ISO/TC 10/SC 10 - Process plant documentation

This document establishes rules for structuring of systems and the formulation of reference designations and provides classes for systems in the field of construction works and building services. This document also specifies a classification of objects and corresponding letter codes for use in reference designations of object occurences. This document is not intended for manufacturers or system-related designations of individuals (e.g. inventory number or serial number) or for product types (e.g. article number or parts number).

ISO 6412-1:2017 specifies rules and conventions for the execution of simplified drawings for the representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible). ISO 6412-1:2017 is used whenever it is necessary to represent pipes or pipelines in a simplified manner. For the purposes of this document, the figures illustrate the text only and should not be considered as design examples. NOTE This document can also be used for the representation of similar installations, such as ventilation or air-conditioning systems; in such cases, the term "duct", etc. is substituted for the term "pipe".

ISO 6412-2:2017 specifies supplementary rules, in addition to the general rules given in ISO 6412-1, applicable to isometric representation. Isometric representation is used where it is necessary to show the essential features clearly in three dimensions.

ISO 6412-3:2017 specifies simplified representations used in technical drawings for terminal features of ventilation and drains in pipeline systems.

ISO 14084-1:2015 specifies types of process diagrams for power plants and rules and guidelines for the preparation and representation of information in such diagrams.

ISO 15519-2:2015 provides rules and guidelines for representation of measurement, control, and actuation in diagrams for process industry.

ISO 14084-2:2015 specifies graphical symbols for process diagrams for power plants and guidelines for creation of new graphical symbol examples. ISO 14084-2:2015 is a collective application standard of the ISO 14617‑series. Graphical symbols for fluid power diagrams can be found in ISO 1219‑1. Graphical symbols for electrotechnical diagrams can be found in IEC 60617.

ISO/TS 81346-10:2015 contains sector-specific stipulations for structuring principles and reference designation rules on technical products and technical product documentation of power plants. It applies in combination with IEC 81346‑2, ISO/TS 81346‑3, VGB-B 101 and VGB-B 102 for the classification of systems and objects, and for function-, product- and location-specific designation of technical products and their documentation for power plants. It specifies the designation blocks for the clear identification and localization of the technical products, which are used for their labelling in the plant, for their designation in technical documents and for the designation of the technical documents as well. This Technical Specification encompasses the process of energy conversion. The specifications in this document apply for the power plant process, for the primary energy supply and final products distribution, as well as for auxiliary media and auxiliary energy supply, waste materials and waste energy disposal. This Technical Specification is not applicable to recovery of the primary energy and the media for supplying the process, nor to the processing of residues from process disposal (e.g. gypsum, slag products, waste water, etc.).

ISO 10628-1:2014 specifies the classification, content, and representation of flow diagrams. In addition, it lays down drafting rules for flow diagrams for chemical and petrochemical industry. ISO 10628 does not apply to electrical engineering diagrams. ISO 10628-1:2014 is a collective application standard of ISO 15519.

ISO 10628-2:2012 defines graphical symbols for the preparation of diagrams for the chemical and petrochemical industry. It is a collective application standard of the ISO 14617 series. ISO 10628-2:2012 does not apply to graphical symbols for electrotechnical diagrams; for these, see IEC 60617.

ISO 81714-1:2010 specifies basic rules for the design of graphical symbols for use in the technical documentation of products taking into account basic application needs.

ISO 15519-1:2010 provides general rules and guidelines for the preparation and presentation of information in diagrams for process industry.

ISO 14617-1:2005 serves as an introduction to all the other parts of ISO 14617. In particular, it gives information on the creation and use of registration numbers for identifying graphical symbols used in diagrams, rules for the presentation and application of these symbols, and examples of their use and application. It includes three indexes: an alphabetic index and an index of registration numbers -- both concerned uniquely with ISO 14617-2 to ISO 14617-12 -- and an index of cross-references to related items found in other International Standards.

ISO 14617-14:2004 specifies graphical symbols in diagrams for components and devices for material transport and handling.

ISO 14617-13:2004 specifies graphical symbols in diagrams for casting machines and machine tools.

ISO 14617-15:2002 specifies graphical symbols for use on installation diagrams (e.g. for buildings) and network maps, supplementing the symbols specified in ISO 14617-2 to ISO 14617-12. Symbols on such diagrams are used mainly to indicate the location and type of a component or device.

This part of ISO 14617 specifies graphical symbols for pumps, compressors and fans, used mainly for transportation, in diagrams.

This part of ISO 14617 specifies graphical symbols for components and devices used in measurement and control systems, represented in diagrams.

This part of ISO 14617 specifies graphical symbols for the representation of devices for separating, purification and mixing in diagrams.

This part of ISO 14617 specifies graphical symbols for measurement and control functions in diagrams, the same symbols in simple applications possibly representing instead components or devices implementing such functions.

This part of ISO 14617 specifies graphical symbols for functional connections, mechanical links, pipelines and related devices such as connection joints, ports, terminals, quick-release couplings and connectors, in diagrams.

This part of ISO 14617 specifies graphical symbols in diagrams for mechanical elements such as weights, springs, clutches and brakes, pipe and duct elements such as restrictors, nozzles and air vents, and devices for storage such as tanks, pressure vessels and gas bottles.

This part of ISO 14617 specifies graphical symbols of a general character, mainly for use in building-up complete symbols representing specific products and functions in diagrams.

This part of ISO 14617 specifies graphical symbols for basic elements in actuators, complete actuators and actuating devices in diagrams.

