This document specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this document, the term "metals" refers to pure metals and alloys. The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environmen...view more

    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Draft
      14 pages
      French language
    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      French language
    • sale 15% off
    • Draft
      9 pages
      English language

This document specifies the general requirements for control elements in the life cycle of corrosion control engineering. It is applicable to all types of corrosion control engineering programmes.

    • sale 15% off
    • Draft
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language

This document specifies the general requirements for risk assessment in the life cycle of corrosion control engineering. This document is applicable to a risk assessment of all types of corrosion control engineering programmes.

    • sale 15% off
    • Draft
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Draft
      19 pages
      English language

This document specifies the general requirements for control elements in the life cycle of pipeline corrosion control engineering. This document is applicable to all types of pipeline corrosion control engineering programmes.

    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language

This document gives guidelines for the corrosion testing of metals and alloys exposed in deep-sea water, including the selection of the test site, components and assembly of the test system, specimen preparation, testing procedure, evaluation after the retrieval from exposure sites and test report. This document is applicable to the general corrosion exposure testing of metals and alloys as well as localized corrosion tests such as stress corrosion cracking (SCC) testing, galvanic corrosion test...view more

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Draft
      11 pages
      English language

This document specifies the methodology of using multielectrode arrays for the measurement of the corrosion, especially localized corrosion, of metals and alloys. It can be used as a powerful tool for studying the initiation and propagation processes of localized corrosion. It is also a useful tool for long-term corrosion monitoring in the field, especially for localized corrosion, and for obtaining high throughput results for the evaluation of metals with different compositions and/or physical ...view more

    • sale 15% off
    • Draft
      20 pages
      English language
    • sale 15% off
    • Standard
      20 pages
      English language

This document specifies a test method for atmospheric corrosion measurements, using two-electrode electrochemical sensors. It is applicable to measurements of the corrosion rate of uncoupled metal surfaces (i.e. "free" corrosion rate), galvanic corrosion rate, conductance of thin film solutions and barrier properties of organic coatings. It specifies electrochemical sensors that are used with or without organic coatings. The sensors are applicable to corrosion measurements made in laboratory tes...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Draft
      22 pages
      English language

This document specifies procedures for testing the resistance to localized corrosion of Ti alloys fabricated via additive manufacturing (AM) method. This document regulates the electrochemical critical localized corrosion temperature (E-CLCT) of the AM Ti materials for a comparative evaluation of resistance to localized corrosion.

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language

This document gives guidelines for the selection of procedures that can be used in the identification and examination of corrosion pits and in the evaluation of pitting corrosion and pit growth rate.

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Draft
      12 pages
      English language

This document specifies a method for the electrochemical measurement of ion transfer resistance of the rust layer formed on weathering steel alloys in order to assess their protective properties against corrosion thereafter[3]. This method uses an electrochemical AC impedance measurement[4][5][6][7][8], together with harmonic analysis, to identify the ion transfer resistance, and a rust thickness measurement to characterize the stability of the protective rust layer in terms of corrosion protect...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      English language

This document establishes a classification of low corrosivity of indoor atmospheres. It specifies the reference metals for which a corrosion attack after a defined exposure period is used for determining corrosivity categories of indoor atmospheres of low corrosivity. It defines corrosivity categories of indoor atmospheres according to corrosion attack on standard specimens. It indicates important parameters of indoor atmospheres that can serve as a basis for an estimation of indoor corrosivity....view more

    • sale 15% off
    • Standard
      19 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      French language
    • sale 15% off
    • Standard
      19 pages
      English language

This document specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc, steel and lead. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Standard
      15 pages
      English language

This document specifies the apparatus, materials, specimen preparation, procedures, results and reports for comparing the corrosion rates of steel reinforcement bars in concrete in simulated marine and coastal environments. This document is not applicable to galvanized steel reinforcement. It gives guidelines for material selection in corrosion design. In order to illustrate the methodology, Annex A provides examples of experimental results.

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      11 pages
      English language

This document specifies procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking. The term "metal" as used in this document includes alloys.

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      17 pages
      French language

This document specifies general principles for carrying out corrosion tests under conditions of constant immersion. Some of these general principles are applicable to other types of corrosion testing. This document does not cover important procedures for stress corrosion testing, such as those given in ISO 7539 (all parts).

