ISO 368:2017 specifies the dimensions (length and inner diameter) and permissible total run-out tolerances of tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in the textile industry. It also specifies the dimensions and tolerances of the gauges for checking the tubes.

  • Standard
    6 pages
    English language
    sale 15% off

ISO 96-1:2016 specifies the principal dimensions of T- and SF-rings, and the mass and tolerance on the mass, of the appropriate travellers for flange rings employed on ring spinning and ring twisting machines. It also specifies the method of designation of the travellers.

  • Standard
    4 pages
    English language
    sale 15% off

ISO 18600:2015 defines terms of the card with a web-forming method using staple fibres for non-woven machinery.

  • Standard
    8 pages
    English language
    sale 15% off

ISO 18599:2015 specifies the dimensions and execution of strips for water nozzle solidification including their designation.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off

ISO 21485:2013 establishes a vocabulary of terms related to, and the principles of construction of, draw frames and their components, used for cotton spinning in the textile industry.

  • Standard
    7 pages
    English language
    sale 15% off

ISO 16853:2010 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans according to ISO 1101.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off

ISO 96-2:2009 specifies the principal dimensions of HZ- and J-rings, and the mass and tolerance on the mass, of the appropriate travellers for HZ- and J-rings employed on ring spinning and ring twisting machines. It also specifies the method of designation of the travellers.

  • Standard
    5 pages
    English language
    sale 15% off

ISO 28239:2008 establishes a vocabulary of terms related to, and the principles of construction of, openers and cleaners used in the textile industry in the preparation for spinning of cotton and other staple fibres.

  • Standard
    6 pages
    English language
    sale 15% off

ISO 26243:2007 specifies terms and definitions for the card with regard to spinning procedure for cotton and other staple fibres.

  • Standard
    9 pages
    English language
    sale 15% off

ISO 93-1:2006 specifies the main dimensions of cylindrical sliver cans used in the textile industry.

  • Standard
    8 pages
    English language
    sale 15% off

ISO 93-2:2006 specifies the principal features of spring bottoms -- with and without pre-tension -- for cylindrical sliver cans, as specified in ISO 93-1, used in the textile industry.

  • Standard
    8 pages
    English language
    sale 15% off

ISO 9903-1:2003 specifies the main dimensions for section wires for metallic card clothing with foot without interlocking or interchaining.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 9903-2:2003 specifies the main dimensions for section wires for metallic card clothing with interchaining foot.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

This International Standard specifies the main dimensions of coverings for ready-for-use top rollers (synthetic coverings). It is applicable to spinning preparatory and spinning machinery.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This International Standard specifies the dimensions, characteristics and designations of steel pins recommended for spinning preparatory and spinning machinery.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 4° 20 ' . Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Specifies the main dimensions, tolerances and designation of cones for cross winding for dyeing purposes with a half angle of cone 4° 20 ' . Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 5° 57 ' . Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Contains recommended types of cones (values of half angles, lengths and large inner diameters) used in the field of textile industry.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 3° 30 ' . Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Describes details for packaging and labelling of cotton bales.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Cancels and replaces the first edition (1984). Specifies the main dimensions, tolerances and designation of cylindrical tubes for tape yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Cancels and replaces the first edition (1982). Specifies the main dimensions of cylindrical tubes used in the field of textile machinery.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Cancels and replaces the first edition (1981). Specifies the main dimensions, tolerances and designation of cylindrical tubes for open-end spinning. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the main dimensions, tolerances and designation of cylindrical tubes of perforated tubes for cheese dyeing. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Intended to reduce the innumerable dimensions of cotton bales. Standardization of the dimensions of bales of man-made fibres might be the subject of a future International Standard. Lays down the nominal overall dimensions and the bale density of banded cotton bales. Applicable to the shaping and forming, the transport and opening of the bales. Not applicable to wrapping, banding, and marking of bales.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the spindle gauges for the machines named. The spindle gauge is the distance between the axes of two adjoining spindles. The sizes of spindle gauges are shown in a table. - Replaces the first edition (ISO 94-1972).

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

Specifies the numbering and the dimensions for the two types of card gauges currently used to set the distance between the working elements of cards. Dimensions of gauges, typ A are shown in table 1, numbering and thickness of the gauges are contained in table 2. - Replaces the first edition (ISO 2572-1974)

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

Figure 1a shows a flyer bobbin of the type with shoulder, figure 1b gives a flyer bobbin of the type without shoulder. Table 1 contains the main dimensions and tolerances of bobbins with shoulder, table 2 those of bobbins without shoulder. - Replaces ISO Recommendations R 344/1-1963 and R 344/2-1969 and constitutes its technical revision.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Lays down the dimensions, shapes and sections of wires for flexible card clothings. A table comprises values for card wire size and for card wire section (for example, round, biconvex and so on).

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Defines left and right sides of single-sided machines, double-sided machines with lateral driving unit and double-sided machines with centre driving unit.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

To determine the side of a spinning machine with flow of the material in one single direction, the observer looks against this flow. Examples: Blowroom machines, cards, crawing frames and fly frames. Definitions of the side of a spinning machine with flow of the material in various directions and of a double-sided spinning machine are given in detail.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

ISO 96-1:2009 specifies the principal dimensions of T- and SF-rings, and the mass and tolerance on the mass, of the appropriate travellers for flange rings employed on ring spinning and ring twisting machines. It also specifies the designation method for the travellers.

  • Standard
    4 pages
    English language
    sale 15% off

ISO 21485:2006 establishes a vocabulary of terms related to, and the principles of construction for, draw frames and their components, used for cotton spinning in the textile industry.

  • Standard
    10 pages
    English language
    sale 15% off

ISO 368:2006 specifies the dimensions (length and inner diameter) and permissible total run-out of tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in the textile industry. It also specifies the dimensions and tolerances of the gauges for checking the tubes.

  • Standard
    6 pages
    English language
    sale 15% off

ISO 16853:2003 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Cancels and replaces the first edition (1989). Specifies the main dimensions, tolerances and designation of cylindrical tubes for textured yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Gives the main dimensions, tolerances and designation of cylindrical tubes for gross-wound packages in winding and twisting. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Gives the main dimensions, tolerances and designation of cylindrical tubes for continuous spin-drawn synthetic filament yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the overall dimensions of banded bales of man-made staple fibres. These dimensions allow for an optimum utilisation of the loading space of freight containers and trucks.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

Specifies the principal dimensions of HZCH-, HZ- and J-rings, the mass, the tolerance on the mass, wire section, range of numbers of the appropriate travellers for these rings. Includes the designation method for the travellers.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

Specifies the principal dimensions of T-rings, the mass, the tolerance on the mass, wire section, range of numbers of the appropriate travellers for these rings. Includes the designation method for the travellers.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

Specifies the dimensions, tolerances, hardness and designation of three types of wires.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Specifies the dimensions (length and inner diameter) and permissible total run-out of tubes as well as the dimensions and tolerances of the gauges for checking the tubes. This third edition cancels and replaces the second edition (1982).

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off