This part of ISO 14617 specifies graphical symbols for fluid power conversion units (such as pumps and motors) in diagrams.

This part of ISO 14617 specifies graphical symbols for valves and dampers in diagrams, including symbols for general-purpose valves, those used in fluid power systems and hygienic valves used in the food and pharmaceutical industries.

This part of ISO 14617 specifies graphical symbols for heat transfer and heat engines in diagrams.

The symbols in this part shall be considered a supplement to the symbols given in ISO 3511/1 and ISO 3511/2 and used in conjunction with them. The letter code for function identification shall be taken from table 1 of these two parts.The symbols are limited to identification on process flow diagrams, piping and instrument diagrams, etc. and do not provide means of illustrating specific instruments or parts thereof. The application methods are shown in the examples.

Forms and extension of part 1 which is limited to identification of instrument functions. Includes additional symbols and is intended for the communication of measurement and control fuctions among instrument specialists and other engineers involved in vessels, piping, layout design and operation. The definitions given in ISO 3511-1 apply equally to this part.Messen, Steuern, Regeln in der Verfahrenstechnik; Zeichen für die funktionelle Darstellung; Teil 2: Erweiterung der Grundforderungen

Forms one part of four and specifies symbols which show, by detailing the components, the external connections between units of equipment. These symbols are not intended to replace the graphic symbols contained in IEC Publication 117. the diagrams may employ single line or multi-line representation and be combined with, or replaced ty tables, provided clarity is maintained. For further assistance see IEC Puplication 113 Part 5, Preparation of interconnection diagrams and tables.

Forms one part of four which provide a universal means of communication between the various interests involved in the design, manufacture, installation and operation of measurement and control equipment used in the process industries. This part establishes a symbols system for use in depicting the basic functions. The system has been limited to the identification of instrument functions and does not provide means of illustrating specific instruments. The definitions are used solely for the purpose of application and understanding of the symbol system.

ISO/TS 81346-3 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signals and documents in accordance with the corresponding basic standards. The principles of ISO/TS 81346-3 apply to all technical fields for all industries and can be applied in all phases of the life cycle of a technical object. The designation of types, individuals, cost-centres, projects, etc. is not covered.

ISO/TS 16952-10:2008 contains sector-specific stipulations for structuring principles and reference designation rules on technical products and technical product documentation of power plants. It applies in combination with ISO/TS 16952-1, IEC/PAS 62400 and VGB B 101 for the classification of systems and objects, and for function-, product- and location-specific designation of technical products and their documentation for power plants. It specifies the designation blocks for the clear identification and localization of the technical products, which are used for their labelling in the plant, for their designation in technical documents and for the designation of the technical documents as well. ISO/TS 16952-10:2008 encompasses the process of energy conversion. The specifications in ISO/TS 16952-10:2008 apply for the power plant process, for the primary energy supply and final products distribution, as well as for auxiliary media and auxiliary energy supply, waste materials and waste energy disposal. ISO/TS 16952-10:2008 is not applicable to recovery of the primary energy and the media for supplying the process, nor to the processing of residues from process disposal (e.g. gypsum, slag products, waste water, etc.).

ISO/TS 16952-1:2006 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signals and documents in accordance with the corresponding basic standards. The principles of ISO/TS 16952-1:2006 apply to all technical fields for all industries and can be applied in all phases of the life cycle of a technical object. ISO/TS 16952-1:2006 serves as the basis for sector-specific parts of ISO/TS 16952 and thus forms the connecting element between them and the basic IEC 61346 series. The designation of types, individuals, cost-centres, projects, etc. is not covered by ISO/TS 16952-1:2006.

This part of ISO 14617 serves as an introduction to all the other parts. In particular, it gives information on the creation and use of registration numbers for identifying graphical symbols used in diagrams, rules for the presentation and application of these symbols, and examples of their use and application. It includes three indexes: an alphabetic index and an index of registration numbers, both concerned uniquely with ISO 14617-2 to ISO 14617-12, and an index of cross-references to related items found in other International Standards.

Gives simplified representations for 10 terminal features. The simplified representations may be combined with graphical symbols.

This part specifies supplementary rules, in addition to the general rules given in part 1, applicable to the isometric representation which shall be used where the essential features are to be shown clearly in three dimensions (for tenders, manufacturing and erection in pipeline construction as well as in machine construction and the construction industry). For the presentation of lettering (proportions and dimensions), see part 1. Annex A contains the bibliography and is for information only.

This part deals with rules common to orthogonal and isometric representation. Rules applicable only to isometric representation are given in part 2. All sorts of pipe materials (rigid and flexible) are covered. The figures only illustrate the text and should not be considered dessign examples Annex A contain the bibliography and is for information only.

Establishes basic symbols for conduits, pipes and ditches including fabricated parts and equipment. Symbols are shown and used primaily in plans, but they can in applicable cases also be used in sections, cuts and elevations. This part of ISO 4067 will be modified as soon as results are available from the work concerning the coordination of symbols for use in drawings in all technical areas.

Establishes basic symbols for drainage and water supply, space heating and cooling, and ducted air handling systems. They may be combined with designations specified in a description ora system of more detailed symbols based on these basic symbols. This part of ISO 4067 will be modified as soon as results are available from the work concerning the coordination of symbols for use in drawings in all technical areas.

The majority of symbols are shown in conjunction with their corresponding functional connection lines. The size of the symbols shall be related to the scale of the drawing. If a more detailed representation is required, symbols can be combined with designations indicated on the drawing or in a separate schedule. For representation on flow sheets for more advanced process systems, ISO 3511/1 is recommended.