SIST EN 12453:2017
(Main)Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
This European Standard specifies requirements and test methods for the safety in use of any type of power operated door, gate and barrier including their components, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors used in retail premises which are mainly provided for the access of persons rather than vehicles or goods
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of doors, gates and barriers, as identified in Annex C.
European Standard does not apply to
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals;
- theatre textile curtains;
- horizontally moving power operated doorsets intended for pedestrian use;
- doors outside the reach of people (such as crane gantry fences);
- railway barriers;
- barriers used solely for vehicles (e.g. barriers on motorway, public car parks).
Also this European Standard does not apply to power operated doors, gates and barriers which are manufactured before the date of publication of this European Standard.
Requirements for specific characteristics (such as fire resistance, blast-resistance, acoustic, escape route function, burglar resistance or thermal insulation, etc.) which certain doors are required to comply with are not specified in this document. If the specifications of a standard on the special characteristics of such doors are in conflict with the requirements of this European Standard, that standard has preference.
Tore - Nutzungssicherheit kraftbetätigter Tore - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen und Prüfverfahren hinsichtlich der Nutzungssicherheit von kraftbetätigten Toren und Schranken fest, die für den Einbau in Zugangsbereichen mit Personenverkehr vorgesehen sind und deren Hauptzweck darin besteht, den sicheren Zugang von Waren und Fahrzeugen, die von Personen geführt oder gesteuert werden, zu industriellen und gewerblichen Anlagen sowie zu Wohn¬anlagen zu ermöglichen.
Diese Europäische Norm behandelt ferner kraftbetätigte und sich vertikal bewegende gewerbliche Tore wie Rolltore und –gitter, die in Einzelhandelseinrichtungen eingesetzt werden und die hauptsächlich dem Schutz von Waren dienen.
Die vorliegende Europäische Norm behandelt alle in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse im Zusammenhang mit kraftbetätigten Toren, die wie vorgesehen oder bei vorhersehbarem Missbrauch verwendet werden.
Alle Phasen des Lebenszyklus der Maschinen einschließlich der Phasen, in denen die Maschinen transportiert, montiert, demontiert, außer Betrieb gesetzt und entsorgt werden, werden in dieser Norm behandelt.
Diese Europäische Norm gilt nicht für:
- Schleusen- und Hafentore;
- Aufzugstüren oder -tore;
- Türen in Fahrzeugen;
- Tresortüren;
- Türen und Tore zum Einsperren von Tieren, es sei denn, sie befinden sich am Rande eines Geländes;
- textile Theatervorhänge;
- sich waagerecht bewegende kraftbetätigte Tore, die vorwiegend für die Nutzung durch Fußgänger vorgesehen sind;
- Türen oder Tore außerhalb der Reichweite von Personen (z. B. Krantore);
- Eisenbahnschranken;
- Abschlüsse, die ausschließlich für die Verwendung durch Fußgänger vorgesehen sind;
- ausschließlich für Fahrzeuge verwendete Schranken auf Autobahnen.
Immer wenn in diesem Dokument der Begriff "Tor" verwendet wird, ist darunter die gesamte Vielfalt von Türen, Toren und Schranken zu verstehen, die im Anwendungsbereich dieser Norm definiert wird.
Diese Europäische Norm gilt nicht für spezifische Anforderungen an Geräusche, die durch kraftbetätigte Türen, Tore und Schranken verursacht werden, die zum Einbau in Bereichen, zu denen Fußgänger Zugang haben, vorgesehen sind und deren Hauptzweck der sichere Zugang von Waren und Fahrzeugen mit Begleitperson oder Fahrer zu industriellen oder gewerblichen Anlagen oder zu Wohnanlagen ist, da die Geräuschemission nicht als signifikante Gefahr betrachtet wird.
ANMERKUNG Die Geräuschemission von kraftbetätigten Toren stellt keine signifikante Gefahr für die Anwender dieser Produkte dar. Es handelt sich dabei um einen Aspekt des Komforts.
Diese Europäische Norm gilt nicht für Maschinen, die vor dem Datum der Veröffentlichung dieser Norm hergestellt wurden.
Portes et portails industriels, commerciaux et résidentiels - Sécurité d’utilisation des portes et portails motorisés - Exigences et méthodes d'essai
Le présent document définit les exigences et les méthodes d’essai relatives à la sécurité d’utilisation de tous les types de portes, portails et barrières motorisés, y compris leurs composants, qui sont destinés à être installés dans des zones accessibles aux personnes, et dont l’utilisation principale prévue est de permettre l’accès en toute sécurité aux locaux industriels, commerciaux ou résidentiels des marchandises et des véhicules accompagnés ou conduits par des personnes.
La présente Norme européenne concerne également les portes commerciales à déplacement vertical utilisées dans les locaux de vente au détail et dont l’utilisation principale prévue est de permettre l’accès des personnes plutôt que des véhicules ou des marchandises.
