iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50496:2018

(Main)

Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site

Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site

This standard provides methods for assessing compliance with the requirements of the Directive 2013/35/EU] at a site operating one or more broadcast transmitters.
This standard covers the frequency range up to 40 GHz.
NOTE   The Council and European Parliament Directive 2013/35/EU will be transposed into national legislation in all the EU member countries. Users of this standard shall consult the national legislation related to this transposition in order to identify the national regulations and requirements. These national regulations and requirements can have additional requirements that are not covered by this standard.

Ermittlung der Exposition von Arbeitnehmern gegenüber elektromagnetischen Feldern und Bewertung des Risikos am Standort eines Rundfunksenders

Détermination de l'exposition des travailleurs aux champs électromagnétiques et évaluation des risques sur un site de radiodiffusion

La présente norme fournit des méthodes pour évaluer la conformité d’un site exploitant un ou plusieurs émetteurs de radiodiffusion aux exigences de la Directive 2013/35/UE.
La présente norme couvre la plage de fréquences jusqu’à 40 GHz.
NOTE   La Directive 2013/35/UE du Parlement européen et du Conseil de l’Union européenne sera transposée dans les législations nationales de tous les pays membres de l’UE. Les utilisateurs de la présente norme doivent consulter la législation nationale liée à cette transposition afin d’identifier les réglementations et exigences nationales. Ces réglementations et exigences nationales peuvent avoir des exigences supplémentaires non couvertes par la présente norme.

Ugotavljanje izpostavljenosti delavca elektromagnetnemu sevanju in ocena tveganja na mestu oddajnika

Ta standard podaja metode za ocenjevanje skladnosti z zahtevami Direktive 2013/35/EU na mestu, na katerem deluje en ali več oddajnikov. Ta standard obravnava frekvenčno območje do vključno 40 GHz. OPOMBA: Direktiva 2013/35/EU Evropskega parlamenta in Sveta bo prenesena v nacionalno zakonodajo vseh držav članic EU. Uporabniki tega standarda morajo upoštevati nacionalno zakonodajo, povezano s tem prenosom, ter se seznaniti z nacionalni predpisi in zahtevami. Ti nacionalni predpisi in zahteve lahko vključujejo dodatne zahteve, ki niso obravnavane v tem standardu.

General Information

Status
Published
Public Enquiry End Date
09-Feb-2017
Publication Date
20-Aug-2018
ICS
17.240 - Radiation measurements
Technical Committee
INIR - Electromagnetic fields in human enviornment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Aug-2018
Due Date
13-Oct-2018
Completion Date
21-Aug-2018
Directive
2004/40/EC - Directive 2004/40/EC of the European Parliament and of the Council of 29 April 2004 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (18th individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC)
2013/35/EU - Directive 2013/35/EU of the European Parliament and of the Council of 26 June 2013 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (20th individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) and repealing Directive 2004/40/EC
Mandate
M/351 - Standardisation mandate addressed to CEN, CENELEC and ETSI to develop harmonized standards for the assessment, measurement and calculation of worker's exposure to static magnetic and varying electric, magnetic and electromagnetic fields with frequencies from 0Hz to 300 GHz
Ref Project
EN 50496:2018 - Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site

Relations

Replaces
SIST EN 50496:2009 - Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site
Effective Date
07-Jun-2022
Replaces
SIST EN 50496:2009 - Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site
Effective Date
20-Mar-2018
Revised
SIST EN 50496:2009 - Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site
Effective Date
20-Aug-2014

Buy Standard

EN 50496:2018 - BARVEEN 50496:2018 - BARVE
PreviousNext
Standard
EN 50496:2018 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50496:2018
01-oktober-2018
1DGRPHãþD
SIST EN 50496:2009
Ugotavljanje izpostavljenosti delavca elektromagnetnemu sevanju in ocena
tveganja na mestu oddajnika
Determination of workers' exposure to electromagnetic fields and assessment of risk at a
broadcast site
Ermittlung der Exposition von Arbeitnehmern gegenüber elektromagnetischen Feldern
und Bewertung des Risikos am Standort eines Rundfunksenders
Détermination de l'exposition des travailleurs aux champs électromagnétiques et
évaluation des risques sur un site de radiodiffusion
Ta slovenski standard je istoveten z: EN 50496:2018
ICS:
17.240 Merjenje sevanja Radiation measurements
SIST EN 50496:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50496:2018

---------------------- Page: 2 ----------------------

SIST EN 50496:2018

EUROPEAN STANDARD EN 50496

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 17.240 Supersedes EN 50496:2008
English Version
Determination of workers' exposure to electromagnetic fields and
assessment of risk at a broadcast site
Détermination de l'exposition des travailleurs aux champs Ermittlung der Exposition von Arbeitnehmern gegenüber
électromagnétiques et évaluation des risques sur un site de elektromagnetischen Feldern und Bewertung des Risikos
radiodiffusion am Standort eines Rundfunksenders
This European Standard was approved by CENELEC on 2017-12-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50496:2018 E

