Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)

2020-01-17 JF: Through decision BT C190/2019, the BT approved the removal of the link for this standard with the Machinery Directive.
2019-05-31 JF: Following the discussion at the Nucleus (core group of the CEN-CENELEC sector on machinery safety), it was concluded that this standard should not be listed in the Official Journal of European Union (OJEU) under the Machinery Directive 2006/42/EC because these are guidelines. This had been agreed with the TC. CCMC is preparing the BT document on the withdrawal of the link with the Machinery Directive.
2018-06-13 - in-check TAN : Consultant's assessment is missing.

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/Amd 1:2018)

No scope available

Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des normes de base pour la détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO 11200:2014/Amd 1:2018)

Akustika - Emisija hrupa strojev in naprav - Smernice za uporabo temeljnih standardov za ugotavljanje emisijskih ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih - Dopolnilo A1 (ISO 11200:2014/Amd 1:2018)

General Information

Status
Published
Public Enquiry End Date
04-May-2017
Publication Date
10-Mar-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Feb-2020
Due Date
23-Apr-2020
Completion Date
11-Mar-2020

RELATIONS

Buy Standard

Amendment
SIST EN ISO 11200:2014/A1:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
SIST EN ISO 11200:2014/oprA1:2017
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 11200:2014/A1:2020
01-april-2020
Akustika - Emisija hrupa strojev in naprav - Smernice za uporabo temeljnih
standardov za ugotavljanje emisijskih ravni zvočnega tlaka na mestu delovanja in
na drugih opredeljenih mestih - Dopolnilo A1 (ISO 11200:2014/Amd 1:2018)

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic

standards for the determination of emission sound pressure levels at a work station and

at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung

der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz
und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/Amd 1:2018)

Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des

normes de base pour la détermination des niveaux de pression acoustique d'émission

au poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO
11200:2014/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 11200:2014/A1:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11200:2014/A1:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11200:2014/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 11200:2014/A1:2020
EN ISO 11200:2014/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 17.140.20
English Version
Acoustics - Noise emitted by machinery and equipment -
Guidelines for the use of basic standards for the
determination of emission sound pressure levels at a work
station and at other specified positions - Amendment 1
(ISO 11200:2014/Amd 1:2018)

Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und

équipements - Guide d'utilisation des normes de base Geräten - Leitlinien zur Anwendung der Grundnormen

pour la détermination des niveaux de pression zur Bestimmung von Emissions-Schalldruckpegeln am

acoustique d'émission au poste de travail et en d'autres Arbeitsplatz und an anderen festgelegten Orten -

positions spécifiées - Amendement 1 (ISO Änderung 1 (ISO 11200:2014/Amd 1:2018)
11200:2014/Amd 1:2018)

This amendment A1 modifies the European Standard EN ISO 11200:2014; it was approved by CEN on 20 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11200:2014/A1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11200:2014/A1:2020
EN ISO 11200:2014/A1:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 11200:2014/A1:2020
EN ISO 11200:2014/A1:2020 (E)
European foreword

This document (EN ISO 11200:2014/A1:2020) has been prepared by Technical Committee ISO/TC 43

"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which

is held by DIN.

This Amendment to the European Standard EN ISO 11200:2014 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by August 2020, and

conflicting national standards shall be withdrawn at the latest by August 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 11200:2014/Amd 1:2018 has been approved by CEN as EN ISO 11200:2014/A1:2020

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 11200:2014/A1:2020
---------------------- Page: 6 -------------------
...

SLOVENSKI STANDARD
SIST EN ISO 11200:2014/oprA1:2017
01-maj-2017
$NXVWLND(PLVLMDKUXSDVWURMHYLQQDSUDY6PHUQLFH]DXSRUDERWHPHOMQLK
VWDQGDUGRY]DXJRWDYOMDQMHHPLVLMVNLKUDYQL]YRþQHJDWODNDQDPHVWXGHORYDQMDLQ
QDGUXJLKRSUHGHOMHQLKPHVWLK'RSROQLOR$ ,62'$PG

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic

standards for the determination of emission sound pressure levels at a work station and

at other specified positions - Amendment 1 (ISO 11200:2014/DAmd 1:2017)

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung

der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz
und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/ DAmd 1:2017)

Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des

normes de base pour la détermination des niveaux de pression acoustique d'émission au

poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO 11200:2014/

DAmd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 11200:2014/prA1
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11200:2014/oprA1:2017 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11200:2014/oprA1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11200:2014/oprA1:2017
DRAFT AMENDMENT
ISO 11200:2014/DAM 1
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-01-20 2017-04-13
Acoustics — Noise emitted by machinery and equipment
— Guidelines for the use of basic standards for the
determination of emission sound pressure levels at a work
station and at other specified positions
AMENDMENT 1

Acoustique — Bruit émis par les machines et équipements — Guide d’utilisation des normes de base pour

la détermination des niveaux de pression acoustique d’émission au poste de travail et en d’autres positions

spécifiées
AMENDEMENT 1
ICS: 17.140.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11200:2014/DAM 1:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017
---------------------- Page: 3 ----------------------
SIST EN ISO 11200:2014/oprA1:2017
ISO 11200:2014/DAM 1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11200:2014/oprA1:2017
ISO 11200:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.