Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

This European Standard applies to emission and immunity aspects of EMC for electrical and electronic
apparatus and systems intended for use in railway fixed installations for power supply. This includes
the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items
such as switching stations, power autotransformers, booster transformers, substation power
switchgear and power switchgear to other longitudinal and local supplies.
Filters operating at railway system voltage (for example, for harmonic suppression or power factor
correction) are not included in this standard since each site has special requirements. Filters would
normally have separate enclosures with separate rules for access. If electromagnetic limits are
required, these will appear in the specification for the equipment.
If a port is intended to transmit or receive for the purpose of radio communication (intentional radiators,
e.g. transponder systems), then the radiated emission requirement in this standard are not intended to
be applicable to the intentional transmission from a radio-transmitter as defined by the ITU.
The frequency range considered is from DC to 400 GHz. No measurements need to be performed at
frequencies where no requirement is specified.
Emission and immunity limits are given for items of apparatus which are situated:
a) within the boundary of a substation which delivers electric power to a railway;
b) beside the track for the purpose of controlling or regulating the railway power supply, including
power factor correction;
c) along the track for the purpose of supplying electrical power to the railway other than by means of
the conductors used for contact current collection, and associated return conductors. Included are
high voltage feeder systems within the boundary of the railway which supply substations at which
the voltage is reduced to the railway system voltage;
d) beside the track for controlling or regulating electric power supplies to ancillary railway uses. This
category includes power supplies to marshalling yards, maintenance depots and stations;
e) various other non-traction power supplies from railway sources which are shared with railway
traction.
The immunity levels given in this standard apply for:
- vital equipment such as protection devices;
- equipment having connections to the traction power conductors;
- apparatus inside the 3 m zone;
- ports of apparatus inside the 10 m zone with connection inside the 3 m zone;
- ports of apparatus inside the 10 m zone with cable length > 30 m.
Apparatus and systems which are in an environment which can be described as residential,
commercial or light industry, even when placed within the physical boundary of the railway substation,
shall comply with EN 61000-6-1:2007 for immunity and EN 61000-6-3:2007 for emission requirements.
Excluded from the immunity requirements of this standard is power supply apparatus which is
intrinsically immune to the tests defined in Tables 1 to 6.
NOTE An example is an 18 MVA 230 kV to 25 kV power supply transformer.
These specific provisions are to be used in conjunction with the general provisions in EN 50121-1.
This part of the standard covers requirements for both apparatus and fixed installations. The sections
for fixed installations are not relevant for CE marking.

Bahnanwendungen - Elektromagnetische Verträglichkeit - Teil 5: Störaussendungen und Störfestigkeit von ortsfesten Anlagen und Einrichtungen der Bahnenergieversorgung

Applications ferroviaires - Compatibilité électromagnétique - Partie 5 : Emission et immunité des installations fixes d'alimentation de puissance et des équipements associés

Železniške naprave - Elektromagnetna združljivost - 5. del: Sevanje in odpornost stabilnih močnostnih napajalnih inštalacij in naprav

General Information

Status
Not Published
Public Enquiry End Date
29-Jul-2021
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
19-Mar-2024
Due Date
24-Mar-2024
Completion Date
19-Mar-2024

Relations

Buy Standard

Draft
prEN 50121-5:2021
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50121-5:2021
01-julij-2021
Železniške naprave - Elektromagnetna združljivost - 5. del: Sevanje in odpornost
stabilnih močnostnih napajalnih inštalacij in naprav
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of
fixed power supply installations and apparatus
Bahnanwendungen - Elektromagnetische Verträglichkeit - Teil 5: Störaussendungen und
Störfestigkeit von ortsfesten Anlagen und Einrichtungen der Bahnenergieversorgung
Applications ferroviaires - Compatibilité électromagnétique - Partie 5 : Emission et
immunité des installations fixes d'alimentation de puissance et des équipements
associés
Ta slovenski standard je istoveten z: prEN 50121-5:2021
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN 50121-5:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50121-5:2021

---------------------- Page: 2 ----------------------
oSIST prEN 50121-5:2021

EUROPEAN STANDARD DRAFT
prEN 50121-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2021
ICS  Will supersede EN 50121-5:2017 and all of its
amendments and corrigenda (if any)
English Version
Railway applications - Electromagnetic compatibility - Part 5:
Emission and immunity of fixed power supply installations and
apparatus
Applications ferroviaires - Compatibilité électromagnétique - Bahnanwendungen - Elektromagnetische Verträglichkeit -
Partie 5 : Emission et immunité des installations fixes Teil 5: Störaussendungen und Störfestigkeit von ortsfesten
d'alimentation de puissance et des équipements associés Anlagen und Einrichtungen der Bahnenergieversorgung
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2021-10-15.

It has been drawn up by CLC/TC 9X.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 73239 Ref. No. prEN 50121-5:2021 E

---------------------- Page: 3 ----------------------
oSIST prEN 50121-5:2021
prEN 50121-5:2021 (E)
Contents
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Abbreviations . 7
4 Performance criteria .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.