki komunicirajo z negeostacionarnimi satelitskimi sistemi FSS v pasovih 20 GHz in 30 GHz - Harmonizirani standard za dostop do radijskega spektra

General Information

Status
Published
Public Enquiry End Date
31-Dec-2020
Publication Date
22-Feb-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Feb-2021
Due Date
16-Apr-2021
Completion Date
23-Feb-2021

Buy Standard

Standard
SIST EN 303 699 V1.1.1:2021
English language
71 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 303 699 V1.1.1 (2021-02) - Satellite Earth Stations and Systems (SES); Fixed earth stations communicating with non-geostationary satellite systems in the 20 GHz and 30 GHz FSS bands; Harmonised Standard for access to radio spectrum
English language
71 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 303 699 V1.1.0 (2020-10) - Satellite Earth Stations and Systems (SES); Fixed earth stations communicating with non-geostationary satellite systems in the 20 GHz and 30 GHz FSS bands; Harmonised Standard for access to radio spectrum
English language
71 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 303 699 V1.1.1:2021
01-april-2021
Satelitske zemeljske postaje in sistemi (SES) - Fiksne zemeljske postaje, ki
komunicirajo z negeostacionarnimi satelitskimi sistemi FSS v pasovih 20 GHz in
30 GHz - Harmonizirani standard za dostop do radijskega spektra

Satellite Earth Stations and Systems (SES) - Fixed earth stations communicating with

non-geostationary satellite systems in the 20 GHz and 30 GHz FSS bands - Harmonised

Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 699 V1.1.1 (2021-02)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST EN 303 699 V1.1.1:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 303 699 V1.1.1:2021
---------------------- Page: 2 ----------------------
SIST EN 303 699 V1.1.1:2021
ETSI EN 303 699 V1.1.1 (2021-02)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Fixed earth stations communicating with non-geostationary
satellite systems in the 20 GHz and 30 GHz FSS bands;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 303 699 V1.1.1:2021
2 ETSI EN 303 699 V1.1.1 (2021-02)
Reference
DEN/SES-00444
Keywords
antenna, earth station, FSS, harmonised
standard, non-GSO, regulation, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 303 699 V1.1.1:2021
3 ETSI EN 303 699 V1.1.1 (2021-02)
Contents

Intellectual Property Rights ................................................................................................................................ 7

Foreword ............................................................................................................................................................. 7

Modal verbs terminology .................................................................................................................................... 7

Introduction ........................................................................................................................................................ 8

1 Scope ........................................................................................................................................................ 9

2 References .............................................................................................................................................. 10

2.1 Normative references ....................................................................................................................................... 10

2.2 Informative references ...................................................................................................................................... 10

3 Definition of terms, symbols and abbreviations ..................................................................................... 11

3.1 Terms ................................................................................................................................................................ 11

3.2 Symbols ............................................................................................................................................................ 13

3.3 Abbreviations ................................................................................................................................................... 13

4 Technical requirements specifications ................................................................................................... 14

4.1 General ............................................................................................................................................................. 14

4.1.1 Environmental profile ................................................................................................................................. 14

4.1.2 Operational configurations ......................................................................................................................... 14

4.1.3 EIRP for networks of ESs ................................................................................................................ 14

Aggregate

4.1.4 Presentation of equipment for testing purposes .......................................................................................... 15

4.1.5 Choice of model for testing ........................................................................................................................ 15

4.1.6 Void ............................................................................................................................................................ 15

4.1.7 Peak pointing accuracy ............................................................................................................................... 15

4.2 Conformance requirements .............................................................................................................................. 15

4.2.1 Off-axis spurious radiation ......................................................................................................................... 15

4.2.1.1 Justification ........................................................................................................................................... 15

4.2.1.2 Specification.......................................................................................................................................... 15

4.2.1.3 Conformance tests ................................................................................................................................. 16

4.2.2 On-axis spurious radiation .......................................................................................................................... 16

4.2.2.1 Justification ........................................................................................................................................... 16

4.2.2.2 Specification.......................................................................................................................................... 17

4.2.2.2.1 "Carrier-on" radio state .................................................................................................................... 17

4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states ........................................................................ 17

4.2.2.3 Conformance tests ................................................................................................................................. 17

4.2.3 Void ............................................................................................................................................................ 17

4.2.4 Void ............................................................................................................................................................ 17

4.2.5 Carrier suppression ..................................................................................................................................... 17

4.2.5.1 Justification ........................................................................................................................................... 17

4.2.5.2 Specification.......................................................................................................................................... 18

4.2.5.3 Conformance tests ................................................................................................................................. 18

4.2.6 Antenna pointing accuracy ......................................................................................................................... 18

4.2.6.1 Purpose .................................................................................................................................................. 18