---------------------- Page: 3 ----------------------

SIST EN 50496:2018
EN 50496:2018 (E)
Contents Page

European foreword . 3
1 . Scope . 4
2 . Normative references. 4
3 . Terms and definitions . 5
4 . Assessment methods . 7
5 . Collection of technical data . 8
6 . Determination of exposure levels by calculation or measurement . 9
7 . Zoning of exposure work place .12
8 . Checking of operating procedures in the different exposure work places.16
9 . Information and training .19
10 . Assessment report .20
Annex A (normative) Summation formulae .21
A.1 . General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62232:2023(Main)
Determination of RF field strength, power density and SAR in the vicinity of base stations for the purpose of evaluating human exposure
EN IEC 62232:2022

This document provides methods for the determination of RF field strength, power density and
specific absorption rate (SAR) in the vicinity of base stations (BS) for the purpose of evaluating
human exposure.
This document:
a) considers intentionally radiating BS which transmit on one or more antennas using one or
more frequencies in the range 110 MHz to 300 GHz;
b) considers the impact of ambient sources on RF exposure at least in the 100 kHz to 300 GHz
frequency range;
c) specifies the methods to be used for RF exposure evaluation for compliance assessment
applications, namely:
1) product compliance – determination of compliance boundary information for a BS
product before it is placed on the market;
2) product installation compliance – determination of the total RF exposure levels in
accessible areas from a BS product and other relevant sources before the product is put
into operation;
3) in-situ RF exposure assessment – measurement of in-situ RF exposure levels in the
vicinity of a BS installation after the product has been taken into operation;
d) specifies how to perform RF exposure assessment based on the actual maximum approach;
e) describes several RF field strength, power density, and SAR measurement and computation
methodologies with guidance on their applicability to address both the in-situ evaluation of
installed BS and laboratory-based evaluations;
f) describes how surveyors establish their specific evaluation procedures appropriate for their
evaluation purpose;
g) provides guidance on how to report, interpret and compare results from different evaluation
methodologies and, where the evaluation purpose requires it, determine a justified decision
against a limit value;
h) provides methods for the RF exposure assessment of BS using time-varying beam-steering
technologies such as new radio (NR) BS using massive multiple input multiple output
(MIMO).
NOTE 1 Practical implementation case studies are provided as examples in the companion Technical Report
IEC TR 62669:2019 [5].
NOTE 2 Although the current BS product types have been specified to operate up to 200 GHz (see, for example,
[6] and [7]), the upper frequency of 300 GHz is consistent with applicable exposure limits.
NOTE 3 The lower frequency considered for ambient sources, 100 kHz, is derived from ICNIRP-1998 [2] and
ICNIRP-2020 [1]. However, some applicable exposure guidelines require ambient fields to be evaluated as low as
3 kHz, e.g. Safety Code 6 [4] and IEEE Std C95.1-2019 [3].
NOTE 4 Specification of appropriate RF exposure mitigation measures such as signage, access control, and training
are beyond the scope of this document. It is possible to refer to the applicable regulations or recommended practices
on these topics.
NOTE 5 While this document is based on the current international consensus about the best engineering practice
for assessing the compliance of RF exposure with the applicable exposure limits, it is possible that national regulatory
agencies specify different requirements. The entity conducting an RF exposure assessment needs to be aware of
the applicable regulations.

  • Standard
    346 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50527-2-3:2022(Main)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-3: Specific assessment for workers with implantable neurostimulators
EN 50527-2-3:2021

This European Standard provides the procedure for the specific assessment required in Annex A of EN 50527 1:2015 for workers with implanted neurostimulators (e.g. spinal cord, deep-brain, retinal, bladder). It offers different approaches for doing the risk assessment. The most suitable one shall be used. If the worker has other Active Implantable Medical Devices (AIMDs) implanted additionally, they have to be assessed separately.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50554:2021(Main)
Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields
EN 50554:2021

This document specifies the method for assessing overall exposure from all fixed radio frequency sources at a broadcast site. This assessment can be applied at any time but is carried out when the exposure situation changes in or around the aforementioned site.
This document plays an essential role in the coordination of different stakeholders, with respect to ensuring EMF exposure compliance in and around a broadcast site especially for equipment installed within the site.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50499:2021(Main)
Procedure for the assessment of the exposure of workers to electromagnetic fields
EN 50499:2019