La présente Norme européenne traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs liés au fonctionnement motorisé des portes, portails et barrières tels qu’identifiés à l’Annexe C.
La présente Norme européenne ne s’applique pas aux :
- portes d’écluses et portes de bassin ;
- portes d’ascenseurs ;
- portes de véhicules ;
- portes blindées ;
- portes principalement destinées au parcage des animaux ;
- rideaux de théâtre en tissu ;
- blocs-portes motorisés à déplacement horizontal destinés à un usage piétonnier ;
- portes situées hors d’atteinte des personnes (telles que barrières équipant les grues à portiques) ;
- barrières de passages à niveau ;
- barrières destinées uniquement aux véhicules (par exemple, barrières d’autoroutes, de parcs de stationnement publics).
La présente Norme européenne ne s’applique pas non plus aux portes, portails et barrières motorisés fabriqués avant sa date de publication.
Les exigences relatives à des caractéristiques spécifiques (telles que propriétés coupe-feu, antidéflagrantes, acoustiques, fonction d’issue de secours, résistance à l’effraction, isolation thermique, etc.), qui doivent être satisfaites par certaines portes, ne sont pas définies dans le présent document. En cas de conflit, les spécifications d’une norme traitant des caractéristiques particulières de ces portes prévalent sur les exigences de la présente Norme européenne.
Vrata v industrijske in javne prostore ter garažna vrata - Varnost pri uporabi pogonskega mehanizma - Zahteve in preskusne metode
Ta evropski standard določa zahteve in preskusne metode za varnost pri uporabi vseh vrst vrat in zapornic s pogonskim mehanizmom, vključno z njihovimi komponentami, ki so namenjene za namestitev v območjih, kjer so na dosegu ljudem, in katerih glavni predvideni namen uporabe je omogočanje varnega dostopa za blago in vozila v spremstvu ali upravljanju oseb v industrijskih, poslovnih ter stanovanjskih objektih.
Ta evropski standard zajema tudi navpično premikajoča se vrata s pogonskim mehanizmom v maloprodajnih prostorih, ki so namenjena predvsem za dostop ljudi, in ne vozil ali blaga.
Ta mednarodni standard opisuje vsa večja tveganja, nevarne razmere in dogodke v zvezi z uporabo vrat in zapornic s pogonskim mehanizmom, kot so opredeljeni v dodatku C.
Ta evropski standard se ne uporablja za:
– vodne zapornice in zapornice v dokih;
– vrata v dvigalih;
– vrata na vozilih;
– oklepna vrata;
– vrata, namenjena predvsem za zadrževanje živali;
– gledališke zavese iz tekstila;
– vodoravno premikajoča se vrata s pogonskim mehanizmom, namenjena predvsem za pešce;
– vrata na območjih izven dosega ljudi (npr. ograje portalnih žerjavov);
– železniške zapornice;
– zapornice, ki se uporabljajo samo za vozila (npr. zapornice na avtocesti in javnih parkiriščih).
Prav tako se ta evropski standard ne uporablja za vrata in zapornice s pogonskim mehanizmom, ki so izdelana pred datumom objave tega evropskega standarda.
Zahteve za posebne značilnosti (kot so požarna odpornost, odpornost na eksplozijo, akustika, uporaba pri izhodu v sili, protivlomna odpornost ali toplotna izolacija itd.), ki jih morajo nekatera vrata izpolnjevati, niso navedena v tem dokumentu. Če so specifikacije drugega standarda glede posameznih značilnosti teh vrat v nasprotju z zahtevami tega evropskega standarda, ima ta standard prednost.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vrata v industrijske in javne prostore ter garažna vrata - Varnost pri uporabi pogonskega mehanizma - Zahteve in preskusne metodeTore - Nutzungssicherheit kraftbetätigter Tore - Anforderungen und PrüfverfahrenPortes et portails industriels, commerciaux et résidentiels - Sécurité d’utilisation des portes et portails motorisés - Exigences et méthodes d'essaiIndustrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods91.090Konstrukcije zunaj stavbExternal structures91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12453:2017SIST EN 12453:2017en,fr,de01-oktober-2017SIST EN 12453:2017SLOVENSKI
STANDARDSIST EN 12453:2001SIST EN 12445:20011DGRPHãþD
SIST EN 12453:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12453
August
t r s y ICS
{ sä r x rä w r Supersedes EN
s t v v wã t r r rá EN
s t v w uã t r r rEnglish Version
Industrialá commercial and garage doors and gates æ Safety in use of power operated doors æ Requirements and test methods Portes et portails industrielsá commerciaux et résidentiels æ Sécurité d 5utilisation des portes et portails motorisés æ Exigences et méthodes d 5essai
Tore æ Nutzungssicherheit kraftbetätigter Tore æ Anforderungen und Prüfverfahren This European Standard was approved by CEN on
s t June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t v w uã t r s y ESIST EN 12453:2017
