IEC 60809:2021 is applicable to electric light sources for use in automotive applications, for example in road illumination devices and/or light signalling devices for road vehicles.
It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject to other legislations.
This fourth edition cancels and replaces the third edition published in 2014, Amendment 1:2017, Amendment 2:2017 and Amendment 3:2019. This edition constitutes a technical revision.
This edi...
view more

    • sale 15% off
    • Standard
      94 pages
      English language

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces...
view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

IEC PAS 63329:2020(E) This Book 14 defines three socketable LED Light Engines (with integrated Electronic Control Gears) and three socketable LED Modules (without integrated Electronic Control Gears). These LED Modules and LLEs have a rectangular shape and are typically applied in general lighting applications. These products are intended to be installed and replaced by professionals and non-professionals. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. ...view more

    • sale 15% off
    • Technical specification
      80 pages
      English language

IEC PAS 63228:2020(E) This Book 12 defines LED Arrays with a rectangular shape and a circular light emitting surface. For each LED Array, this Book 12 also defines the mechanical interface between the LED Array and the corresponding Holder. The mechanical interface between the Holder and the Luminaire (e.g. outline, OCA and mounting holes) is defined in [Book-10]. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general ...view more

    • sale 15% off
    • Technical specification
      96 pages
      English language

IEC PAS 63324:2020(E) This Book 10 defines interfaces between LED Modules, associate components (Holders) and luminaires. Not all interface descriptions are applicable to LED Modules or Holders, but where applicable they are identical. This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant components of LED Luminaires.

    • sale 15% off
    • Technical specification
      93 pages
      English language

IEC 62868-2-1:2020 specifies safety requirements for semi-integrated organic light emitting diode modules operating with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power and have a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.

    • sale 15% off
    • Standard
      16 pages
      English and French language

IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.

    • sale 15% off
    • Standard
      21 pages
      English and French language

IEC 62868-1:2020 specifies general safety requirements of OLED products for use on DC supplies up to 1000 V or AC supplies up to 1000 V at 50 Hz or 60 Hz for indoors and similar general lighting purposes.
This document applies to any OLED light sources which are not covered by IEC 62868-2 (all parts).
This first edition cancels and replaces IEC 62868 published in 2014.

    • sale 15% off
    • Standard
      41 pages
      English and French language

IEC 63146:2019 establishes requirements for specification sheets relating to light emitting diode (LED) packages designed for the emission of white light for general lighting applications. This document does not contain compliance criteria.

    • sale 15% off
    • Standard
      17 pages
      English and French language

IEC TR 63130:2018(E) describes the current state of experts’ opinions on the standardization of metal halide lamps to cover the relevant parameters for hot restrike and for dimming in combination with low frequency square wave ballasts. It provides guidelines for supplementing or modifying IEC 61167 in order that these conditions are covered.

    • sale 15% off
    • Technical report
      14 pages
      English language

IEC 61167:2018 specifies the performance requirements for metal halide lamps for general lighting purposes.
This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition.
a) A set of new lamp data sheets has been introduced for lamp types designed for replacing high pressure sodium lamps.
b) A set of new lamp data sheets has bee...
view more

    • sale 15% off
    • Standard
      809 pages
      English and French language

IEC PAS 63166:2018(E) This book 7 defines several LED modules. Each LED module has a rectangular shape and the only restriction to the light emitting surface is that no light is emitted in the direction of the reference plane of the LED module.
This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant LED Light Engines, associated components and Luminaires.

    • sale 15% off
    • Technical specification
      97 pages
      English language

IEC 62031:2018 is also available as IEC 62031:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62031:2018 specifies general and safety requirements for light-emitting diode (LED) modules:
- non-integrated LED modules (LEDni modules) and semi-integrated LED modules (LEDsi modules) for operation under constant voltage, constant current or constant power;
- Integrated LED modules (LEDi...
view more

    • sale 15% off
    • Standard
      46 pages
      English and French language

IEC 60810:2017 is also available as IEC 60810:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60810:2017 is applicable to filament lamps, discharge lamps, LED light sources and LED packages to be used in road vehicles, i.e. in headlamps, fog-lamps, signalling lamps and interior lighting. It is especially applicable to those lamps and light sources which are listed in IEC 60809.
This...
view more

    • sale 15% off
    • Standard
      182 pages
      English and French language

IEC 63013:2017 is applicable to LED packages for general lighting services.
It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used.

    • sale 15% off
    • Standard
      29 pages
      English and French language

The contents of the interpretation sheet 1 of July 2017 have been included in this copy.