TThe scope of this European Standard is to provide a general procedure for the assessment of workers’ exposure to electric, magnetic and electromagnetic fields in a workplace in order to determine compliance with exposure limit values and/or action levels as stated in European Directive 2013/35/EU
The purpose of this European Standard is to
-   specify how to perform an initial assessment of the levels of workers' exposure to electromagnetic fields (EMF), if necessary including specific exposure assessment of such levels by measurements and/or calculations,
-   determine whether it is necessary to carry out a detailed risk assessment of EMF exposure.
This European Standard can be used by employers for the risk assessment and, where required, measurement and/or calculation of the exposure of workers. Based on specific workplace and other standards, it can be determined whether preventive measures/actions have to be taken to comply with the provisions of the Directive.
The frequencies covered are from 0 Hz to 300 GHz.
NOTE 1   This European Standard is written under Mandate M/351 and relates to the exposure limits as specified in the Directive 2013/35/EU. It is intended to protect workers from risks to their health and safety arising or likely to arise from exposure to electromagnetic fields (0 Hz to 300 GHz) during their work. However, this and other Directives can include additional measures for the protection of specific groups of workers and/or specific work places for which the employer is required to investigate other protective measures as a part of the overall risk assessment. See Annex A.
NOTE 2    Directive 2013/35/EU has been transposed into national legislation in all the EU member countries. It is intended that users of this standard consult the national legislation related to this transposition in order to identify the national regulations and requirements. These national regulations and requirements can have additional requirements that are not covered by this standard.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62232:2019(Main)
Determination of rf field strength, power density and sar in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
EN 62232:2017

This document provides methods for the determination of radio-frequency (RF) field strength
and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS)
for the purpose of evaluating human exposure.
This document:
a) considers intentionally radiating RBS which transmit on one or more antennas using one
or more frequencies in the range 110 MHz to 100 GHz;
b) considers the impact of ambient sources on RF exposure at least in the 100 kHz to
300 GHz frequency range;
c) specifies the methods to be used for RF exposure evaluation for compliance assessment
applications, namely:
1) product compliance – determination of compliance boundary information for an RBS
product before it is placed on the market;
2) product installation compliance – determination of the total RF exposure levels in
accessible areas from an RBS product and other relevant sources before the product
is put into service;
3) in-situ RF exposure assessment – measurement of in-situ RF exposure levels in the
vicinity of an RBS installation after the product has been taken into operation;
d) describes several RF field strength and SAR measurement and computation methodologies
with guidance on their applicability to address both the in-situ evaluation of installed RBS
and laboratory-based evaluations;
e) describes how surveyors, with a sufficient level of expertise, establish their specific
evaluation procedures appropriate for their evaluation purpose;
f) provides guidance on how to report, interpret and compare results from different
evaluation methodologies and, where the evaluation purpose requires it, determine a
justified decision against a limit value;
g) provides short descriptions of the informative example case studies given in the
companion Technical Report IEC TR 62669 [1].

  • Standard
    243 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50527-2-2:2018(Main)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs)
EN 50527-2-2:2018

This European Standard provides the procedure for the specific assessment required in Annex A of EN 50527 1:2015 for workers with implanted cardioverter defibrillators. It offers different approaches for doing the risk assessment. The most suitable one shall be used. If the worker has other Active Implantable Medical Devices (AIMDs) implanted additionally, they have to be assessed separately.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50527-2-1:2017(Main)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-1: Specific assessment for workers with cardiac pacemakers
EN 50527-2-1:2016

This European Standard provides the procedure for the specific assessment required in EN 50527-1:2016,
Annex A, for workers with implanted pacemakers. It offers different approaches for doing the risk
assessment. The most suitable one will be used. If the worker has other Active Implantable Medical Devices
(AIMDs) implanted additionally, they need to be assessed separately.
The purpose of the specific assessment is to determine the risk for workers with implanted pacemakers
arising from exposure to electromagnetic fields at the workplace. The assessment includes the likelihood of
clinically significant effects and takes account of both transient and long-term exposure within specific areas
of the workplace.
NOTE 1 This standard does not address risks from contact currents.
The techniques described in the different approaches may also be used for the assessment of publicly
accessible areas.
The frequency range to be observed is from 0 Hz to 3 GHz. Above 3 GHz no interference with the
pacemaker occurs when the exposure limits are not exceeded.
NOTE 2 The rationale for limiting the observation range to 3 GHz can be found in ISO 14117:2012, Clause 5.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50527-2-1:2011(Main)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-1: Specific assessment for workers with cardiac pacemakers
EN 50527-2-1:2011

This European Standard provides the procedure for the specific assessment required in Annex A of EN 50527-1:2010 for workers with implanted pacemakers. It offers different approaches for doing the risk assessment. The most suitable one shall be used. If the worker has other AIMDs implanted additionally, they have to be assessed separately. The purpose of the specific assessment is to determine the risk for workers with implanted pacemakers arising from exposure to electromagnetic fields at the workplace. The assessment includes the likelihood of clinically significant effects and takes account of both transient and long-term exposure within specific areas of the workplace.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50554:2011(Main)
Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields
EN 50554:2010

This basic standard specifies the method for assessing overall exposure from all fixed radio frequency sources at a broadcast site. This assessment may be applied at any time but must be carried out when the exposure situation changes in or around this site. It plays an essential role in the coordination of different stakeholders, with respect to ensuring EMF exposure compliance in and around a broadcast site especially for equipment installed within the site.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50527-1:2010(Main)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 1: General
EN 50527-1:2010

The scope of this European Standard is to provide a procedure in order to assess the risk to workers bearing 97 one or more active implantable medical devices from exposure to electric, magnetic and electromagnetic 98 fields at a workplace. It specifies how to perform a general risk assessment and to determine whether it is 99 necessary to carry out a detailed risk assessment.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day