4.2.6.2 Pointing accuracy specification ............................................................................................................. 18

4.2.6.3 On-axis cross polarization isolation specification ................................................................................. 18

4.2.6.4 Conformance tests ................................................................................................................................. 18

4.2.7 Cessation of emissions ................................................................................................................................ 18

4.2.7.1 Justification ........................................................................................................................................... 18

4.2.7.2 Specification.......................................................................................................................................... 18

4.2.7.2.1 Specification 1: Mode of cessation of emissions ............................................................................. 18

4.2.7.2.2 Specification 2: Conditions under which the ES shall cease emissions........................................... 19

4.2.7.2.3 Specification 3: Cessation of emissions .......................................................................................... 19

4.2.7.2.4 Specification 4: Fault conditions ..................................................................................................... 19

4.2.7.3 Conformance tests ................................................................................................................................. 20

4.2.8 Control and Monitoring Functions (CMFs) ................................................................................................ 20

4.2.8.1 ES States ............................................................................................................................................... 20

4.2.8.1.1 General ............................................................................................................................................ 20

ETSI
---------------------- Page: 5 ----------------------
SIST EN 303 699 V1.1.1:2021
4 ETSI EN 303 699 V1.1.1 (2021-02)

4.2.8.1.2 CMF state diagram .......................................................................................................................... 21

4.2.8.2 Processor monitoring ............................................................................................................................ 22

4.2.8.2.1 Justification ..................................................................................................................................... 22

4.2.8.2.2 Specification .................................................................................................................................... 22

4.2.8.2.3 Conformance tests ........................................................................................................................... 22

4.2.8.3 Transmit subsystem monitoring ............................................................................................................ 23

4.2.8.3.1 Justification ..................................................................................................................................... 23

4.2.8.3.2 Specification .................................................................................................................................... 23

4.2.8.3.3 Conformance tests ........................................................................................................................... 23

4.2.8.4 Power-on/Reset ..................................................................................................................................... 23

4.2.8.4.1 Justification ..................................................................................................................................... 23

4.2.8.4.2 Specification .................................................................................................................................... 23

4.2.8.4.3 Conformance tests ........................................................................................................................... 23

4.2.8.5 Control Channel (CC) and Response Channel (RC) ............................................................................. 23

4.2.8.5.1 Justification ..................................................................................................................................... 23

4.2.8.5.2 Specification .................................................................................................................................... 23

4.2.8.5.3 Conformance tests ........................................................................................................................... 24

4.2.8.6 Network control commands .................................................................................................................. 24

4.2.8.6.1 Justification ..................................................................................................................................... 24

4.2.8.6.2 Specification .................................................................................................................................... 24

4.2.8.6.3 Conformance tests ........................................................................................................................... 25

4.2.8.7 Initial burst transmission ....................................................................................................................... 25

4.2.8.7.1 Justification ..................................................................................................................................... 25

4.2.8.7.2 Specification .................................................................................................................................... 25

4.2.8.7.3 Conformance tests ........................................................................................................................... 25

4.2.8.8 Inhibition of transmissions .................................................................................................................... 25

4.2.8.8.1 Justification ..................................................................................................................................... 25

4.2.8.8.2 Specification .................................................................................................................................... 25

4.2.8.8.3 Conformance tests ........................................................................................................................... 26

4.2.9 Receive antenna off-axis gain pattern ......................................................................................................... 26

4.2.9.1 Justification ........................................................................................................................................... 26

4.2.9.2 Specification.......................................................................................................................................... 26

4.2.9.3 Conformance tests ................................................................................................................................. 26

4.2.10 Blocking performance ................................................................................................................................. 26

4.2.10.1 Justification ........................................................................................................................................... 26

4.2.10.2 Specification.......................................................................................................................................... 27

4.2.10.3 Conformance tests ................................................................................................................................. 27

4.2.11 Adjacent Signal Selectivity ......................................................................................................................... 27

4.2.11.1 Justification ........................................................................................................................................... 27

4.2.11.2 Specification.......................................................................................................................................... 27

4.2.11.3 Conformance tests ................................................................................................................................. 27

4.2.12 Image frequency rejection .......................................................................................................................... 28

4.2.12.1 Justification ........................................................................................................................................... 28

4.2.12.2 Specification.......................................................................................................................................... 28

4.2.12.3 Conformance tests ................................................................................................................................. 28

5 Testing for compliance with technical requirements .............................................................................. 28

5.1 Environmental conditions for testing ............................................................................................................... 28

5.2 Ancillary Equipment ........................................................................................................................................ 28

5.3 Nominated Bandwidth ...................................................................................................................................... 28

5.4 Interpretation of the measurement results ........................................................................................................ 29

6 Test methods for all aspects of the ES.................................................................................................... 29

