SIST EN ISO 105-Z08:1999

Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995)

This standard specifies a method for determining the electrolyte stability of reactive dyes.

Textilien - Farbechtheitsprüfungen - Teil Z08: Bestimmung der Löslichkeit und der Lösungsbeständigkeit von Reaktivfarbstoffen in Gegenwart von Elektrolyten (ISO 105-Z08:1995)

Dieser Teil von ISO 105 legt ein Verfahren fest zur Bestimmung der Löslichkeit und Lösungsbeständigkeit von Reaktivfarbstoffen für die Anwendung im Auszieh- und Kontinueverfahren in Gegenwart von Elektrolyten.

Textiles - Essais de solidité des teintures - Partie Z08: Détermination de la solubilité et de la stabilité en solution des colorants réactifs en présence d'électrolytes (ISO 105-Z08:1995)

Traite des antennes utilisées dans les stations terriennes de télécommunications par satellites. Donne les méthodes permettant de mesurer le découplage de polarisation et le gain en puissance, avec des annexes consacrées à l'analyse des erreurs et à la précision de mesure du gain.

Tekstilije - Preskušanje barvne obstojnosti - Del Z08: Ugotavljanje topnosti in stabilnosti raztopin reaktivnih barvil v prisotnosti elektrolitov (ISO 105-Z08:1995)

General Information

• Status: Published
• Publication Date: 28-Feb-1999
• ICS: 59.080.01 - Textiles in general
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-1999
• Due Date: 01-Mar-1999
• Completion Date: 01-Mar-1999
• Ref Project: EN ISO 105-Z08:1997 - Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 105-Z08:1999
01-marec-1999
Tekstilije - Preskušanje barvne obstojnosti - Del Z08: Ugotavljanje topnosti in
stabilnosti raztopin reaktivnih barvil v prisotnosti elektrolitov (ISO 105-Z08:1995)
Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution
stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995)
Textilien - Farbechtheitsprüfungen - Teil Z08: Bestimmung der Löslichkeit und der
Lösungsbeständigkeit von Reaktivfarbstoffen in Gegenwart von Elektrolyten (ISO 105-
Z08:1995)
Textiles - Essais de solidité des teintures - Partie Z08: Détermination de la solubilité et
de la stabilité en solution des colorants réactifs en présence d'électrolytes (ISO 105-
Z08:1995)
Ta slovenski standard je istoveten z: EN ISO 105-Z08:1997
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 105-Z08:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 105-Z08:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 105-Z08:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 105-Z08:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 105-Z08:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 105-Z08:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 105-Z08:1999
ISO
INTERNATIONAL
105-208
STANDARD
First edition
1995-06-15
Tests for colour fastness -
Textiles -
Part 208:
Determination of solubility and Solution
stability of reactive dyes in the presence of
electrolytes
Textiles - Essais de soliditk des teintures -
Partie 208: Determination de Ia solubilit6 et de Ia stabilite en solution des
coloran ts r6ac tifs en prhence d Wectrolytes
Reference number
ISO 105-ZO8:1995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 105-Z08:1999
ISO 105=208:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 105-208 was prepared by Technical Committee
lSO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and
coloran ts.
ISO 105 was previously published in thirteen “Parts ”, each designated by
a letter (e.g. “Part A ”), with publication dates between 1978 and 1985.
Esch part contained a series of “sections ”, each designated by the re-
spective part letter and by a two-digit serial number (e.g. “Section AO1 “).
These sections are now being republished as separate documents, them-
selves designated “Parts” but retaining their earlier alphanumeric desig-
nations. A complete list of these Parts is given in ISO 105-AOI .
Annex A of this part of ISO 105 is for information only.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 105-Z08:1999
INTERNATIONAL STANDARD 0 ISO ISO 105-208:1995(E)
Textiles - Tests for colour fastness -
Part 208:
Determination of solubility and Solution stability of reactive
dyes in the presence of electrolytes
ture. A specified amount of the desired electrolyte
1 Scope
Solution is added and the resultant Solution either fil-
tered immediately or stored for a specified time at a
This patt of ISO 105 describes a method for the de-
specified temperature and subsequently filtered under
termination of the solubility and the Solution stability
suction.
of reactive dyes for use in batchwise and continuous
dyeing processes in the presence of electrolytes.
The solubility and/or Solution stability limits of the dye
Solution to the addition of electrolyte are determined
Several factors which may influence test results
NOTE 1
are listed in annex A. by visual assessment of the filter residues and the
measured flow-through time of the filtrate.
2 Normative references
4 Apparatus and reagents
The following Standards contain provisions which,
4.1 Erlenmeyer flask, wide-mouthed, capacity
through reference in this text, constitute provisions
500 ml, complying with ISO 1773.
of this part of ISO 105. At the time of publication, the
editions indicated were valid. All Standards are subject
4.2 Heating bath, thermostatically controlled, with
to revision, and Parties to agreements based on this
part of ISO 105 are encouraged to investigate the magnetic stirring bar 40 mm long by 6 mm diameter,
possibility of applying the most recent editions of the Speed of stirrer 500 r/min to 600 r/min.
Standards indicated below. Members of IEC and ISO
maintain registers of currently valid International 4.3 Water bath, with temperature regulator
Standards. (heating/cooling) for adjusting the storage tempera- ’
ture.
ISO 1773: 1976, Laborstory glassware - Boiling
flasks (narrow-necked).
4.4 Nutsch filter (Büchner funnel), heatable, of
glass, steel or porcelain, of inner diameter 70 mm,
ISO 3696: 1987, Water for analytical laboratory use -
capacity at least 200 ml, having more than 100 holes
Specification and test methods.
with a total surface area of holes (evenly distributed)
of not less than 200 mm*.
3 Principle
4.5 Thermostatic device (optional), with circulation
pump to adjust temperature of Nutsch filter.
Several solutions of known concentration including
the Solution stability limit, of the dye to be tested are
prepared at a specified temperature in accordance 4.6 Macuum apparatus.
with the dye manufacturer ’s recommendation. The
dye solution is adjusted to the desired test tempera- 46.1 Suction bottle, capacity 1 litre to 2 litres.

