Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

This European Standard is applicable to filters as part of cabs of categories 2, 3 and 4 of agricultural and forestry tractors and self-propelled sprayers as specified in EN 15695-1 in order to limit the exposure of the operator (driver) to hazardous substances, in agricultural and forestry operations. It specifies requirements, test procedures and the information to be provided by the filter manufacturer.
This standard does not cover:
   the exposure linked to fumigants;
   the category of cab and performance level to be used for any particular application;
   the actual cab performance in the field applications;
   field durability of filters or filtration systems.
This document is not applicable to filters which are manufactured before the date of its publication as EN.

Landwirtschaftliche Traktoren und selbstfahrende Pflanzenschutzgeräte - Schutz vor gefährlichen Stoffen - Teil 2: Filter, Anforderungen und Prüfverfahren

Diese Europäische Norm gilt für Filter, die in Kabinen der Kategorien 2, 3 und 4 von land- und forstwirtschaftlichen Traktoren und selbstfahrenden Pflanzenschutzgeräten, wie in EN 15695-1 angegeben, eingebaut werden, um die Belastung der Bedienungsperson (Fahrer) durch gefährliche Substanzen bei land- und forstwirtschaftlichen Arbeiten zu begrenzen. Sie legt Anforderungen und Prüfverfahren sowie die Information, die von dem Hersteller des Filters zur Verfügung zu stellen ist, fest.
Dieses Dokument behandelt nicht:
—   die Belastung durch Begasungsmittel;
—   die Kabinen-Kategorie und das Schutzniveau, die bzw. das bei einer speziellen Anwen¬dung zu verwenden ist;
—   das tatsächliche Leistungsvermögen der Kabine beim Feldeinsatz;
—   Haltbarkeit von Filtern und Filtersystemen unter praktischen Bedingungen.
Dieses Dokument gilt nicht für Filter, die vor der Veröffentlichung als EN hergestellt wurden.

Tracteurs agricoles et pulvérisateurs automoteurs - Protection de l'opérateur (conducteur) contre les substances dangereuses - Partie 2 : Filtres, exigences et méthodes d'essai

La présente Norme européenne s’applique aux filtres à installer dans les cabines de catégories 2, 3 et 4 de tracteurs agricoles et forestiers et de pulvérisateurs automoteurs, spécifiées dans l’EN 15695 1, afin de limiter l'exposition de l'opérateur (conducteur) aux substances dangereuses lors des opérations agricoles et de sylviculture. Elle spécifie les exigences, les méthodes d'essai et les informations à fournir par le fabricant du filtre.
La présente norme ne traite pas :
-   de l'exposition liée aux fumigants ;
-   de la catégorie de cabine et du niveau de performance à utiliser pour une application particulière donnée ;
-   des performances réelles de la cabine dans le cas d'applications au champ ;
-   de la durabilité des filtres ou des systèmes de filtration.
Le présent document ne s'applique pas aux filtres fabriqués avant sa date de publication en tant qu'EN.

Kmetijski traktorji in stroji z lastnim pogonom za zaščito rastlin - Zaščita upravljalca (voznika) pred nevarnimi snovmi - 2. del: Filtri, zahteve in postopki preskušanja

Ta evropski standard se uporablja za filtre 2., 3, in 4. kategorije, ki so del kabin kmetijskih in gozdarskih traktorjev ter strojev z lastnim pogonom za zaščito rastlin, kot je določeno v standardu EN 15695-1, za omejitev izpostavljenosti upravljavca (voznika) nevarnim snovem v kabini pri kmetijskih in gozdarskih opravilih. Določa zahteve, preskusne postopke in informacije, ki jih mora zagotoviti proizvajalec filtra.
Ta standard ne zajema:
izpostavljenosti, povezani s fumiganti;
kategorije kabin in ravni zmogljivosti za katero koli določeno uporabo;
dejanske zmogljivosti kabine na terenu;
trajnost filtrov ali filtrskih sistemov na terenu.
Ta dokument se ne uporablja za filtre, ki so bili izdelani, preden je bil dokument objavljen kot standard EN.

General Information

Status
Published
Public Enquiry End Date
01-Feb-2016
Publication Date
21-Sep-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Sep-2017
Due Date
19-Nov-2017
Completion Date
22-Sep-2017

Relations

Buy Standard

Standard
EN 15695-2:2017
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMDLandwirtschaftliche Traktoren und selbstfahrende Pflanzenschutzgeräte - Schutz vor gefährlichen Stoffen - Teil 2: Filter, Anforderungen und PrüfverfahrenTracteurs agricoles et pulvérisateurs automoteurs - Protection de l'opérateur (conducteur) contre les substances dangereuses - Partie 2 : Filtres, exigences et méthodes d'essaiAgricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures65.060.10Kmetijski traktorji in prikoliceAgricultural tractors and trailed vehiclesICS:Ta slovenski standard je istoveten z:EN 15695-2:2017SIST EN 15695-2:2017en01-november-2017SIST EN 15695-2:2017SLOVENSKI
STANDARDSIST EN 15695-2:2010/AC:2012SIST EN 15695-2:20101DGRPHãþD



SIST EN 15695-2:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15695-2
September
t r s y ICS
x wä r x rä s r Supersedes EN
s w x { wæ tã t r r {English Version
Agricultural tractors and selfæpropelled sprayers æ substances æ Part
tã Filtersá requirements and test procedures Tracteurs agricoles et pulvérisateurs automoteurs æ substances dangereuses æ Partie
t ã Filtresá exigences et méthodes d 5essai
Landwirtschaftliche Traktoren und selbstfahrende Pflanzenschutzgeräte æ Schutz der Bedienungsperson Anforderungen und Prüfverfahren This European Standard was approved by CEN on
u July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w x { wæ tã t r s y ESIST EN 15695-2:2017



EN 15695-2:2017 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Requirements and test procedures . 5 3.1 Dust filter . 5 3.1.1 Requirements . 5 3.1.2 Test procedure . 6 3.2 Aerosol filter . 6 3.2.1 Requirements . 6 3.2.2 Test procedure . 6 3.3 Vapour filter . 6 3.3.1 Pre-test vibration conditioning . 6 3.3.2 Requirements . 7 3.3.3 Test procedure . 7 4 Information for use . 7 4.1 Information . 7 4.2 Marking . 7 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of Directive 2006/42/EC, Machinery, aimed to be covered . 8 Bibliography . 9
SIST EN 15695-2:2017



EN 15695-2:2017 (E) 3 European foreword This document (EN 15695-2:2017) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15695-2:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The EN 15695 series, Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances, consists of the following parts: — Part 1: Cab classification, requirements and test procedures; — Part 2: Filters, requirements and test procedures. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15695-2:2017



EN 15695-2:2017 (E) 4 Introduction This document is a type C standard as stated in EN ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. When operating self-propelled sprayers and tractors the operator can be exposed to hazardous substances such as dust, aerosols or vapours (for example during t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.