6.1 General ............................................................................................................................................................. 29

6.1.1 General requirements .................................................................................................................................. 29

6.1.2 Special considerations for the interpretation of measurement results ......................................................... 29

6.1.3 Measuring receiver ..................................................................................................................................... 30

6.2 Off-axis spurious radiation ............................................................................................................................... 31

6.2.1 General ........................................................................................................................................................ 31

6.2.2 Test method ................................................................................................................................................ 31

6.2.2.1 General .................................................................................................................................................. 31

6.2.2.2 Multi-carrier operation .......................................................................................................................... 31

ETSI
---------------------- Page: 6 ----------------------
SIST EN 303 699 V1.1.1:2021
5 ETSI EN 303 699 V1.1.1 (2021-02)

6.2.3 Measurements up to 1 000 MHz ................................................................................................................. 32

6.2.3.1 Test site ................................................................................................................................................. 32

6.2.3.2 Measuring receivers .............................................................................................................................. 32

6.2.3.3 Procedure .............................................................................................................................................. 32

6.2.4 Measurements above 1 000 MHz ............................................................................................................... 32

6.2.4.1 General .................................................................................................................................................. 32

6.2.4.2 Identification of the significant frequencies of spurious radiation ........................................................ 33

6.2.4.2.1 Test site............................................................................................................................................ 33

6.2.4.2.2 Procedure ......................................................................................................................................... 33

6.2.4.3 Measurement of radiated power levels of identified spurious radiation ................................................ 33

6.2.4.3.1 Test site............................................................................................................................................ 33

6.2.4.3.2 Procedure ......................................................................................................................................... 34

6.2.4.4 Measurement of conducted spurious radiation at the antenna flange .................................................... 35

6.2.4.4.1 Test site............................................................................................................................................ 35

6.2.4.4.2 Procedure ......................................................................................................................................... 35

6.3 On-axis spurious radiation ................................................................................................................................ 36

6.3.1 Test method ................................................................................................................................................ 36

6.3.1.1 General .................................................................................................................................................. 36

6.3.1.2 Test site ................................................................................................................................................. 36

6.3.1.3 Method of measurement ........................................................................................................................ 36

6.3.1.3.1 General ............................................................................................................................................ 36

6.3.1.3.2 Method of measurement at the antenna flange ................................................................................ 36

6.3.1.3.3 Method of measurement for an EUT with antenna .......................................................................... 38

6.4 Void .................................................................................................................................................................. 39

6.5 Carrier suppression ........................................................................................................................................... 39

6.5.1 General ........................................................................................................................................................ 39

6.5.2 Test method ................................................................................................................................................ 39

6.6 Antenna pointing .............................................................................................................................................. 40

6.6.1 General ........................................................................................................................................................ 40

6.6.2 Test method ................................................................................................................................................ 40

6.7 Polarization angle alignment capability ........................................................................................................... 41

6.7.1 General ........................................................................................................................................................ 41

6.7.2 Test site ....................................................................................................................................................... 41

6.7.3 Procedure .................................................................................................................................................... 41

6.8 Cessation of emissions of the ES ...................................................................................................................... 42

6.8.1 General ........................................................................................................................................................ 42

6.8.2 Test Method ................................................................................................................................................ 42

6.8.2.1 Required documentation ....................................................................................................................... 42

6.8.2.2 Cessation of emissions from the "Transmission enabled" state ............................................................ 42

6.8.2.3 Cessation of emission from the "Transmission disabled" state ............................................................. 42

6.8.2.4 Cessation of emission from the "Initial Phase" state ............................................................................. 43

6.8.2.4.1 EUTs transmitting initial bursts ....................................................................................................... 43

6.8.2.4.2 EUTs not transmitting initial bursts ................................................................................................. 43

6.8.2.5 "Single action" means of cessation of emissions................................................................................... 43

6.8.2.6 Fault conditions ..................................................................................................................................... 44

6.9 Control and monitoring functions .................................................................................................................... 44

6.9.1 General ........................................................................................................................................................ 44

6.9.2 Test arrangement ........................................................................................................................................ 45

6.9.3 Processor monitoring- Test method ............................................................................................................ 45

...

