SIST EN IEC 62386-224:2018

Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source (device type 23) (IEC 62386-224:2018)

This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear with non-replaceable light source.
NOTE Requirements for testing individual products during production are not included.

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 224: Besondere Anforderungen für Betriebsgeräte - Integrierte Lichtquelle (Gerätetyp 23) (IEC 62386-224:2018)

Interface d'éclairage adressable numérique - Partie 224: Exigences particulières pour les appareillages de commande - Source de lumière non remplaçable (dispositifs de type 23) (IEC 62386-224:2018)

L'IEC 62386-224:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d’éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu.

Digitalni naslovljivi vmesnik za razsvetljavo - 224. del: Posebne zahteve za krmilja - Nezamenljiv vir svetlobe (naprava tipa 23) (IEC 62386-224:2018)

Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali, ki je v skladu z zahtevami standarda IEC 61347 (vsi deli), z dodatkom DC napajalnih enot.
Ta dokument se uporablja samo s standardoma IEC 62386-102:2014 in IEC 62386-102:2014/AMD1: – krmilja z nezamenljivim virom svetlobe.
OPOMBA: Zahteve za preskušanje posameznih proizvodov med proizvodnjo niso vključene.

General Information

• Status: Published
• Publication Date: 12-Jun-2018
• ICS: 29.140.50 - Lighting installation systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-May-2018
• Due Date: 29-Jul-2018
• Completion Date: 13-Jun-2018
• Ref Project: EN IEC 62386-224:2018 - Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source (device type 23)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62386-224:2018
01-september-2018
Digitalni naslovljivi vmesnik za razsvetljavo - 224. del: Posebne zahteve za krmilja -
Nezamenljiv vir svetlobe (naprava tipa 23) (IEC 62386-224:2018)
Digital addressable lighting interface - Part 224: Particular requirements for control gear -
Non-replaceable light source (device type 23) (IEC 62386-224:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 224: Besondere
Anforderungen für Betriebsgeräte - Integrierte Lichtquelle (Gerätetyp 23) (IEC 62386-
224:2018)
Interface d'éclairage adressable numérique - Partie 224: Exigences particulières pour les
appareillages de commande - Source de lumière non remplaçable (dispositifs de type
23) (IEC 62386-224:2018)
Ta slovenski standard je istoveten z: EN IEC 62386-224:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN IEC 62386-224:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62386-224:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62386-224:2018


EUROPEAN STANDARD EN IEC 62386-224

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2018
ICS 29.140.50; 29.140.99

English Version
Digital addressable lighting interface - Part 224: Particular
requirements for control gear - Non-replaceable light source
(device type 23)
(IEC 62386-224:2018)
Interface d'éclairage adressable numérique - Partie 224: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages de 224: Besondere Anforderungen für Betriebsgeräte -
commande - Source de lumière non remplaçable Integrierte Lichtquelle (Gerätetyp 23)
(dispositifs de type 23) (IEC 62386-224:2018)
(IEC 62386-224:2018)
This European Standard was approved by CENELEC on 2018-04-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62386-224:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62386-224:2018
EN IEC 62386-224:2018 (E)


European foreword
The text of document 34/404/CDV, future edition 1 of IEC 62386-224, prepared by IEC/TC 34 "Lamps
and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62386-224:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2019-01-26
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-04-26
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62386-224:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61347 (all parts) NOTE Harmonized as EN 61347 (all parts).
IEC 61347-1 NOTE Harmonized as EN 61347-1.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62386-224:2018
EN IEC 62386-224:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year

IEC 62386-101 2014 Digital addressable lighting interface - Part EN 62386-101 2014
1
+ A1 101: General requirements - System
components

IEC 62386-102 2014 Digital addressable lighting interface - Part EN 62386-102 2014
2
+ A1 102: General requirements - Control gear



1
Under preparation. Stage at the time of publication: IEC CCDV 62386-101/AMD1:2018.
2
Under preparation. Stage at the time of publication: IEC CCDV 62386-102/AMD1:2018.
3

---------------------- Page: 5 ----------------------

SIST EN IEC 62386-224:2018

---------------------- Page: 6 ----------------------

SIST EN IEC 62386-224:2018




IEC 62386-224

®


Edition 1.0 2018-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Digital addressable lighting interface –

Part 224: Particular requirements for control gear – Non-replaceable light source

(device type 23)




Interface d'éclairage adressable numérique –

Partie 224: Exigences particulières pour les appareillages de commande –


Source de lumière non remplaçable (dispositifs de type 23)













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5505-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62386-224:2018
– 2 – IEC 62386-224:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General . 8
4.1 General . 8
4.2 Version number . 8
5 Electrical specification . 8
6 Interface power supply . 8
7 Transmission protocol structure . 8
8 Timing . 8
9 Method of operation . 8
9.1 General . 8
9.2 Lamp failure . 8
10 Declaration of variables . 9
11 Definition of commands . 9
11.1 General . 9
11.2 Overview sheets . 9
11.3 Application extended commands . 10
11.3.1 General . 10
11.3.2 Queries. 10
11.4 Special commands . 10
11.4.1 General . 10
11.4.2 ENABLE DEVICE TYPE (data) . 10
Bibliography . 11

Figure 1 – IEC 62386 graphical overview . 5

Table 1 – Declaration of variables . 9
Table 2 – Application extended commands for this device type . 9

---------------------- Page: 8 ----------------------

SIST EN IEC 62386-224:2018
IEC 62386-224:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 224: Particular requirements for control gear –
Non-replaceable light source (device type 23)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparent
...