EN 12453:2017 (E) 2 Contents Page European foreword . 5 Introduction . 6 1 Scope . 7 2 Normative references . 8 3 Terms and definitions . 9 4 List of significant hazards . 11 4.1 General . 11 4.2 Hazards caused by crushing, shearing and drawing-in . 11 4.2.1 General . 11 4.2.2 Hazards caused when person can travel with the door . 12 4.2.3 Hazards caused by impact . 12 4.3 Hazards caused by source of energy and power controls . 12 4.4 Manual operation . 12 4.5 Other hazards . 13 4.5.1 General . 13 4.5.2 Hazards caused by pass doors . 13 4.5.3 Hazards caused by imprisonment . 13 4.5.4 Hazards caused by trapping . 13 4.5.5 Hazards caused by falling or ejected parts or uncontrolled movement . 13 4.5.6 Hazards caused by the locking devices . 13 4.5.7 Hazards caused due to a loss of stability . 13 4.5.8 Hazards caused by glazing material . 13 4.5.9 Hazards caused by modification of settings . 13 5 Safety requirements and/or protective measures . 14 5.1 General . 14 5.1.1 General . 14 5.1.2 Safety Function performed by control system. 14 5.1.3 Minimum level of safeguarding at the main closing edge . 14 5.2 Crushing, shearing and drawing-in . 15 5.2.1 General . 15 5.2.2 Safeguarding against hazards caused when persons can travel with the door . 19 5.2.3 Safeguarding against impact hazard . 20 5.3 Source of energy and power controls . 20 5.3.1 General . 20 5.3.2 Electrical drive units . 20 5.3.3 Hydraulic drive units . 23 5.3.4 Pneumatic drive units . 23 5.3.5 Restart after unintended interruption . 24 5.3.6 Supply disconnection . 24 5.4 Manual operation . 24 5.4.1 General . 24 5.4.2 Manual operation by direct movement of the door leaf . 24 5.4.3 Manual operation directly applied to the drive unit . 24 5.4.4 Balancing failure at manual operation . 25 5.4.5 Human physical strength for manual operation of the door leaf . 25 SIST EN 12453:2017
EN 12453:2017 (E) 3 5.5 Other hazards . 25 5.5.1 Pass doors . 25 5.5.2 Imprisonment . 25 5.5.3 Trapping. 25 5.5.4 Falling or ejected parts or uncontrolled movement . 25 5.5.5 Locking devices . 26 5.5.6 Loss of stability . 26 5.5.7 Glazing material . 26 5.5.8 Modification of setting . 26 6 Verification of the safety requirements and/or protective measures . 26 6.1 General . 26 6.2 Crushing, shearing and drawing-in points . 27 6.2.1 General . 27 6.2.2 Crushing and shearing hazards, caused when persons can travel with the door . 28 6.2.3 Impact hazard . 29 6.3 Source of energy . 29 6.3.1 Electrical drive units . 29 6.3.2 Hydraulic drive units . 29 6.3.3 Pneumatic drive units . 29 6.3.4 Restart after unintended interruption . 29 6.3.5 Supply disconnection . 29 6.4 Manual operation . 30 6.4.1 Manual operation by direct movement of the door leaf . 30 6.4.2 Manual operation directly applied to the drive unit . 30 6.4.3 Balancing failure at manual operation . 30 6.4.4 Human physical strength for manual operation of the door leaf . 30 6.5 Other hazards . 30 6.5.1 Pass doors . 30 6.5.2 Imprisonment . 30 6.5.3 Trapping. 31 6.5.4 Falling or ejected parts or uncontrolled movement . 31 6.5.5 Locking devices . 32 6.5.6 Loss of stability . 32 6.5.7 Glazing material . 32 6.5.8 Modification of settings . 32 7 Information for use . 32 7.1 General . 32 7.2 Marking . 33 Annex A (normative)
Limitation of forces . 34 A.1 Specifications . 34 A.2 Admissible forces . 34 Annex B (informative)
Examples of mechanical protection and safety distances . 36 B.1 Examples of mechanical protection . 36 B.2 Examples of appropriate safety clearances and safety distances . 37 Annex C (normative)
Force measuring method . 39 C.1 General . 39 C.2 Measuring equipment . 39 SIST EN 12453:2017
EN 12453:2017 (E) 4 C.3 Points of measuring . 39 Annex D (normative)
Testing method for presence detection . 49 D.1 General . 49 D.2 Test pieces . 49 D.3 Testing of supplementary device to be used with force limitation . 50 D.4 Testing of presence detection system to be used without force limitation . 53 Annex E (informative)
Safeguarding against dropping by other design features incorporated in the suspension system of vertically moving power operated door leaves . 57 Annex F (informative)
Relationship between Hazards, Requirements and Test clauses . 58 Annex ZA (informative)
Relationship between this European standard and the Essential Requirements of Directive 2006/42/EC aimed to be covered . 60 Bibliography . 61
SIST EN 12453:2017
EN 12453:2017 (E) 5 European foreword This document (EN 12453:2017) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document will supersede EN 12453:2000 and EN 12445:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Compared with EN 12453:2000 and EN 12445:2000, the following changes have been made: a) EN 12453 has been revised to be harmonized under Machinery Directive 2006/42/EC; b) EN 12453 has been merged with EN 12445; as EN 12445:2000 will be withdrawn; c) aligning structure of EN 12453 according to MD templates; d) revision of the list of significant hazards (Clause 4); e) revision of safety and/or protective measures (Clause 5); f) revision of the verification of the safety requirements (Clause 6); g) editorial revision of Annex A (limitation of forces); h) introducing Annex B (Examples of mechanical protection and safety distances); i) introducing Annex C (Force measuring method); j) introducing Annex D (Testing method for presence detection); k) introducing Annex E (Safeguarding against dropping by other design features incorporated in the suspension system of vertically moving power operated door leaves); l) introducing Annex ZA for harmonization of EN 12453 under MD. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12453:2017