ETSI EN 303 699 V1.1.1 (2021-02)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Fixed earth stations communicating with non-geostationary
satellite systems in the 20 GHz and 30 GHz FSS bands;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 303 699 V1.1.1 (2021-02)
Reference
DEN/SES-00444
Keywords
antenna, earth station, FSS, harmonised
standard, non-GSO, regulation, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 303 699 V1.1.1 (2021-02)
Contents

Intellectual Property Rights ................................................................................................................................ 7

Foreword ............................................................................................................................................................. 7

Modal verbs terminology .................................................................................................................................... 7

Introduction ........................................................................................................................................................ 8

1 Scope ........................................................................................................................................................ 9

2 References .............................................................................................................................................. 10

2.1 Normative references ....................................................................................................................................... 10

2.2 Informative references ...................................................................................................................................... 10

3 Definition of terms, symbols and abbreviations ..................................................................................... 11

3.1 Terms ................................................................................................................................................................ 11

3.2 Symbols ............................................................................................................................................................ 13

3.3 Abbreviations ................................................................................................................................................... 13

4 Technical requirements specifications ................................................................................................... 14

4.1 General ............................................................................................................................................................. 14

4.1.1 Environmental profile ................................................................................................................................. 14

4.1.2 Operational configurations ......................................................................................................................... 14

4.1.3 EIRP for networks of ESs ................................................................................................................ 14

Aggregate

4.1.4 Presentation of equipment for testing purposes .......................................................................................... 15

4.1.5 Choice of model for testing ........................................................................................................................ 15

4.1.6 Void ............................................................................................................................................................ 15

4.1.7 Peak pointing accuracy ............................................................................................................................... 15

4.2 Conformance requirements .............................................................................................................................. 15

4.2.1 Off-axis spurious radiation ......................................................................................................................... 15

4.2.1.1 Justification ........................................................................................................................................... 15

4.2.1.2 Specification.......................................................................................................................................... 15

4.2.1.3 Conformance tests ................................................................................................................................. 16

4.2.2 On-axis spurious radiation .......................................................................................................................... 16

4.2.2.1 Justification ........................................................................................................................................... 16

4.2.2.2 Specification.......................................................................................................................................... 17

4.2.2.2.1 "Carrier-on" radio state .................................................................................................................... 17

4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states ........................................................................ 17

4.2.2.3 Conformance tests ................................................................................................................................. 17

4.2.3 Void ............................................................................................................................................................ 17

4.2.4 Void ............................................................................................................................................................ 17

4.2.5 Carrier suppression ..................................................................................................................................... 17

4.2.5.1 Justification ........................................................................................................................................... 17

4.2.5.2 Specification.......................................................................................................................................... 18

4.2.5.3 Conformance tests ................................................................................................................................. 18

4.2.6 Antenna pointing accuracy ......................................................................................................................... 18

4.2.6.1 Purpose .................................................................................................................................................. 18

4.2.6.2 Pointing accuracy specification ............................................................................................................. 18

4.2.6.3 On-axis cross polarization isolation specification ................................................................................. 18

4.2.6.4 Conformance tests ................................................................................................................................. 18

4.2.7 Cessation of emissions ................................................................................................................................ 18

4.2.7.1 Justification ........................................................................................................................................... 18

4.2.7.2 Specification.......................................................................................................................................... 18

4.2.7.2.1 Specification 1: Mode of cessation of emissions ............................................................................. 18

4.2.7.2.2 Specification 2: Conditions under which the ES shall cease emissions........................................... 19

4.2.7.2.3 Specification 3: Cessation of emissions .......................................................................................... 19

4.2.7.2.4 Specification 4: Fault conditions ..................................................................................................... 19

4.2.7.3 Conformance tests ................................................................................................................................. 20

4.2.8 Control and Monitoring Functions (CMFs) ................................................................................................ 20

4.2.8.1 ES States ............................................................................................................................................... 20

4.2.8.1.1 General ............................................................................................................................................ 20

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 303 699 V1.1.1 (2021-02)

4.2.8.1.2 CMF state diagram .......................................................................................................................... 21

4.2.8.2 Processor monitoring ............................................................................................................................ 22

4.2.8.2.1 Justification ..................................................................................................................................... 22

4.2.8.2.2 Specification .................................................................................................................................... 22

4.2.8.2.3 Conformance tests ........................................................................................................................... 22

4.2.8.3 Transmit subsystem monitoring ............................................................................................................ 23

4.2.8.3.1 Justification ..................................................................................................................................... 23

4.2.8.3.2 Specification .................................................................................................................................... 23

4.2.8.3.3 Conformance tests ........................................................................................................................... 23

4.2.8.4 Power-on/Reset ..................................................................................................................................... 23

4.2.8.4.1 Justification ..................................................................................................................................... 23

4.2.8.4.2 Specification .................................................................................................................................... 23

4.2.8.4.3 Conformance tests ........................................................................................................................... 23

4.2.8.5 Control Channel (CC) and Response Channel (RC) ............................................................................. 23

4.2.8.5.1 Justification ..................................................................................................................................... 23

4.2.8.5.2 Specification .................................................................................................................................... 23

4.2.8.5.3 Conformance tests ........................................................................................................................... 24

4.2.8.6 Network control commands .................................................................................................................. 24

