SIST EN 1069-1:2017+A1:2019
(Main)Water slides - Part 1: Safety requirements and test methods
Water slides - Part 1: Safety requirements and test methods
This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.
Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Europäische Norm gilt für alle in Schwimmbädern öffentlicher Nutzung eingebaute Wasserrutschen.
Diese Norm legt allgemeine Anforderungen an alle Typen von Wasserrutschen in öffentlichen Schwimm¬bädern und besondere Anforderungen an bestimmte Wasserrutschen Typen fest. Diese speziellen Sicher-heitsanforderungen sind, so weit wie möglich, auch auf nicht definierte Typen anzuwenden.
Diese Anforderungen betreffen die Sicherheit und die technischen Regeln für Konstruktion, Berechnung und Prüfung von Wasserrutschen.
Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai
La présente Norme européenne est applicable à tous les toboggans aquatiques installés dans les piscines à usage public.
La présente norme spécifie des exigences générales de sécurité pour les toboggans aquatiques dans les piscines à usage public et des exigences spécifiques pour des types définis de toboggans aquatiques. Autant que possible, ces exigences spécifiques de sécurité sont également applicables à des types non définis.
Ces exigences portent sur la sécurité et les règles techniques de conception, de calcul et d'essais.
Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode
Ta evropski standard se uporablja za vse vodne tobogane, ki so nameščeni v javnih plavalnih bazenih. Ta standard določa splošne varnostne zahteve za vodne tobogane v javnih plavalnih bazenih in posebne zahteve za določene vrste vodnih toboganov. Te posebne varnostne zahteve se uporabljajo tudi za nerazvrščene vrste toboganov, če je to le mogoče.
Te zahteve se nanašajo na varnost in tehnična pravila za projektiranje, izračunavanje in preskušanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1069-1:2017+A1:2019
01-september-2019
Nadomešča:
SIST EN 1069-1:2017
Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode
Water slides - Part 1: Safety requirements and test methods
Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren
Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1069-1:2017+A1:2019
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
SIST EN 1069-1:2017+A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1069-1:2017+A1:2019
---------------------- Page: 2 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 97.220.40 Supersedes EN 1069-1:2017
English Version
Water slides - Part 1: Safety requirements and test
methods
Toboggans aquatiques - Partie 1: Exigences de sécurité Wasserrutschen - Teil 1: Sicherheitstechnische
et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 14 May 2017 and includes Amendment 1 approved by CEN on 29 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1069-1:2017+A1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Classification . 11
4.1 Type 1 . 11
4.1.1 Type 1.1 . 11
4.1.2 Type 1.2 . 11
4.2 Type 2 . 11
4.2.1 Type 2.1 . 11
4.2.2 Type 2.2 . 11
4.3 Type 3 . 11
4.4 Type 4 . 12
4.5 Type 5 . 12
4.6 Type 6 . 12
4.6.1 Type 6.1 . 12
4.6.2 Type 6.2 . 12
4.7 Type 7 . 12
4.8 Type 8 . 12
4.9 Type 9 . 12
4.10 Type 10 . 12
5 Materials and construction . 13
5.1 General . 13
5.2 Selection of materials . 13
5.3 Certificates . 13
5.4 Manufacturer and installer. 13
5.5 Durability . 13
5.6 Electrical installations . 13
6 Design . 14
6.1 Design guidelines . 14
6.2 Design analysis . 14
6.2.1 General . 14
6.2.2 Preliminary risk analysis . 14
6.2.3 Construction documents. 15
6.3 Static calculations . 15
6.3.1 General . 15
6.3.2 Actions in the slide area . 16
6.3.3 Actions on Access, Platforms and Railings . 20
6.3.4 Combination of actions and verification . 20
7 Safety requirements for water slides. 21
7.1 General . 21
2
---------------------- Page: 4 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
7.2 Entrapment . 21
7.3 Surfaces . 21
7.3.1 General . 21
7.3.2 Surface of the slide proper . 21
7.4 Corners and edges . 21
7.5 Access to water slides. 21
7.5.1 General . 21
7.5.2 Stairs . 22
7.5.3 Stepladders . 22
7.5.4 Platform . 22
7.5.5 Protection against falling . 22
7.5.6 Slip resistance . 24
7.6 Start section for Types 2 to 10 . 24
7.7 Slide proper . 25
7.7.1 General . 25
7.7.2 Sliding path . 25
7.7.3 Maximum acceleration on a sliding person . 25
7.8 Tubes and covered sections . 25
7.9 Final part. 25
7.9.1 General . 25
7.9.2 Landing device/Landing area. 26
7.10 Splashdown areas . 27
7.11 Accessories . 27
7.11.1 Covers. 27
7.11.2 Ride enhancement devices . 27
7.11.3 Other constituent parts . 28
7.12 Water supply . 29
7.12.1 General . 29
7.12.2 Water flow rate . 30
7.13 Interference between users . 30
7.14 Interference between users and non-users . 30
8 Additional safety requirements for Types 1 to 10 . 31
8.1 Slide proper . 31
8.1.1 Type 1 . 31
8.1.2 Type 2 . 31
8.1.3 Type 3 . 33
8.1.4 Type 4 . 33
8.1.5 Type 5 . 33
8.1.6 Type 6 . 34
8.1.7 Type 7 . 34
8.1.8 Type 8 . 35
8.1.9 Type 9 . 35
8.1.10 Type 10 . 35
8.2 Splashdown area . 35
8.2.1 Acceleration . 35
8.2.2 General and specific pools . 35
