This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified e.g. in regulations. NOTE      Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot ...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      French language

This document specifies a procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. It is applicable to middle distillate and wide-cut fuels and is particularly specified for the performance of aviation gas turbine fuels. The test results are indicative of fuel thermal oxidation stability during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface at a specified temperat...view more

    • sale 15% off
    • Standard
      34 pages
      English language
    • sale 15% off
    • Standard
      37 pages
      French language
    • sale 15% off
    • Draft
      34 pages
      English language

This document specifies a method for the determination of the manual and automated closed cup flash point of combustible liquids having flash points between –30,0 °C to 75,0 °C. However, the precision given for this method is only valid for flash points in the range −8,5 °C to 75,0 °C. This document is not applicable to water-borne paints. NOTE 1  Water borne paints can be tested using ISO 3679[1]. NOTE 2  See 9.1 for the importance of this test in avoiding loss of volatile mat...view more

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      26 pages
      French language
    • sale 15% off
    • Draft
      24 pages
      English language
    • sale 15% off
    • Draft
      29 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Draft
      1 page
      English language

This document specifies procedures and requirements for the transfer of bunkers to vessels by bunker tankers using the Coriolis mass flow meter (MFM) system. It encompasses the process leading to the approval of the MFM system as installed on bunker tankers and post-approval bunkering operation. It covers terminology, specifications, requirements and procedures on metrology, system integrity, metering system selection and installation, MFM system verification, bunker delivery and dispute handlin...view more

    • sale 15% off
    • Standard
      49 pages
      English language
    • sale 15% off
    • Draft
      51 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language
    • sale 15% off
    • Draft
      2 pages
      English language

This document establishes a common basis for, and assistance in, the classification of applications and multiphase meters, as well as guidance and recommendations for the implementation and use of such meters. The so-called in-line multiphase flow meters (MPFMs) that directly measure the oil, water and gas flow rates, as well as the partial- and full-separation MPFMs are the main focus of this document. Conventional two- or three-phase separators are not included in this document. Only limited r...view more

    • sale 15% off
    • Technical specification
      98 pages
      English language
    • sale 15% off
    • Draft
      98 pages
      English language

This document specifies the quality requirements for Liquefied Natural Gas (LNG) used as a fuel for marine applications. It defines the relevant parameters to measure as well as the required values and the test reference methods for all those parameters. This document applies to LNG from any source, e.g. gas from conventional reservoirs, shale gas, coalbed methane, biomethane, synthetic methane. LNG described in this document can come from synthesis process out of fossil fuels or renewable sourc...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Draft
      21 pages
      English language
    • sale 15% off
    • Draft
      23 pages
      French language

This document establishes an extended classification which includes sub-categories of environmentally acceptable lubricants and specifies the minimum requirements for mineral or synthetic based lubricants for the categories CKH, CKJ and CKM, according to ISO 6743-6, and their sub-categories of environmentally acceptable lubricants, intended for the lubrication of open and semi-enclosed gears. This document covers the lubricants applied in the open and semi-enclosed gear systems most currently en...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

This document specifies Procedure A, using manual glass viscometers, and Procedure B, using glass capillary viscometers in an automated assembly, for the determination of the kinematic viscosity, ν, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, η, is obtained by multiplying the measured kinematic viscosity by the density, ρ, of the liquid. The ra...view more

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      French language
    • sale 15% off
    • Standard
      25 pages
      French language
    • sale 15% off
    • Draft
      24 pages
      English language

This document specifies a procedure for the determination of kinematic viscosity (ν) at 40 °C in the range from 2 mm2/s to 6 mm2/s by calculation from dynamic viscosity (η) and density (ρ) of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures of these using the Stabinger type viscometer. The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear str...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language

This document establishes the rating of diesel fuel oil in terms of an arbitrary scale of cetane numbers (CNs) using a standard single cylinder, four-stroke cycle, variable compression ratio, indirect injected diesel engine. The CN provides a measure of the ignition characteristics of diesel fuel oil in compression ignition engines. The CN is determined at constant speed in a pre-combustion chamber-type compression ignition test engine. However, the relationship of test engine performance to ful...view more

    • sale 15% off
    • Standard
      20 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      French language
    • sale 15% off
    • Draft
      20 pages
      English language

This document establishes an overview of test methods in the field to determine flash point and combustibility of petroleum and related products. It presents advice on application and specification development. This document is not intended to be a comprehensive manual on flash point and combustibility tests, and the interpretation of test results, however it covers the key aspects on these subjects.

