SIST EN 122340:2005

Sectional Specification: Radio frequency coaxial connectors - Series MMCX

IEC/SC 46D projects transferred into IEC/SC 46F

Rahmenspezifikation: Hochfrequenz-Steckverbinder - Serie MMCX

Spécification intermédiaire: Connecteurs pour fréquence radioélectrique - Série MMCX

Področna specifikacija - Radiofrekvenčni koaksialni konektorji - Serija MMCX

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2005
• Withdrawal Date: 19-Aug-2018
• ICS: 33.120.30 - RF connectors
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Aug-2018
• Due Date: 01-Sep-2018
• Completion Date: 20-Aug-2018
• Ref Project: EN 122340:2002 - Sectional Specification: Radio frequency coaxial connectors - Series MMCX

Relations

• Revised: SIST EN 61169-52:2016 - Radio-frequency connectors -- Part 52: Sectional specification for series MMCX RF coaxial connectors (IEC 61169-52:2015)
• Effective Date: 30-Jun-2015

Standards Content (Sample)

SIST EN 122340:2005SLOVENSKIfebruar 2005
STANDARDPodročna specifikacija - Radiofrekvenčni koaksialni konektorji - Serija MMCXSectional specification: Radio frequency coaxial connectors - Series MMCX©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 122340:2005(en)ICS33.120.30







EUROPEAN STANDARDEN 122340NORME EUROPÉENNEEUROPÄISCHE NORMMarch 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 122340:2002 EICS 33.120.30English versionSectional Specification:Radio frequency coaxial connectors -Series MMCXSpécification intermédiaire:Connecteurs pour fréquenceradioélectrique -Série MMCXRahmenspezifikation:Hochfrequenz-Steckverbinder -Serie MMCXThis European Standard was approved by CENELEC on 2001-11-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.



EN 122340:2002- 2 -ForewordThis European Standard was prepared by former Technical Committee CENELEC TC 46D, RFconnectors (disbanded by 105 BT in October 2000).The text of the draft was submitted to the Unique Acceptance Procedure and was approved byCENELEC as EN 122340 on 2001-11-01.The following dates were fixed:-latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2002-11-01-latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2004-11-01__________



- 3 -EN 122340:2002ContentsPageCECC-specification system for HF connectors.
41Scope.
62Mating face and gauge information.
62.1Dimensions - General purpose connectors.
62.2Gauges for general purpose connectors.
72.3Dimensions - Standard test connectors (Grade 0).
103Properties.
113.1Ratings and characteristics.
114Quality assessment procedures.
144.1Test schedules and inspection requirements.
15



EN 122340:2002- 4 -CECC-SPECIFICATION SYSTEMFOR HF CONNECTORSCECC 22 000GENERIC SPECIFICATION• Scope• General• Quality assessment procedures• Test and measurement proceduresEN 122340SECTIONAL SPECIFICATION(Connector series MMCX)• Drawings - mating face drawings for standard test connectors, general-purpose connectors and applicabe gauges• Standard conditions for testing• Qualification approval tests• Lot-by-lot test• Periodic testsEN 122210SECTIONALSPECIFICATION(SERIES N)EN 122230SECTIONALSPECIFICATION(SERIES 1,0 / 2,3)EN 122341BLANK DETAIL SPECIFICATION• Pro forma for preparation of detailspecificationsCECC 22 211BLANK DETAILSPECIFICATIONCECC 22 231BLANK DETAILSPECIFICATIONEN 122341-802DETAIL SPECIFICATION(Connector STYLE .)• Description of style• Details of variants, appropriate cables etc.• Outline drawing(s)• Quality assessment procedures• ratings (including limiting conditions of use)and characteristics• Test requirementsCECC 22 211-801DETAIL SPECIFICATIONCECC 22 231-801DETAIL SPECIFICATIONEN122341-803DETAIL SPECIFICATIONEN 122341-801DETAIL SPECIFICATIONNOTE
A detail specification is a ‘completed’ blank detail specification.



