Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus dem Schallleistungspegel - Änderung 1 (ISO 11203:1995/Amd 1:2020)

No scope available

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à partir du niveau de puissance acoustique - Amendement 1 (ISO 11203:1995/DAM 1:2018)

Akustika - Emisija hrupa naprav in opreme - Ugotavljanje emisijske ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih z ravni zvočne moči - Dopolnilo A1 (ISO 11203:1995/Amd 1:2020)

General Information

Status
Published
Public Enquiry End Date
04-Sep-2018
Publication Date
09-Aug-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Jul-2020
Due Date
12-Sep-2020
Completion Date
10-Aug-2020

Relations

Buy Standard

Amendment
EN ISO 11203:2009/A1:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 11203:2009/oprA1:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11203:2009/A1:2020
01-september-2020
Akustika - Emisija hrupa naprav in opreme - Ugotavljanje emisijske ravni zvočnega
tlaka na mestu delovanja in na drugih opredeljenih mestih z ravni zvočne moči -
Dopolnilo A1 (ISO 11203:1995/Amd 1:2020)
Acoustics - Noise emitted by machinery and equipment - Determination of emission
sound pressure levels at a work station and at other specified positions from the sound
power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von
Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus
dem Schallleistungspegel - Änderung 1 (ISO 11203:1995/Amd 1:2020)
Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de
pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à
partir du niveau de puissance acoustique - Amendement 1 (ISO 11203:1995/DAM
1:2018)
Ta slovenski standard je istoveten z: EN ISO 11203:2009/A1:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11203:2009/A1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11203:2009/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 11203:2009/A1:2020


EN ISO 11203:2009/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 17.140.20
English Version

Acoustics - Noise emitted by machinery and equipment -
Determination of emission sound pressure levels at a work
station and at other specified positions from the sound
power level - Amendment 1 (ISO 11203:1995/Amd
1:2020)
Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und
équipements - Détermination des niveaux de pression Geräten - Bestimmung von Emissions-
acoustique d'émission au poste de travail et en d'autres Schalldruckpegeln am Arbeitsplatz und an anderen
positions spécifiées à partir du niveau de puissance festgelegten Orten aus dem Schallleistungspegel -
acoustique - Amendement 1 (ISO 11203:1995/Amd Änderung 1 (ISO 11203:1995/Amd 1:2020)
1:2020)
This amendment A1 modifies the European Standard EN ISO 11203:2009; it was approved by CEN on 29 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11203:2009/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11203:2009/A1:2020
EN ISO 11203:2009/A1:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11203:2009/A1:2020
EN ISO 11203:2009/A1:2020 (E)
European foreword
This document (EN ISO 11203:2009/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 11203:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2020,
and conflicting national standards shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11203:1995/Amd 1:2020 has been approved by CEN as EN ISO 11203:2009/A1:2020
without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 11203:2009/A1:2020
EN ISO 11203:2009/A1:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request “M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
The relevant Essential Clause(s)/sub-clause(s) Remarks/Notes
Requirement of Directive of this EN
2006/42/EC (MD)
1.7.4.2 u) 4, 5, 6, 7, 8
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

4

---------------------- Page: 6 ----------------------
SIST EN ISO 11203:2009/A1:2020
INTERNATIONAL ISO
STANDARD 11203
First edition
1995-12-27
AMENDMENT 1
2020-03
Acoustics — Noise emitted by
machinery and equipment —
Determination of emission sound
pressure levels at a work station and
at other specified positions from the
sound power level
AMENDMENT 1
Acoustique — Bruit émis par les machines et équipements —
Détermination des niveaux de pression acoustique d'émission au
poste de travail et en d'autres positions spécifiées à partir du niveau
de puissance acoustique
AMENDEMENT 1
Reference number
ISO 11203:1995/Amd.1:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 11203:2009/A1:2020
ISO 11203:1995/Amd.1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 11203:2009/A1:2020
ISO 11203:1995/Amd.1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 11203:2009/A1:2020

---------------------- Page: 10 ----------------------
SIST EN ISO 11203:2009/A1:2020
ISO 11203:1995/Amd.1:2020(E)
Acoustics — Noise emitted by machinery and equipment —
Determination of emission sound pressure levels at a work
station and at other specified positions from the sound
power level
AMENDMENT 1

1.1
Replace NOTE 1 with the following:
"The contents of this document and related International Standards are summarised in ISO 11200:2014,
Table 1."