    • sale 15% off
    • Standard
      13 pages
      English and French language

IEC TS 62861:2017(E) This Technical Specification provides guidelines for establishing confidence in product reliability using principal component testing for LED light sources and LED luminaires for general lighting. It includes methods and criteria using initial qualification tests and accelerated stress tests of the principal components. The performance of any principal component will influence the performance of the final product.
Techniques to validate full lifetime claims and lumen mainte...
view more

    • sale 15% off
    • Technical specification
      65 pages
      English language

IEC 62931:2017 This document specifies the safety and interchangeability requirements together with the test methods and conditions required to show compliance of non-integrated tubular LED lamps, intended for general lighting purposes, having:
a rated wattage up to 70 W,
a rated voltage up to 190 V ripple free DC,
GX16t-5 cap as listed in Table 1.  The requirements of this document relate only to type testing.

    • sale 15% off
    • Standard
      61 pages
      English and French language

IEC 62922:2016 specifies the performance requirements of OLED tiles and panels for use on DC supplies up to 120 V or AC supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purposes.

    • sale 15% off
    • Standard
      49 pages
      English and French language

IEC 60969:2016 is available as IEC 60969:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60969:2016 specifies performance requirements together with test methods and conditions required to show compliance of self-ballasted compact fluorescent lamps intended for general lighting services. This second edition cancels and replaces the first edition published in 1988, Amendment 1:1991 an...
view more

    • sale 15% off
    • Standard
      65 pages
      English and French language

IEC 62838:2015 specifies the safety and interchangeability requirements, together with the test methods and conditions, required to show compliance of LED lamps with integrated means for stable operation, intended for domestic and similar general lighting purposes.
The contents of the corrigendum of October 2017 have been included in this copy.

    • sale 15% off
    • Standard
      29 pages
      English and French language

The contents of the corrigendum of June 2015 have been included in this copy.

    • sale 15% off
    • Standard
      30 pages
      English and French language

IEC 60968:2015 specifies the safety and interchangeability requirements, together with the test methods and conditions required to show compliance of tubular fluorescent lamps with integrated means for controlling starting and stable operation (self-ballasted fluorescent lamps). This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous ...view more

    • sale 15% off
    • Standard
      59 pages
      English and French language

IEC 60809:2014 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as non-replaceable. This third edition cancels and replaces the second edition (1995), its Amendment 1 (1996), its Amendment 2 (2002), its Amendment 3 (2004), its Amendment 4 (2009) and its Amendment 5 (2012). This edition constitutes a technical revi...view more

    • sale 15% off
    • Standard
      162 pages
      English and French language

IEC 62717:2014 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC PAS 62717 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC PAS 62717:
- all terms and definitions are aligned with IEC 62504 and relevant documents of CIE. For example, general terms lik...
view more

    • sale 15% off
    • Standard
      96 pages
      English and French language

IEC 62776:2014 specifies the safety and interchangeability requirements, and the exchange operation together with the test methods and conditions required to show compliance of double-capped LED lamps with G5 and G13 caps, intended for replacing fluorescent lamps with the same caps, having:
- a rated power up to 125 W;
- a rated voltage up to 250 V.
The contents of the corrigendum of March 2015 and interpretation sheet 1 of June 2018 have been included in this copy.

    • sale 15% off
    • Standard
      59 pages
      English and French language

IEC 62868:2014 specifies the safety requirements of OLED tiles and panels for use on d.c. supplies up to 120 V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purpose.

    • sale 15% off
    • Standard
      34 pages
      English and French language

IEC/TR 62778:2014 brings clarification and guidance concerning the assessment of blue light hazard of all lighting products which have the main emission in the visible spectrum (380 nm to 780 nm). By optical and spectral calculations, it is shown what the photobiological safety measurements as described in IEC 62471 tell us about the product and, if this product is intended to be a component in a higher level lighting product, how this information can be transferred from the component product (e...view more

    • sale 15% off
    • Technical report
      37 pages
      English language

The contents of the corrigenda of September 1993 and May 1996 have been included in this copy.

    • sale 15% off
    • Standard
      10 pages
      English and French language

IEC 62035:2014 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This second edition cancels and replaces the first edition published in 1999, AMD1:2003 and AMD2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. Photobiological safety requirements are taken care of on basis of the risk group concept of IEC 62471 and the techni...view more

    • sale 15% off
    • Standard
      95 pages
      English and French language

IEC 62707-1:2013 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages. Other parts of the IEC 62707 series covering chromaticity of coloured LED packages, luminous flux/luminous intensity, colour rendering and forward voltage are in preparation or under consideration. This first edition cancels and replaces IEC/PAS 62707-1, published in 2011.

    • sale 15% off
    • Standard
      53 pages
      English and French language

Provides a format for data interchange that can be used to transfer multichannel pulse height data between laboratories and to distribute this data for testing purposes.

    • sale 15% off
    • Standard
      157 pages
      English and French language

This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm, supplied either in the form of sheets or rolls.[
]The contents of the corrigendum of August 1995 have been included in this copy.

    • sale 15% off
    • Standard
      24 pages
      English and French language

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:
- a rated power up to 60 W;
- a rated voltage of > 50 V a.c. up to 250 V a.c.;
- a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition...
view more

    • sale 15% off
    • Standard
      87 pages
      English and French language