Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015/A1:2018)

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confirmed that the request for assessment will be accepted but asked to  issue a new request by CCMC. CCMC made a new request. The indicative deadline to receive it: 2019-06-12
2019-04-19 JF: EC clarified that HAS Consutlants will carry out the assessment of the corrected Annex ZZ. NEXT ACTION: HAS CONSULTANT ASSESSMENT EXPECTED BY 2019-05-23.
2019-01-30 Assessment request rejected by HAS Consultants on the grounds that it is a second requset at this stage. CCMC asked the EC to clarify.
2019-

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-11: Besondere Anforderungen für handgeführte hin- und hergehende Sägen (IEC 62841-2-11:2015/A1:2018)

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-11: Exigences particulières pour les scies alternatives portatives (IEC 62841-2-11:2015/A1:2018)

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-11. del: Posebne zahteve za ročne povratne žage (vbodne in sabljaste žage) - Dopolnilo A1 (IEC 62841-2-11:2015/A1:2018)

General Information

Status
Published
Publication Date
09-Jun-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jun-2020
Due Date
10-Aug-2020
Completion Date
10-Jun-2020

RELATIONS

Buy Standard

Amendment
SIST EN 62841-2-11:2016/A1:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62841-2-11:2016/A1:2020
01-september-2020

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-

11. del: Posebne zahteve za ročne povratne žage (vbodne in sabljaste žage) -
Dopolnilo A1 (IEC 62841-2-11:2015/A1:2018)
Electric motor-operated hand-held tools, transportable tools and lawn and garden

machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws

(IEC 62841-2-11:2015/A1:2018)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 2-11: Besondere Anforderungen für
handgeführte hin- und hergehende Sägen (IEC 62841-2-11:2015/A1:2018)

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -

Sécurité - Partie 2-11: Exigences particulières pour les scies alternatives portatives (IEC

62841-2-11:2015/A1:2018)
Ta slovenski standard je istoveten z: EN 62841-2-11:2016/A1:2020
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
SIST EN 62841-2-11:2016/A1:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62841-2-11:2016/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 62841-2-11:2016/A1:2020
EUROPEAN STANDARD EN 62841-2-11:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 25.140.20; 25.140.30
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-11: Particular
requirements for hand-held reciprocating saws
(IEC 62841-2-11:2015/A1:2018)

Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,

pour jardins et pelouses - Sécurité - Partie 2-11: Exigences transportable Werkzeuge und Rasen- und

particulières pour les scies alternatives portatives Gartenmaschinen - Sicherheit - Teil 2-11: Besondere

(IEC 62841-2-11:2015/A1:2018) Anforderungen für handgeführte hin- und hergehende
Sägen (Stichsägen und Säbelsägen)
(IEC 62841-2-11:2015/A1:2018)

This amendment A1 modifies the European Standard EN 62841-2-11:2016; it was approved by CENELEC on 2018-02-23. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62841-2-11:2016/A1:2020 E
---------------------- Page: 3 ----------------------
SIST EN 62841-2-11:2016/A1:2020
EN 62841-2-11:2016/A1:2020 (E)
European foreword

The text of document 116/353/FDIS, future IEC 62841-2-11/A1, prepared by IEC/TC 116 "Safety of

motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by

CENELEC as EN 62841-2-11:2016/A1:2020.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2020-11-29

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2023-05-29

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission

and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s), see informative Annex ZZ, included in this document.

Endorsement notice

The text of the International Standard IEC 62841-2-11:2015/A1:2018 was approved by CENELEC as

a European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 62841-2-11:2016/A1:2020
EN 62841-2-11:2016/A1:2020 (E)
Annex ZZ
(informative)
Relationship between this European Standard and the essential requirements
of Directive 2006/42/EC [2006 OJ L157] aimed to be covered

This European Standard has been prepared under a Commission’s standardisation request M/396 to

provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the

European Parliament and of the Council of 17 May 2006 on machinery, and amending
Directive 95/16/EC.

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding essential requirements

of that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European Standard
and Annex I of Directive 2006/42/EC
Essential Requirements of Clause(s) / sub-clause(s) Remarks / Notes:
Directive 2006/42/EC of this EN
Clause numbers of Annex I
1.1.2 4
(Principles of safety integration)
1.1.3 5, 6.1, 21.6, K/L.5, L.21
(Materials and products)
1.1.5 19.4
(Design of machinery to facilitate its
handling)
1.1.6 5, 19.5, 21.18.1, K/L.5, L.21
(Ergonomics)
1.2.1 5, 18.6, 18.8, 23.1.6, 23.1.10,
(Safety and reliability of control 23.1.11, 23.3, K/L.5, K.18.6,
systems) K/L.18.8, K/L.23.1.10, K.23.1.201,
L.18
1.2.2 5, 8.5, 8.9, 8.10, 8.11, 21.1, 21.2,
(Control devices) 21.4, 21.17, 21.18, K/L.5,
K.21.17.1.2, L.21
1.2.3 5, 21.17, K/L.5, K.21.17.1.2, L.21
(Starting)
1.2.4.1 5, 21.17, K/L.5, K.21.17.1.2, L.21
(Normal stop)
1.2.6 5, 21.18.1.Z1, 23.3, K/L.5, L.21
(Failure of the power supply)
1.3.2 5, 8.14.2 c), 13.1, 14.4, 17., 20,
(Risk of break-up during operation) 21.23, 24.11, 24.12, 24.13, 27,
K/L.5, K/L.13.1, K/L.17, K/L.20,
K/L.24.201, K.27.1, L.21
1.3.3 5, 18.3, K/L.5, L.18
(Risk due to falling or ejected objects)
---------------------- Page: 5 ----------------------
SIST EN 62841-2-11:2016/A1:2020
EN 62841-2-11:2016/A1:2020 (E)
Essential Requirements of Clause(s) / sub-clause(s) Remarks / Notes:
Directive 2006/42/EC of this EN
Clause numbers of Annex I
1.3.4 19.2, 19.101, 21.24, L.21
(Risks due to surfaces, edges or
angles)
1.3.7 5, 19.1, 19.3, K/L.5
(Risks related to moving parts)
1.3.8.1 5, 19.1, 19.3, K/L.5
(Moving transmission parts)
1.3.8.2 5, 19.1, K/L.5
(Moving parts involved in the process)
1.4.1 5, 19.1, 19.101, 20.1, 20.2, 20.3,
(General requirements (for guards 20.4, 21.22, K/L.5, K.20.1, K.20.3,
and protective devices)) L.20, L.21
1.4.2.1 5, 19.1, 19.9, K/L.5
(Special requirements for fixed
guards)
1.4.2.3 5, 19.1, K/L.5
(Special requi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.