    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies requirements for the design, installation, positioning, sizing, use and maintenance of coupons for the assessment of the effectiveness of cathodic protection (CP) of buried and immersed metallic structures, such as pipelines, in the case of normal operation as well as AC and DC interference conditions.

    • sale 15% off
    • Standard
      22 pages
      English language

This document defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations. NOTE 1 Throughout the document, IUPAC rules for electrode potential signs are applied. The term "metal" is also used to include alloys and other metallic materials. NOTE 2 Terms and definitions related to the inorganic surface treatment of metals are given in ISO 2080.

    • sale 15% off
    • Standard
      29 pages
      English language
    • sale 15% off
    • Standard
      29 pages
      French language

This document specifies methods for measuring the environmental parameters used to classify the corrosivity of indoor atmospheres on metals and alloys.

    • sale 15% off
    • Standard
      11 pages
      French language
    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies protection criteria for determining the AC corrosion risk of cathodically protected pipelines. It is applicable to buried cathodically protected pipelines that are influenced by AC traction systems and/or AC power lines. In the presence of AC interference, the protection criteria given in ISO 15589-1 are not sufficient to demonstrate that the steel is being protected against corrosion. This document provides limits, measurement procedures, mitigation measures, and informa...view more

    • sale 15% off
    • Standard
      40 pages
      French language
    • sale 15% off
    • Standard
      38 pages
      English language

This document specifies a method for assessing the resistance of materials or products to a humid atmosphere containing sulfur dioxide. This method is applicable to testing metals and alloys, metallic and non-organic coatings and organic coatings.

    • sale 15% off
    • Standard
      14 pages
      English language

This document specifies a method for determining the growth rate of small surface cracks in an aqueous environment (including atmospheric exposure) based on measurement of the change in size of the crack with exposure time. The methodology can be applied to stress corrosion and corrosion fatigue crack propagation. It also describes the varied methodologies for the generation of crack precursors including accelerated generation of single pits. Industries for whom this document is relevant include...view more

    • sale 15% off
    • Standard
      18 pages
      English language
    • sale 15% off
    • Standard
      20 pages
      French language

This document specifies a method for the determination of resistance to stress corrosion cracking (SCC) of magnesium alloys intended for use in structural applications (such as magnesium front end, gearbox and clutch housing units, steering column parts, shift actuators, valve covers and housings, brackets and intake manifold blades, electronic devices, power tools and medical equipment). The method allows determination of the resistance to SCC as a function of the chemical composition, the meth...view more

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

This document specifies procedures for designing, preparing and using precracked specimens for investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation and use of precracked specimens for investigating susceptibility to stress corrosion. Recommendations concerning notched specimens are given in Annex A. The term "metal" as used in this document includes alloys. Because of the need to confine plasticity at the crack tip, precracked specimens are not s...view more

    • sale 15% off
    • Standard
      43 pages
      French language
    • sale 15% off
    • Standard
      40 pages
      English language

This document specifies the apparatus and test procedure to be used in conducting accelerated corrosion tests for the comparative evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in salt-contaminated outdoor environments. The test involves cyclic exposure of the specimens to neutral salt mist, "dry" and "wet" conditions. The type of test specimen and the exposure period are not specified. The particular advantages of this test over...view more

    • sale 15% off
    • Standard
      15 pages
      English language

This document specifies two accelerated corrosion-test procedures, Methods A and B, for the comparative evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in outdoor salt and/or acid rain environments. It also specifies the apparatus used. The two tests involve cyclic exposure of the specimens to acidified salt spray, "dry" and "wet" conditions. The particular advantages of the two tests over conventional accelerated tests, such as t...view more

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      19 pages
      English language

ISO 19097-1:2018 specifies accelerated life test method of mixed metal oxide anodes for impressed current cathodic protection used in concrete. The accelerated life test results can be used to compare the durability of the anodes and to evaluate whether the anodes can comply with required specifications of design life expectancy at rated current output. ISO 19097-1:2018 is also applicable to other anode systems that are used as impressed current anodes embedded in concrete with suitably modified...view more

    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

ISO 19097-2:2018 specifies accelerated life test method of mixed metal oxide anodes for impressed current cathodic protection used in soil or natural waters. The accelerated life test results can be used to compare the durability of the anodes and to evaluate whether the anodes can comply with required specifications of design life expectancy at rated current output.