4.2.8.6.1 Justification ..................................................................................................................................... 24

4.2.8.6.2 Specification .................................................................................................................................... 24

4.2.8.6.3 Conformance tests ........................................................................................................................... 25

4.2.8.7 Initial burst transmission ....................................................................................................................... 25

4.2.8.7.1 Justification ..................................................................................................................................... 25

4.2.8.7.2 Specification .................................................................................................................................... 25

4.2.8.7.3 Conformance tests ........................................................................................................................... 25

4.2.8.8 Inhibition of transmissions .................................................................................................................... 25

4.2.8.8.1 Justification ..................................................................................................................................... 25

4.2.8.8.2 Specification .................................................................................................................................... 25

4.2.8.8.3 Conformance tests ........................................................................................................................... 26

4.2.9 Receive antenna off-axis gain pattern ......................................................................................................... 26

4.2.9.1 Justification ........................................................................................................................................... 26

4.2.9.2 Specification.......................................................................................................................................... 26

4.2.9.3 Conformance tests ................................................................................................................................. 26

4.2.10 Blocking performance ................................................................................................................................. 26

4.2.10.1 Justification ........................................................................................................................................... 26

4.2.10.2 Specification.......................................................................................................................................... 27

4.2.10.3 Conformance tests ................................................................................................................................. 27

4.2.11 Adjacent Signal Selectivity ......................................................................................................................... 27

4.2.11.1 Justification ........................................................................................................................................... 27

4.2.11.2 Specification.......................................................................................................................................... 27

4.2.11.3 Conformance tests ................................................................................................................................. 27

4.2.12 Image frequency rejection .......................................................................................................................... 28

4.2.12.1 Justification ........................................................................................................................................... 28

4.2.12.2 Specification.......................................................................................................................................... 28

4.2.12.3 Conformance tests ................................................................................................................................. 28

5 Testing for compliance with technical requirements .............................................................................. 28

5.1 Environmental conditions for testing ............................................................................................................... 28

5.2 Ancillary Equipment ........................................................................................................................................ 28

5.3 Nominated Bandwidth ...................................................................................................................................... 28

5.4 Interpretation of the measurement results ........................................................................................................ 29

6 Test methods for all aspects of the ES.................................................................................................... 29

6.1 General ............................................................................................................................................................. 29

6.1.1 General requirements .................................................................................................................................. 29

6.1.2 Special considerations for the interpretation of measurement results ......................................................... 29

6.1.3 Measuring receiver ..................................................................................................................................... 30

6.2 Off-axis spurious radiation ............................................................................................................................... 31

6.2.1 General ........................................................................................................................................................ 31

6.2.2 Test method ................................................................................................................................................ 31

6.2.2.1 General .................................................................................................................................................. 31

6.2.2.2 Multi-carrier operation .......................................................................................................................... 31

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 303 699 V1.1.1 (2021-02)

6.2.3 Measurements up to 1 000 MHz ................................................................................................................. 32

6.2.3.1 Test site ................................................................................................................................................. 32

6.2.3.2 Measuring receivers .............................................................................................................................. 32

6.2.3.3 Procedure .............................................................................................................................................. 32

6.2.4 Measurements above 1 000 MHz ............................................................................................................... 32

6.2.4.1 General .................................................................................................................................................. 32

6.2.4.2 Identification of the significant frequencies of spurious radiation ........................................................ 33

6.2.4.2.1 Test site............................................................................................................................................ 33

6.2.4.2.2 Procedure ......................................................................................................................................... 33

6.2.4.3 Measurement of radiated power levels of identified spurious radiation ................................................ 33

6.2.4.3.1 Test site............................................................................................................................................ 33

6.2.4.3.2 Procedure ......................................................................................................................................... 34

6.2.4.4 Measurement of conducted spurious radiation at the antenna flange .................................................... 35

6.2.4.4.1 Test site............................................................................................................................................ 35

6.2.4.4.2 Procedure ......................................................................................................................................... 35

6.3 On-axis spurious radiation ................................................................................................................................ 36

6.3.1 Test method ................................................................................................................................................ 36

6.3.1.1 General .................................................................................................................................................. 36

6.3.1.2 Test site ................................................................................................................................................. 36

6.3.1.3 Method of measurement ........................................................................................................................ 36

6.3.1.3.1 General ............................................................................................................................................ 36

6.3.1.3.2 Method of measurement at the antenna flange ................................................................................ 36

6.3.1.3.3 Method of measurement for an EUT with antenna .......................................................................... 38

6.4 Void .................................................................................................................................................................. 39

6.5 Carrier suppression ........................................................................................................................................... 39

6.5.1 General ........................................................................................................................................................ 39

6.5.2 Test method ................................................................................................................................................ 39