1.2
In the last sentence, delete "ISO 2204 and".
Clause 2  Normative references
Replace the references (including the footnotes) with the following.
ISO 3740:2019, Acoustics — Determination of sound power levels of noise sources — Guidelines for the use
of basic standards
ISO 3741:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Precision methods for reverberation test rooms
ISO 3743-1:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1:
Comparison method for a hard-walled test room
ISO
...

SLOVENSKI STANDARD
SIST EN ISO 11203:2009/oprA1:2018
01-september-2018
$NXVWLND(PLVLMDKUXSDQDSUDYLQRSUHPH8JRWDYOMDQMHHPLVLMVNHUDYQL]YRþQHJD
WODNDQDPHVWXGHORYDQMDLQQDGUXJLKRSUHGHOMHQLKPHVWLK]UDYQL]YRþQHPRþL
'RSROQLOR$ ,62'$0
Acoustics - Noise emitted by machinery and equipment - Determination of emission
sound pressure levels at a work station and at other specified positions from the sound
power level - Amendment 1 (ISO 11203:1995/DAM 1:2018)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von
Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus
dem Schallleistungspegel - Änderung 1 (ISO 11203:1995/DAM 1:2018)
Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de
pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à
partir du niveau de puissance acoustique - Amendement 1 (ISO 11203:1995/DAM
1:2018)
Ta slovenski standard je istoveten z: EN ISO 11203:2009/prA1
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11203:2009/oprA1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11203:2009/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 11203:2009/oprA1:2018
DRAFT AMENDMENT
ISO 11203:1995/DAM 1
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2018-04-26 2018-07-19
Acoustics — Noise emitted by machinery and equipment —
Determination of emission sound pressure levels at a work
station and at other specified positions from the sound
power level
AMENDMENT 1
Acoustique — Bruit émis par les machines et équipements — Détermination des niveaux de pression
acoustique d'émission au poste de travail et en d'autres positions spécifiées à partir du niveau de puissance
acoustique
AMENDEMENT 1
ICS: 17.140.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11203:1995/DAM 1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------

SIST EN ISO 11203:2009/oprA1:2018
ISO 11203:1995/DAM 1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------

SIST EN ISO 11203:2009/oprA1:2018
ISO 11203:1995/DAM 1:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST EN ISO 11203:2009/oprA1:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 11203:2009/oprA1:2018
ISO 11203:1995/DAM 1:2018(E)
Acoustics — Noise emitted by machinery and equipment —
Determination of emission sound pressure levels at a work
station and at other specified positions from the sound
power level
AMENDMENT 1
AMENDMENT 1
Page 1, 1.1
Replace NOTE 1 with:
The contents of this and related International Standards are summarised in Table 1 of ISO 11200:2014.
Page 2, Normative references
Replace the references (including the footnotes) with the following:
ISO 3741:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Precision methods for reverberation test rooms
ISO 3743-1:2010, Acoustics — Determination of sound power levels and sound energy levels of noise
sources using sound pressure — Engineering methods for small movable sources in reverberant fields —
Part 1:Comparison method for a hard-walled test room
1)
ISO 3743-2:1994 Acoustics — Determination of sound power levels of noise sources using sound
pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for
special reverberation test rooms
ISO 3744:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Engineering methods for an essentially free field over a reflecting plane
ISO 3745:2012, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Precision methods for anechoic test rooms and hemi-anechoic test rooms
ISO 3745:2012/Amd.1:2017, Acoustics — Determination of sound power levels and sound energy levels of
noise sources using sound pressure — Precision methods for anechoic test rooms and hemi-anechoic test
rooms — AMENDMENT 1
ISO 3746:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
ISO 3747:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and
equipment
ISO 9614-1:1993, Acoustics — Determination of sound power levels of noise sources using sound intensity —
Part 1: Measurement at discrete points
ISO 9614-2:1996, Acoustics — Determination of sound power levels of noise sources using sound intensity —
Part 2: Measurement by scanning

1) Under revision.
© ISO 2018 – All rights reserved 1

---------------------- Page: 7 ----------------------

SIST EN ISO 11203:2009/oprA1:2018
ISO 11203:1995/DAM 1:2018(E)

ISO 9614-3:2002, Acoustics — Determination of sound power levels of noise sources using sound intensity —
Part 3: Precision method for measurement by scanning
ISO 11200:2014, Acoustics — Noise emitted by machinery and equipment -- Guidelines for the use of basic
standards for the determination of emission sound pressure levels at a work station and at other specified
positions
2)
ISO 11200:2014/Amd.1 , Acoustics — Noise emitted by machinery and equipment -- Guidelines for the use
of basic sta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.