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

ISO 11130:2017 specifies a method for assessing the corrosion resistance of metals by an alternate immersion test in salt solution, with or without applied stress. The test is particularly suitable for quality control during the manufacture of metals including aluminium alloys and ferrous materials, and also for assessment purposes during alloy development. Depending upon the chemical composition of the test solution, the test can be used to simulate the corrosive effects of marine splash zones,...view more

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

ISO 12473 covers the general principles of cathodic protection when applied in seawater, brackish waters and marine mud. It is intended to be an introduction, to provide a link between the theoretical aspects and the practical applications, and to constitute a support to the other standards devoted to cathodic protection of steel structures in seawater. ISO 12473 specifies the criteria required for cathodic protection. It provides recommendations and information on reference electrodes, design c...view more

    • sale 15% off
    • Standard
      37 pages
      English language

ISO 19280:2017 specifies a methodology for ranking the crevice corrosion resistance of stainless steels and related alloys when exposed to oxidizing chloride solution. This document allows the measurement of critical crevice temperatures of tube/rod type specimens equal to those of plate type ones made up of the same material by chemical initiation of crevice corrosion, but not by the electrochemical method of ISO 18070. The test method in this document defines the apparatus and the procedure us...view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

ISO 15257:2017 defines five levels of competence (detailed in Clause 4) for persons working in the field of cathodic protection (CP), including survey, design, installation, testing, maintenance and advancing the science of cathodic protection. It specifies a framework for establishing these competence levels and their minimum requirements. Competence levels apply to each of the following application sectors: - on-land metallic structures; - marine metallic structures; - reinforced concrete stru...view more

    • sale 15% off
    • Standard
      31 pages
      English language
    • sale 15% off
    • Standard
      34 pages
      French language

ISO 3651-3:2017 specifies the determination of the intergranular corrosion susceptibility of low-Cr [less than 16 % Cr, less than 0,3 % Ni, less than 0,3 % Ti and less than 0,3 % Nb, less than 0,3 % (Ti + Atomic weight ratio Nb)] ferritic stainless steels in the 0,5 % sulfuric acid/copper sulfate test. It also specifies the purposes which may be assigned to the test. The method is applicable to stainless steels supplied in the form of rolled sheets and welded tubes and intended for use in a mild...view more

    • sale 15% off
    • Standard
      8 pages
      English language

ISO 6509-2:2017 specifies assessment criteria and provides guidance related to the corrosion type dezincification for the selection of copper alloys with a mass fraction of zinc of more than 15 %, exposed to fresh, saline waters or drinking water. The assessment criteria are based on the exposure tests in ISO 6509‑1. The materials can be in the form of a semi-finished product or in the form of a final product (fittings, valves, etc.). ISO 6509-2:2017 is not applicable to complex products like fl...view more

    • sale 15% off
    • Standard
      3 pages
      English language

ISO 9227:2017 specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection. It also describes the method employed to evaluate the corrosivity of the test cabinet environment. It does not specify the dimensions or types of test specimen...view more

    • sale 15% off
    • Standard
      19 pages
      French language
    • sale 15% off
    • Standard
      18 pages
      English language

ISO 12696:2016 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement. ISO 12696:2016 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buildings or s...view more

    • sale 15% off
    • Standard
      53 pages
      French language
    • sale 15% off
    • Standard
      47 pages
      English language

ISO/TR 16203:2016 provides information on the erosion corrosion test of materials in single-phase flowing liquids and guidance for selection of test methods.

    • sale 15% off
    • Technical report
      8 pages
      English language
    • sale 15% off
    • Technical report
      8 pages
      French language
    • sale 15% off
    • Technical report
      8 pages
      English language

ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of corrosion-promoting gases from industrial or traffic air pollution. ISO 21207:2015 specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests. The methods...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      English language

ISO 18070:2015 specifies a crevice forming technique and crevice former which are intended to be used for crevice corrosion testing of flat specimens or tubes of stainless steels, in corrosive solutions. This International Standard specifies no information concerning how the crevice corrosion testing shall be performed and how the attack shall be evaluated. The crevice former specified in this International Standard can be used for electrochemical measurements, if the specimens are designed for ...view more

    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language

ISO 18089:2015 describes the procedure for determining the critical crevice temperature (CCT) for stainless steels under potentiostatic control. The principal advantage of the test is the rapidity with which the CCT can be measured in a single test procedure. The CCT, as determined in this International Standard, can be used as a relative index of performance, for example, to compare the relative performance of different grades of stainless steel. The test described in this International Standar...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