8.2.3 Requirements for landing . 36
8.3 Clearance zones . 38
9 Check and test runs . 39
9.1 General . 39
9.2 Technical and physical checks . 39
9.3 Practical test . 39
3
---------------------- Page: 5 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
9.3.1 General . 39
9.3.2 Slide tester . 39
9.3.3 Sliding conditions . 39
9.3.4 Acceleration and speed measurements . 40
9.4 Test report . 40
10 Designation and marking . 41
10.1 Designation. 41
10.2 Marking . 41
Annex A (normative) Splashdown areas . 42
Annex B (normative) Use of stainless steels for water slides . 49
B.1 General . 49
B.2 Indoor swimming pools with disinfection with chlorine . 49
B.2.1 General . 49
B.2.2 Materials without regular cleaning . 49
B.2.3 Materials with regular cleaning . 50
B.2.3.1 General . 50
B.2.3.2 Cleaning concept. 50
B.2.3.3 Execution of the regular cleaning . 50
B.2.3.4 Regular inspection . 50
B.2.4 Outdoor swimming pools with disinfection with chlorine . 50
B.3 Coatings and paintings . 51
Annex C (normative) Design loads, accesses and platforms . 52
C.1 Vertical imposed loads . 52
C.2 Horizontal imposed loads . 52
C.3 Stiffness . 53
C.4 Stairs . 53
Annex D (informative) Acceleration and speed measurements . 55
D.1 Test devices . 55
D.1.1 General . 55
D.1.2 Acceleration measuring device . 55
D.1.3 Maximum speed measuring device . 55
D.2 Description of the acceleration test method . 55
Bibliography . 56
4
---------------------- Page: 6 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
European foreword
This document (EN 1069-1:2017+A1:2019) has been prepared by Technical Committee CEN/TC 136
“Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document includes Amendment 1 approved by CEN on 2019-03-29.
This document supersedes !EN 1069-1:2017".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
EN 1069, Water slides, consists of the following parts:
— Part 1: Safety requirements and test methods
— Part 2: Instructions
!deleted text"
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
5
---------------------- Page: 7 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
Introduction
The market for water slides is extremely wide and specific and still developing. It is impossible to define
an all-embracing safety specification, including dimensions and design requirements as required by a
standard, without limiting the design possibilities and preventing innovative and new but safe products.
This European Standard is intended to establish safety requirements and design guidance rules to serve
anyone involved with water slides, especially designers, manufacturers, operators and users, to ensure
safe and more efficient products. Its basic approach is the consciousness that the sliding action usually
implies for the users a higher risk level than using a pool. For certain aspects of design, manufacturing,
installation, operation and use only specific guidelines, without any technical specification, are given,
which should be taken into consideration and be fulfilled in order to ensure safety for operators and
users.
6
---------------------- Page: 8 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
1 Scope
This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use
and specific requirements for defined types of water slides. These specific safety requirements are also
applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.
2 Normative references
!The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies."
EN 1069-2:2017, Water slides — Part 2: Instructions
EN 1990, Eurocode - Basis of structural design
EN 1991-1-1, Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed
loads for buildings
EN 1991-1-3:2003, Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4, Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 10088-1, Stainless steels - Part 1: List of stainless steels
EN 10088-2, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general purposes
EN 10204:2004, Metallic products - Types of inspection documents
EN 13451-1:2011+A1:2016, Swimming pool equipment - Part 1: General safety requirements and test
methods
EN 13451-2, Swimming pool equipment - Part 2: Additional specific safety requirements and test methods
for ladders, stepladders and handle bends
EN 13451-3, Swimming pool equipment — Part 3: Additional specific safety requirements and test
methods for inlets and outlets and water/air based water leisure features
EN 15288-1:2008+A1:2010, Swimming pools - Part 1: Safety requirements for design
EN 15288-2, Swimming pools - Part 2: Safety requirements for operation
EN 22768-1, General tolerances - Part 1: Tolerances for linear and angular dimensions without individual
tolerance indications (ISO 2768-1)
EN ISO 9606-1, Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1)
7
---------------------- Page: 9 ----------------------
SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs (ISO 13857:2008)
EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
(ISO/IEC 17025)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
!ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electrop
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.