    • sale 15% off
    • Technical report
      15 pages
      English language
    • sale 15% off
    • Technical report
      15 pages
      English language

This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass. The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 1189...view more

    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      41 pages
      French language
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language

This document specifies several methods for the empirical estimation of the consistency of lubricating greases and petrolatum by measuring the penetration of a standardized cone.

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      24 pages
      French language

This document specifies a method for the assessment of the persistence of a flame applied to the edge of a wick of non-flammable material immersed in fire-resistant fluid. This test does not determine the behaviour of a spray of fire-resistant fluid. NOTE Such test methods are specified in ISO 15029-1 and ISO 15029-2. This document specifies one of four basic tests for determining flammability. This document does not apply to certain liquids such as HFAE and HFAS liquids.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      French language

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications. This document excludes measures for cryogenic liquids and pressurized measures as used ...view more

    • sale 15% off
    • Standard
      70 pages
      English language
    • sale 15% off
    • Standard
      78 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      2 pages
      French language

This document specifies methods for obtaining samples of lubricating grease from production lots or shipments and gives instructions for inspecting greases in sales packages.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      1 page
      French language

This document specifies procedures and requirements for the transfer of bunkers to vessels involving bunker tankers, road tankers and shore pipelines. It is applicable to pre-delivery, delivery and post-delivery checks and documentation.

    • sale 15% off
    • Standard
      45 pages
      English language

This document specifies the minimum requirements of unused fire-resistant and less flammable hydraulic fluids for hydrostatic and hydrodynamic systems in general industrial applications. It is not intended for use in aerospace or power-generation applications, where different requirements apply. It provides guidance for suppliers and end users of these less hazardous fluids and to the manufacturers of hydraulic equipment in which they are used. Of the categories covered by ISO 6743-4, which clas...view more

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language

This document specifies the metrological and technical requirements for flowmeters intended to be used for the dynamic measurement of liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids. For LNG static volume measurement used in custody transfer, see ISO 10976. This document sets the best practice for the proper selection and installation of flowmeters in cryogenic applications and identifies the specific issues that can affect the performance of the flowmeter in use. Moreover,...view more

    • sale 15% off
    • Standard
      47 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language

This document specifies the methodology for the regular monitoring of the test method precision achieved versus the precision published in the standard test method using data from proficiency testing schemes (PTSs) supported by the regular users of standard test methods. The procedures in this document are designed specifically for proficiency testing (PT) conducted on standard test methods, having a published reproducibility, for petroleum and petroleum-related products, which are presumed to b...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      2 pages
      French language

This document specifies a test method for inductively coupled plasma optical emission spectrometry (ICP-OES) for the detection of the sulfur content from 2 mg/kg to 21 mg/kg in fatty acid methyl esters (FAME). NOTE 1 For the purposes of this document, the term "% (m/m)" is used to represent the mass fraction (µ) of the material. NOTE 2 The method can also be used for the determination of concentrations outside the given limits. The precision statement, however, is only valid for the concentratio...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language

This document specifies the minimum requirements for mineral or synthetic based lubricants intended for use in all types of refrigerating compressors. NOTE This document can be read in conjunction with ISO 6743-3.

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      French language

This document addresses quality considerations that apply to marine fuels in view of the implementation of maximum 0,50 mass % S in 2020 and the range of marine fuels that will be placed on the market in response to the international statutory requirements to reduce exhaust gas emissions. It defines general requirements that apply to all 0,50 mass % sulfur (S) fuels and confirms the applicability of ISO 8217 for those fuels. It gives technical considerations which might apply to particular fuels...view more

    • sale 15% off
    • Technical specification
      12 pages
      English language
    • sale 15% off
    • Technical specification
      12 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      1 page
      French language

This document specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (m/m). This product range covers: — diesel fuels containing up to about 30 % (V/V) fatty acid methyl esters (FAME), — motor gasolines containing up to about 10 % (V/V) ethanol, — synthetic fuels such as hydrotreated vegetable oil (HVO) and gas to liquid (GT...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language

This document specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of the following products: — having sulfur contents in the range 3 mg/kg to 500 mg/kg, — motor gasolines containing up to 3,7 % (m/m) oxygen [including those blended with ethanol up to about 10 % (V/V)], — diesel fuels, including those containing up to about 30 % (V/V) fatty acid methyl ester (FAME), — having sulfur contents in the range of 3 mg/kg to 45 mg/kg, — synthetic fuels, such...view more