- 5 -EN 122340:2002Document numbering for RF connector specifications is in the process of conversion to conformwith CENELEC PNE Rules, affecting generic, sectional and blank detail specifications but notCECC detail specifications.Detail specifications (DS) shall be prepared using general blank detail specifications (BDS)EN 122001 (for military connectors), EN 122002 (for commercial connectors).When completed, the detail specification (DS) applicable to this sectional specification (SS) shallbe renumbered in accordance with 4.2 of CECC 00 700 (Section IV) Issue 1, as if a 'dedicatedBDS’ EN 122341 had been used.



EN 122340:2002- 6 -1ScopeThis sectional specification (SS) provides information and rules for the preparation of detailspecifications (DS) for miniature snap-on interfaces for use with both flexible and semi-rigidcoaxial cables (Series MMCX). The connectors are usable to a frequency of at least 6 GHz.It prescribes mating-face dimensions for general purpose connectors, dimensional details forstandard test connectors, Grade 0, together with gauging information and the mandatory tests,selected from CECC 22 000, applicable to all DSs relating to Series MMCX connectors.This specification indicates the recommended performance characteristics to be considered whenwriting a DS, and covers test schedules and inspection requirements for Assessment Level H.2Mating face and gauge information2.1Dimensions - General purpose connectorsMetric dimensions are original dimensions. All undimensioned pictorial configurations are forreference purposes only.2.1.1PlugFigure 1 - Plug with male centre contactTable 1mmRef.min.max.NoteA---2,40DiameterB2,70---C0,000,25D2,322,35Diameter
1E---3,15F1,581,62Diameter
2G1,45---H0,380,42DiameterI---0,20Diameter



- 7 -EN 122340:2002NOTE 1Diameter of centre conductor and of uniform transmission line to give required characteristic impedanceof 50 Ω.NOTE 2Diameter chosen to meet mechanical and electrical requirements and to compensate for electrical effect ofslots.NOTE 3Angular tolerance ± 2 °.2.1.2SocketFigure 2 - Socket with female centre contactTable 2mmRef.min.max.NoteA2,41---DiameterB2,60---C0,901,20D2,322,35Diameter
1E1,40---F3,003,04DiameterG2,882,90DiameterH1,571,63I2,302,34K---0,23NOTE 1Diameter of centre conductor and of uniform section of transmission line to give required characteristicimpedance of 50 Ω.NOTE 2Bore diameter of centre conductor and closure to meet electrical and mechanical requirements.NOTE 3Angular tolerance ± 2°.2.2Gauges for general purpose connectorsMetric dimensions are original dimensions. All undimensioned pictorial configurations are forreference purposes only.



EN 122340:2002- 8 -2.2.1 Gauge for female centre contactFigure 3 - Gauge pin for centre contact of socket connector(for dimension 'a' see Table 3)Table 3Gauge A (for sizing purposes)Gauge B (for measurement of gaugeretention force for inner conductorMass (weight) of gauge: 28 g ± 1 gRef.mmmmmin.max.min.max.a ∅0,4300,4360,3770,382Material:Steel, polishedsurface roughness Ra = 0,4 µm max.Test procedure (see 4.5.1 of CECC 22 000)Gauge A shall be inserted three times into a female centre contact. This is a sizing operation.After this, Gauge B shall be inserted into the female centre contact. The contact shall support themass of the gauge in a vertical downward attitude.Additional testFollowing the sizing operation, and if prescribed in the DS, the force necessary to insert Gauge Afully into the female centre contact shall be measured. When this test is required, the maximumpermitted insertion force shall then be specified and shall not exceed 5 N.NOTEGauge A is used for qualification approval tests only.Radius



- 9 -EN 122340:20022.2.2Gauge for outer contact of plugFigure 4 - Outer contact retention and se
...