EN 12453:2017 (E) 6 Introduction This document is a type C document as stated in EN ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance etc.) Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. This document has been prepared to meet the needs of manufacturers, users and safety enforcement authorities, with the primary purpose of providing design and performance for safety in use of power operated industrial, commercial and garage doors and gates used by vehicular traffic. Mechanical aspects of the doors are covered by normative references to prEN 12604:2014. SIST EN 12453:2017
EN 12453:2017 (E) 7 1 Scope This European Standard specifies requirements and test methods for the safety in use of power operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is
giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection. This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4. All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard. This European Standard does not apply to: — lock gates and dock gates; — doors on lifts; — doors on vehicles; — armoured doors; — doors mainly for the retention of animals, unless they are at the site perimeter ; — theatre textile curtains; — horizontally moving power operated doors mainly intended for pedestrian use; — doors outside the reach of people (such as crane gantry fences); — railway barriers; — barriers intended solely for use by pedestrians; — barriers used solely for vehicles on motorways. Whenever the term “door” is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard. This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard. NOTE Noise emission of power-operated doors is not a significant hazard for the users of these products. It is a comfort aspect. This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard. SIST EN 12453:2017
EN 12453:2017 (E) 8 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349:1993+A1:2008, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 12433-1:1999, Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors EN 12433-2:1999, Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors prEN 12604:2014, Industrial, commercial and garage doors and gates — Mechanical aspects — Requirements and test methods EN 12635:2002+A1:2008, Industrial, commercial and garage doors and gates — Installation and use EN 12978:2003+A1:2009, Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods EN 60335-1:2012, Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2012) EN 60335-2-95:2015, Safety of household and similar electrical appliances — Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2015) EN 60335-2-103:2015, Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2015) EN 60529:1991, Degrees of protection provided by enclosures (IP Code) EN 60204-1:20061, Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN 61000-6-1:2007, Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments EN 61000-6-2:2005, Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000-6-3:2007, Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-4:2007, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments EN 61032:1998, Protection of persons and equipment by enclosures - Probes for verification
1 As impacted by EN 60204-1:2006/A1:2009 and EN 60204-1:2006/AC:2010. SIST EN 12453:2017
EN 12453:2017 (E) 9 EN ISO 4413:2010, Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 12100:2010, Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13849-1:2015, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) IEC 60417:2002, Graphical symbols for use on equipment ISO 7000:2014, Graphical symbols for use on equipment — Registered symbols 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010, EN 12433-1:1999, EN 12433-2:1999, EN 12978:2003+A1:2009 and the following apply. 3.1 domestic garage door door used on a domestic garage which is provided for one single household only and where the door does not protrude into a public area 3.2 drive unit power operated mechanism, including controls, for moving, positioning and retaining the door leaf Note 1 to entry: Drive units include controls to move the door leaf, except entrapment protection systems. [SOURCE: EN 12433-2:1999, 6.1] 3.3 drive motor and other components that control the movement of the driven part Note 1 to entry: Examples of components are gears, controls, brakes, components for power transmission from the drive to the driven part (e.g. trolleys, rails, levers, etc.) and entrapment protection systems. Note 2 to entry: The driven part is the part of a gate, door or barrier that is intended to be moved by the drive. 3.4 opening gap distance between the main closing edge and the opposing closing edge 3.5 non-automatic operated door door that operates only after intentional activation (hold-to-run control mode or impulse activation) by the user in both directions SIST EN 12453:2017
EN 12453:2017 (E) 10 3.6 pressure sensitive pr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.