    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

This document specifies a method to determine the turbidity point of petroleum products based on distillates from crude oil. This document also specifies how to convert the turbidity point to an aniline point equivalent. This document describes a procedure using automated or automatic apparatus suitable for transparent samples with an initial boiling point above ambient temperature.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      French language

This document specifies a method for the determination of the boiling range distribution of petroleum products. The method is applicable to petroleum products and fractions with a final boiling point of 538 °C or lower at atmospheric pressure as determined by this document. This document does not apply to gasoline samples or gasoline components. The method is limited to products having a boiling range greater than 55 °C and having a vapour pressure sufficiently low to permit sampling at ambient ...view more

    • sale 15% off
    • Standard
      39 pages
      English language
    • sale 15% off
    • Standard
      44 pages
      French language

This document specifies the minimum requirements for mineral or synthetic based lubricants intended for use in reciprocating and drip feed rotary air compressors (vane compressors) with the compression chamber(s)/cylinders lubricated by direct lubricant injection. NOTE This document can be read in conjunction with ISO 6743-3[1].

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language

This document specifies a method to determine cloud point using a step-wise cooling technique that is executed by means of automated equipment types with optical detection mode. The method is applicable to distillate fuels, fatty-acid methyl esters (FAME) and paraffinic diesel fuels, including blends thereof, as well as those containing flow-improvers or other additives, intended for use in diesel engines and domestic heating installations. The method can be applied to other products such as veg...view more

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language

This document specifies a method for the determination of the pour point of petroleum products. A separate procedure suitable for the determination of the lower pour point of fuel oils, heavy lubricant base stock, and products containing residual fuel components is also described. The procedure described in this document is not suitable for crude oils. NOTE There is equipment available that uses an automated procedure similar to the one described in this document. However, the precision thereof ...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

This document specifies a method for the determination of the cloud point of petroleum products which are transparent in layers 40 mm in thickness and have a cloud point below 49 °C, amongst which are diesel fuels with up to 30 % (V/V) of fatty acid methyl ester (FAME)[2], paraffinic diesel fuels with up to 7 % (V/V) FAME[3], 100 % FAME[5] and lubricants. NOTE For the purposes of this document, the term "% (V/V)" is used to represent the volume fraction (φ) of a material.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      11 pages
      French language

This document specifies a laboratory method for the determination of the distillation characteristics of light and middle distillates derived from petroleum and related products of synthetic or biological origin with initial boiling points above 0 °C and end-points below approximately 400 °C, utilizing either manual or automated equipment. Light distillates are typically automotive engine petrol, automotive engine ethanol fuel blends with up to 85 % (V/V) ethanol, and aviation petrol. Middle dis...view more

    • sale 15% off
    • Standard
      40 pages
      English language
    • sale 15% off
    • Standard
      41 pages
      French language

This document specifies a method for measuring the quantity of oil separated from lubricating grease in the test conditions. It can be used to predict the behaviour of greases on storage in pails and drums. This method is not applicable to very soft greases that, during the test, flow unchanged through the sieve.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language

This document specifies a method for the determination of the dropping point of lubricating grease using an automatic apparatus.

    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      French language

This document specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which could contain a lubricity-enhancing additive. It defines two methods for measurement of the wear scar; Method "A" — Digital camera, and Method "B" — Visual observation. This test method applies to fuels used in diesel engines. NOTE It is not known if this test method will predict the performance of all additive/fuel combinati...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      French language

This document specifies a procedure for the calculation of the cetane index of middle-distillate fuels from petroleum-derived sources. The calculated value is termed the "cetane index by four-variable equation". Throughout the remaining text of this document, the term "cetane index" implies cetane index by four-variable equation. This document is applicable to fuels containing non-petroleum derivatives from tar sand and oil shale. It is not applicable to pure hydrocarbons, nor to distillate fuel...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      French language

This document describes the evaluation to determine the equivalency of test methods used on a global scale in quality specifications of petroleum products, lubricants, and fuels. This document focuses on whether the standardized test methods for determining density are to be considered technically equivalent. This is to guide laboratories that use one standard test method and wish to know if they can also certify product towards the others

    • sale 15% off
    • Technical report
      13 pages
      English language