Dimensions of low-profile cores made of magnetic oxides

Specifies the dimensions that are of importance for mechanical interchangeability of a preferred range of low-profile cores made of magnetic oxides and the effective parameter values to be used in calculations involving these cores. Gives the general considerations upon which the design of this range of cores is based.

Maße von Kernen niedriger Bauhöhe aus magnetischen Oxiden

Dimensions des noyaux faible hauteur en oxydes magnétiques

Spécifie les dimensions qui jouent un rôle important pour l'interchangeabilité mécanique d'une gamme préférentielle de noyaux faible hauteur en oxydes magnétiques et les valeurs des paramètres effectifs à utiliser pour les calculs impliquant ces noyaux. Donne les considérations générales sur lesquelles repose la conception de cette gamme de noyaux.

Dimensions of low-profile cores made of magnetic oxides (IEC 61860:2000)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
16-Dec-2009
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Dec-2009
Due Date
06-Jan-2010
Completion Date
17-Dec-2009

Relations

Buy Standard

Standard
EN 61860:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61860:2002
01-september-2002
Dimensions of low-profile cores made of magnetic oxides (IEC 61860:2000)
Dimensions of low-profile cores made of magnetic oxides
Maße von Kernen niedriger Bauhöhe aus magnetischen Oxiden
Dimensions des noyaux faible hauteur en oxydes magnétiques
Ta slovenski standard je istoveten z: EN 61860:2000
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 61860:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61860:2002

---------------------- Page: 2 ----------------------

SIST EN 61860:2002
EUROPEAN STANDARD EN 61860
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2000

ICS 29.100.10


English version


Dimensions of low-profile cores made of magnetic oxides
(IEC 61860:2000)


Dimensions des noyaux faible hauteur en Maße von Kernen niedriger Bauhöhe aus
oxydes magnétiques magnetischen Oxiden
(CEI 61860:2000) (IEC 61860:2000)






This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

  Ref. No. EN 61860:2000 E

---------------------- Page: 3 ----------------------

SIST EN 61860:2002
Page 2
EN 61860:2000
Foreword
The text of document 51/564/FDIS, future edition 1 of IEC 61860, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61860 on 2000-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.