6.6 Antenna pointing .............................................................................................................................................. 40

6.6.1 General ........................................................................................................................................................ 40

6.6.2 Test method ................................................................................................................................................ 40

6.7 Polarization angle alignment capability ........................................................................................................... 41

6.7.1 General ........................................................................................................................................................ 41

6.7.2 Test site ....................................................................................................................................................... 41

6.7.3 Procedure .................................................................................................................................................... 41

6.8 Cessation of emissions of the ES ...................................................................................................................... 42

6.8.1 General ........................................................................................................................................................ 42

6.8.2 Test Method ................................................................................................................................................ 42

6.8.2.1 Required documentation ....................................................................................................................... 42

6.8.2.2 Cessation of emissions from the "Transmission enabled" state ............................................................ 42

6.8.2.3 Cessation of emission from the "Transmission disabled" state ............................................................. 42

6.8.2.4 Cessation of emission from the "Initial Phase" state ............................................................................. 43

6.8.2.4.1 EUTs transmitting initial bursts ....................................................................................................... 43

6.8.2.4.2 EUTs not transmitting initial bursts ................................................................................................. 43

6.8.2.5 "Single action" means of cessation of emissions................................................................................... 43

6.8.2.6 Fault conditions ..................................................................................................................................... 44

6.9 Control and monitoring functions .................................................................................................................... 44

6.9.1 General ........................................................................................................................................................ 44

6.9.2 Test arrangement ........................................................................................................................................ 45

6.9.3 Processor monitoring- Test method ............................................................................................................ 45

6.9.4 Transmit subsystem monitoring-Test method ............................................................................................. 45

6.9.5 Power-on/Reset-Test method ...................................................................................................................... 45

6.9.6 Control Channel and Response Channel -Test method ............................................................................... 46

6.9.7 Network Control commands-Test method .................................................................................................. 46

6.9.8 Initial burst transmission-Test method ........................................................................................................ 48

6.9.9 Inhibition of transmission-Test method ...................................................................................................... 48

6.10 Receive antenna off-axis gain pattern .............................................................................................................. 48

6.10.1 Test method ....................................................
...

Draft ETSI EN 303 699 V1.1.0 (2020-10)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Fixed earth stations communicating with non-geostationary
satellite systems in the 20 GHz and 30 GHz FSS bands;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 699 V1.1.0 (2020-10)
Reference
DEN/SES-00444
Keywords
antenna, earth station, FSS, harmonised
standard, non-GSO, regulation, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 699 V1.1.0 (2020-10)
Contents

Intellectual Property Rights ................................................................................................................................ 7

Foreword ............................................................................................................................................................. 7

Modal verbs terminology .................................................................................................................................... 7

Introduction ........................................................................................................................................................ 8

1 Scope ........................................................................................................................................................ 9

2 References .............................................................................................................................................. 10

2.1 Normative references ....................................................................................................................................... 10

2.2 Informative references ...................................................................................................................................... 10

3 Definition of terms, symbols and abbreviations ..................................................................................... 11

3.1 Terms ................................................................................................................................................................ 11

3.2 Symbols ............................................................................................................................................................ 13

3.3 Abbreviations ................................................................................................................................................... 13

4 Technical requirements specifications ................................................................................................... 14

4.1 General ............................................................................................................................................................. 14

4.1.1 Environmental profile ................................................................................................................................. 14

4.1.2 Operational configurations ......................................................................................................................... 14

4.1.3 EIRP for networks of ESs ................................................................................................................ 14

Aggregate

4.1.4 Presentation of equipment for testing purposes .......................................................................................... 15

4.1.5 Choice of model for testing ........................................................................................................................ 15

4.1.6 Void ............................................................................................................................................................ 15

4.1.7 Peak pointing accuracy ............................................................................................................................... 15

4.2 Conformance requirements .............................................................................................................................. 15

4.2.1 Off-axis spurious radiation ......................................................................................................................... 15

4.2.1.1 Justification ........................................................................................................................................... 15

4.2.1.2 Specification.......................................................................................................................................... 15

4.2.1.3 Conformance tests ................................................................................................................................. 16

4.2.2 On-axis spurious radiation .......................................................................................................................... 16

4.2.2.1 Justification ........................................................................................................................................... 16

4.2.2.2 Specification.......................................................................................................................................... 17

4.2.2.2.1 "Carrier-on" radio state .................................................................................................................... 17

4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states ........................................................................ 17

4.2.2.3 Conformance tests ................................................................................................................................. 17

4.2.3 Void ............................................................................................................................................................ 17

4.2.4 Void ............................................................................................................................................................ 17

4.2.5 Carrier suppression ..................................................................................................................................... 17

4.2.5.1 Justification ........................................................................................................................................... 17