---------------------- Page: 9 ----------------------

SIST EN ISO 105-Z08:1999
0 ISO
ISO 105-ZO8:1995(E)
4.6.2 Piston or membrane pump, of sufficiently on the type of dyestuff being tested. Examples of
high suction capacity to create a full vacuum of at combinations of test Parameters are given in table 1.
least 50 kPa under pressure.
6 Preparation of solutions
maintain a given
4.6.3 Apparatus to adjust and
manometer.
vacuum, preferably coupled with a
6.1 The concentrations at which the test dye sol-
utions are prepared shall be Chosen considering the
.
expected Solution stabi Iity limit of the dye in the
4.7 Stopwatch, to measure flow-through time.
presence of electrolyte:
4.8 Filter Paper, circular, 70 mm + 2 mm di-
Expected limit to fall Stepwise increase in
ameter-.
between dye concentration ap-
proaching limit
NOTE 2 Filter Papers of the following characteristics
have been found suitable:
1 g/l to 10 g/l
1 sll
Two typical sets
Property
of values
10 g/l to 30 g/l
5 SI1
30 g/l to 100 g/l
10 so
92 121
Grammage, g/m*
The maximum dye concentrations used for the test
210 330
Thickness, Pm
shall be:
1
Air resistance, Gurley, ~1100 ml 316
Wet burst strength, kPa >l >4
30 g/l for batchwise dyeing processes;
smooth smooth
Surface appearance
100 g/l for continuous dyeing processes.
See ISO 105-AO1 :1994, clause 8, note 1 for information on
sources of supply of suitable filter paper- 6.2 Place a known amount of the dye to be tested
in the wide-mouthed Erlenmeyer flask (4.1) and add
The type of filter Paper used and the manufacturer
150 ml water (4.9) at about 60 “C (but not above the
shall be listed in the test report.
dissolving temperature). Swirl the flask by hand until
the dye is fully wetted out (predissolving).
4.9 Water, complying with grade 3 of ISO 3696
If the addition of urea is required as a dissolving agent
(recommended pH 7), used as solvent.
in accordance with the recommendations of the dye
manufacturer, reduce the amount of water by 1 ml
4.10 Electrolyte solution (stock Solution), prepared
per gram of urea added, so as not to Change the total
using grade 3 water (4.9) according to the concen-
volume of the test Solution.
...