ISO 16540:2015 provides guidelines for the use of four-point bend testing to evaluate the resistance of metals including carbon steel, low alloy steels, and corrosion resistant alloys (CRAs) to stress corrosion cracking. The method gives guidance on testing of both parent plate and welds and includes procedures for metals that have no distinct yield point in their stress-strain behaviour as well as metals with a distinct yield point. The emphasis in this International Standard is on the generic ...view more

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      18 pages
      English language

ISO 17918:2015 specifies procedures of on-site detection and evaluation in order to determine the effects of material deterioration such as material loss from the components and structures that are sensitive to selective corrosion in industrial facilities, including nuclear power plants. The methodology involves visual inspection and hardness measurements in situ complemented by sample removal. These procedures include (a) representative sampling of components sensitive to selective corrosion, (...view more

    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Standard
      21 pages
      English language

ISO 17093:2015 is intended to assist in corrosion testing by electrochemical noise measurement. It covers test procedures and analysis methods for reliable measurement of electrochemical noise for both uncoated and organically coated metal.

    • sale 15% off
    • Standard
      18 pages
      English language
    • sale 15% off
    • Standard
      20 pages
      French language

ISO 18069:2015 specifies the measurements of the corrosion rate of uniform corrosion for stainless steels and nickel based alloys in the intended liquids and the ability for the material to passivate after activation. This method is intended to be used for estimation of the uniform corrosion rate in liquids, under atmospheric conditions, for the chemical industry under specific environmental conditions and not as a qualification test. It can also be used to determine iso-corrosion diagrams and a...view more

    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language

ISO 16071:2015 specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h exposure to a slightly acidified solution of 1 % NaCl twice weekly, followed by a condition of controlled humidity cycling between 95 % RH and 50 % RH at a constant temperature of 35 °C. It does not specify the dimensions of the tests specimens, the exposure period to be used for a particular product, or the interpretation of the results. Such detai...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      English language

ISO 17245:2015 specifies the method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids which are under static conditions and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance. Two options are considered: a) using a stagnant inert gas environment, and b) using a flowing reactive gas environment. ISO 17245:2015 does not cover methods where test pieces are fully or partially embedded in a c...view more

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      English language

L'ISO 17224:2015 spécifie la méthode utilisée pour les essais de corrosion ŕ haute température de matériaux métalliques par application d'un dépôt de sel, de cendres et/ou d'autres substances, en les exposant ŕ des températures élevées dans un environnement gazeux contrôlé afin d'évaluer leur résistance ŕ la corrosion. Le dépôt est appliqué avant l'exposition aux températures élevées par pulvérisation, trempage ou peinture. L'ISO 17224:2015 ne traite pas des méthodes dans lesquelles les éprouvet...view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      English language

ISO 17248:2015 specifies the method for high temperature corrosion testing of metallic materials by embedding in a corrosive powder made up of salt, ash, and/or other solids and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance. Two options exist: fully embedding and partially embedding. Fully embedding is used in cases in which a mass change measurement is required. Partially embedding is used to investigate three potentially different inte...view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

ISO 7441:2015 specifies and compares methods for the determination of bimetallic corrosion of metals and coated metals in atmospheric exposure corrosion tests. The methods are intended for the determination of the amount and type of corrosion effect, arising in natural atmospheres, caused by contact with different metals.

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

ISO 17081:2014 specifies a laboratory method for the measurement of hydrogen permeation and for the determination of hydrogen atom uptake and transport in metals, using an electrochemical technique. The term "metal" as used in ISO 17081:2014 includes alloys. ISO 17081:2014 describes a method for evaluating hydrogen uptake in metals, based on measurement of steady-state hydrogen flux. It also describes a method for determining effective diffusivity of hydrogen atoms in a metal and for distinguish...view more

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      19 pages
      English language

ISO 6509-1:2014 specifies a method for the determination of dezincification depth of copper alloys with zinc exposed to fresh, saline waters or drinking water. The method is intended for copper alloys with a mass fraction of zinc more than 15 %. ISO 6509-1:2014 describes only the test methodology and does not set out criteria for acceptability of materials for a specific application. Acceptance criteria are described in ISO 6509‑2.

    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language