4.2.5.2 Specification.......................................................................................................................................... 18

4.2.5.3 Conformance tests ................................................................................................................................. 18

4.2.6 Antenna pointing accuracy ......................................................................................................................... 18

4.2.6.1 Purpose .................................................................................................................................................. 18

4.2.6.2 Pointing accuracy specification ............................................................................................................. 18

4.2.6.3 On-axis cross polarization isolation specification ................................................................................. 18

4.2.6.4 Conformance tests ................................................................................................................................. 18

4.2.7 Cessation of emissions ................................................................................................................................ 18

4.2.7.1 Justification ........................................................................................................................................... 18

4.2.7.2 Specification.......................................................................................................................................... 18

4.2.7.2.1 Specification 1: Mode of cessation of emissions ............................................................................. 18

4.2.7.2.2 Specification 2: Conditions under which the ES shall cease emissions........................................... 19

4.2.7.2.3 Specification 3: Cessation of emissions .......................................................................................... 19

4.2.7.2.4 Specification 4: Fault conditions ..................................................................................................... 19

4.2.7.3 Conformance tests ................................................................................................................................. 20

4.2.8 Control and Monitoring Functions (CMFs) ................................................................................................ 20

4.2.8.1 ES States ............................................................................................................................................... 20

4.2.8.1.1 General ............................................................................................................................................ 20

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 699 V1.1.0 (2020-10)

4.2.8.1.2 CMF state diagram .......................................................................................................................... 21

4.2.8.2 Processor monitoring ............................................................................................................................ 22

4.2.8.2.1 Justification ..................................................................................................................................... 22

4.2.8.2.2 Specification .................................................................................................................................... 22

4.2.8.2.3 Conformance tests ........................................................................................................................... 22

4.2.8.3 Transmit subsystem monitoring ............................................................................................................ 23

4.2.8.3.1 Justification ..................................................................................................................................... 23

4.2.8.3.2 Specification .................................................................................................................................... 23

4.2.8.3.3 Conformance tests ........................................................................................................................... 23

4.2.8.4 Power-on/Reset ..................................................................................................................................... 23

4.2.8.4.1 Justification ..................................................................................................................................... 23

4.2.8.4.2 Specification .................................................................................................................................... 23

4.2.8.4.3 Conformance tests ........................................................................................................................... 23

4.2.8.5 Control Channel (CC) and Response Channel (RC) ............................................................................. 23

4.2.8.5.1 Justification ..................................................................................................................................... 23

4.2.8.5.2 Specification .................................................................................................................................... 23

4.2.8.5.3 Conformance tests ........................................................................................................................... 24

4.2.8.6 Network control commands .................................................................................................................. 24

4.2.8.6.1 Justification ..................................................................................................................................... 24

4.2.8.6.2 Specification .................................................................................................................................... 24

4.2.8.6.3 Conformance tests ........................................................................................................................... 25

4.2.8.7 Initial burst transmission ....................................................................................................................... 25

4.2.8.7.1 Justification ..................................................................................................................................... 25

4.2.8.7.2 Specification .................................................................................................................................... 25

4.2.8.7.3 Conformance tests ........................................................................................................................... 25

4.2.8.8 Inhibition of transmissions .................................................................................................................... 25

4.2.8.8.1 Justification ..................................................................................................................................... 25

4.2.8.8.2 Specification .................................................................................................................................... 25

4.2.8.8.3 Conformance tests ........................................................................................................................... 26

4.2.9 Receive antenna off-axis gain pattern ......................................................................................................... 26

4.2.9.1 Justification ........................................................................................................................................... 26

4.2.9.2 Specification.......................................................................................................................................... 26

4.2.9.3 Conformance tests ................................................................................................................................. 26

4.2.10 Blocking performance ................................................................................................................................. 26

4.2.10.1 Justification ........................................................................................................................................... 26

4.2.10.2 Specification.......................................................................................................................................... 27

4.2.10.3 Conformance tests ................................................................................................................................. 27

4.2.11 Adjacent Signal Selectivity ......................................................................................................................... 27

4.2.11.1 Justification ........................................................................................................................................... 27

4.2.11.2 Specification.......................................................................................................................................... 27

4.2.11.3 Conformance tests ................................................................................................................................. 27

4.2.12 Image frequency rejection .......................................................................................................................... 28

4.2.12.1 Justification ........................................................................................................................................... 28

4.2.12.2 Specification.......................................................................................................................................... 28

4.2.12.3 Conformance tests ................................................................................................................................. 28

5 Testing for compliance with technical requirements .............................................................................. 28

5.1 Environmental conditions for testing ............................................................................................................... 28

5.2 Ancillary Equipment ........................................................................................................................................ 28

5.3 Nominated Bandwidth ...................................................................................................................................... 28

