ISO 16093:2017 deals with all significant hazards, hazardous situations and events to sawing machines as defined in Clause 3, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 16093:2017 is applicable to (metal) sawing machines which are manufactured after the date of publication of this document.
When additional processing (i.e. milling, boring, marking, finishing operation, etc.) is considered, this document can serve as a basis for safety requirements. For more detailed information, refer to the bibliography.
ISO 16093:2017 deals with noise hazards but does not provide a full noise test code. It is intended to draft such a code in the next revision of this document.
ISO 16093:2017 does not include requirements and safety measures for fire and explosion hazards. It is intended to deal with them in the next revision of this document.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01.
TC - Modifications/corrections in the E mother standard and in the two other reference versions regarding references to EN 954-1 in Clauses 2 and 5.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting–up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade.
1.2   This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting.
1.3   This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine.
1.4   This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade.
1.2   This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting.
1.3   This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine.
1.4   This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day