5.4 Interpretation of the measurement results ........................................................................................................ 29

6 Test methods for all aspects of the ES.................................................................................................... 29

6.1 General ............................................................................................................................................................. 29

6.1.1 General requirements .................................................................................................................................. 29

6.1.2 Special considerations for the interpretation of measurement results ......................................................... 29

6.1.3 Measuring receiver ..................................................................................................................................... 30

6.2 Off-axis spurious radiation ............................................................................................................................... 31

6.2.1 General ........................................................................................................................................................ 31

6.2.2 Test method ................................................................................................................................................ 31

6.2.2.1 General .................................................................................................................................................. 31

6.2.2.2 Multi-carrier operation .......................................................................................................................... 31

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 699 V1.1.0 (2020-10)

6.2.3 Measurements up to 1 000 MHz ................................................................................................................. 32

6.2.3.1 Test site ................................................................................................................................................. 32

6.2.3.2 Measuring receivers .............................................................................................................................. 32

6.2.3.3 Procedure .............................................................................................................................................. 32

6.2.4 Measurements above 1 000 MHz ............................................................................................................... 32

6.2.4.1 General .................................................................................................................................................. 32

6.2.4.2 Identification of the significant frequencies of spurious radiation ........................................................ 33

6.2.4.2.1 Test site............................................................................................................................................ 33

6.2.4.2.2 Procedure ......................................................................................................................................... 33

6.2.4.3 Measurement of radiated power levels of identified spurious radiation ................................................ 33

6.2.4.3.1 Test site............................................................................................................................................ 33

6.2.4.3.2 Procedure ......................................................................................................................................... 34

6.2.4.4 Measurement of conducted spurious radiation at the antenna flange .................................................... 35

6.2.4.4.1 Test site............................................................................................................................................ 35

6.2.4.4.2 Procedure ......................................................................................................................................... 35

6.3 On-axis spurious radiation ................................................................................................................................ 36

6.3.1 Test method ................................................................................................................................................ 36

6.3.1.1 General .................................................................................................................................................. 36

6.3.1.2 Test site ................................................................................................................................................. 36

6.3.1.3 Method of measurement ........................................................................................................................ 36

6.3.1.3.1 General ............................................................................................................................................ 36

6.3.1.3.2 Method of measurement at the antenna flange ................................................................................ 36

6.3.1.3.3 Method of measurement for an EUT with antenna .......................................................................... 38

6.4 Void .................................................................................................................................................................. 39

6.5 Carrier suppression ........................................................................................................................................... 39

6.5.1 General ........................................................................................................................................................ 39

6.5.2 Test method ................................................................................................................................................ 39

6.6 Antenna pointing .............................................................................................................................................. 40

6.6.1 General ........................................................................................................................................................ 40

6.6.2 Test method ................................................................................................................................................ 40

6.7 Polarization angle alignment capability ........................................................................................................... 41

6.7.1 General ........................................................................................................................................................ 41

6.7.2 Test site ....................................................................................................................................................... 41

6.7.3 Procedure .................................................................................................................................................... 41

6.8 Cessation of emissions of the ES ...................................................................................................................... 42

6.8.1 General ........................................................................................................................................................ 42

6.8.2 Test Method ................................................................................................................................................ 42

6.8.2.1 Required documentation ....................................................................................................................... 42

6.8.2.2 Cessation of emissions from the "Transmission enabled" state ............................................................ 42

6.8.2.3 Cessation of emission from the "Transmission disabled" state ............................................................. 42

6.8.2.4 Cessation of emission from the "Initial Phase" state ............................................................................. 43

6.8.2.4.1 EUTs transmitting initial bursts ....................................................................................................... 43

6.8.2.4.2 EUTs not transmitting initial bursts ................................................................................................. 43

6.8.2.5 "Single action" means of cessation of emissions................................................................................... 43

6.8.2.6 Fault conditions ..................................................................................................................................... 44

6.9 Control and monitoring functions .................................................................................................................... 44

6.9.1 General ........................................................................................................................................................ 44

6.9.2 Test arrangement ........................................................................................................................................ 45

6.9.3 Processor monitoring- Test method ............................................................................................................ 45

6.9.4 Transmit subsystem monitoring-Test method ............................................................................................. 45

6.9.5 Power-on/Reset-Test method ...................................................................................................................... 45

6.9.6 Control Channel and Response Channel -Test method ............................................................................... 46

6.9.7 Network Control commands-Test method .................................................................................................. 46

6.9.8 Initial burst transmission-Test method ........................................................................................................ 48

6.9.9 Inhibition of transmission-Test method ...................................................................................................... 48

6.10 Receive antenna off-axis gain pattern .............................................................................................................. 48

6.10.1 Test method ......................
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.