This document describes procedures for the determination of the angle resolved scattering by optical components such as coated or uncoated optical elements, photonic structures, and materials that can be transparent, translucent, or opaque. It comprises scattering into the scattering sphere around the specimen usually separated into the backward and forward hemispheres. The procedures apply to wavelengths of radiation ranging from 5 nm in the extreme ultraviolet to 15 µm in the infrared spectral...view more

    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Draft
      15 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      French language
    • sale 15% off
    • Draft
      13 pages
      English language

This document specifies a method of testing the laser-induced ignition and damage of medical beam delivery systems to allow checking of suitable products according to the classification system. NOTE 1 Take care when interpreting these results, since the direct applicability of the results of this test method to the clinical situation has not been fully established. NOTE 2 Users of products tested by this method are cautioned that the laser will be wavelength sensitive and tested at the wavelengt...view more

    • sale 15% off
    • Standard
      18 pages
      English language
    • sale 15% off
    • Draft
      18 pages
      English language
    • sale 15% off
    • Draft
      18 pages
      English language

This document applies to rigid endoscopes designed for use in the practice of medicine. Endoscopes having a fibre-optic or opto-electronic imaging system are excluded. It specifies a test method for determining the optical resolution of endoscopes. This document provides a measurement method for characterizing three aspects of the optical resolution of a rigid endoscope. Characteristic A is used to provide a simple measurement of the limiting resolution of the endoscope image. Characteristic B p...view more

    • sale 15% off
    • Draft
      19 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      English language
    • sale 15% off
    • Draft
      20 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      French language
    • sale 15% off
    • Draft
      4 pages
      English language

This document specifies particular requirements for the biocompatibility evaluation of materials for intraocular lenses (IOLs) including the processing conditions to produce them. These requirements include evaluation of physicochemical properties that are relevant to biocompatibility. It also gives guidance on conducting an ocular implantation test.

    • sale 15% off
    • Standard
      27 pages
      English language
    • sale 15% off
    • Standard
      28 pages
      French language
    • sale 15% off
    • Draft
      27 pages
      English language
    • sale 15% off
    • Draft
      29 pages
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Draft
      1 page
      English language

This document defines terms for endoscopes and endotherapy devices commonly used in the endoscopic area. This document does not define general medical terms or other general terms. This document does not define terms that should be defined in other ISO 8600 (all parts).

    • sale 15% off
    • Standard
      25 pages
      English language
    • sale 15% off
    • Draft
      33 pages
      English language

This document specifies terms and definitions to be used in the field of light microscopy and advanced techniques in light microscopy.

    • sale 15% off
    • Standard
      63 pages
      English language
    • sale 15% off
    • Draft
      63 pages
      English language

This document specifies the design, testing and labelling of trocar sleeves and trocar pins that are universally interchangeable and reusable. It also specifies the design, testing and labelling of endotherapy devices which are inserted through these trocar sleeves and are also universally interchangeable and reuseable. This document specifies the minimum requirements for the production of the products mentioned.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language

This document specifies the measuring method for the refractive index of optical glasses with the accuracy within 1 × 10−5 used in the spectral range from 365 nm to 2 400 nm. Additional information on how to apply the refractive index in the dispersion and the various dispersion formulae of optical glasses is given in Annex A and Annex B.

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Draft
      21 pages
      English language

This document applies to ocular endotamponades (OE), a group of non-solid surgically invasive medical devices introduced into the vitreous cavity of the eye to flatten and position a detached retina onto the retinal pigment epithelium (RPE), or to tamponade the retina. With regard to the safety and efficacy of OE, this document specifies requirements for their intended performance, design attributes, pre-clinical and clinical evaluation, sterilization, product packaging, product labelling and th...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      18 pages
      French language

This document specifies the most important requirements of telescopic tripods for surveying instruments and the connection between instrument and tripod. The requirements in this document enable instruments and tripods of different manufacturers to be joined to one another, without prejudicing their performance and their usefulness. This document is applicable to tripods which are used for levels, theodolites, tacheometers, GPS equipment, EDM instruments and in combination with targets, reflecto...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies a measuring system for spectacle frames and related vocabulary. It is applicable to spectacle frames with fronts that are intended to be symmetrical.

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Draft
      16 pages
      English language

This document specifies fundamental requirements for non-invasive, active and non-active ophthalmic instruments and to devices for enhancing low vision. This document is also applicable to tonometers, but not to other ophthalmic instruments which are used in contact with the globe of the eye. This document is not applicable to operation microscopes, endoscopes and devices intended for laser investigation or laser treatment of the eye.

    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language

This document specifies the test method for climate resistance of optical glass and the classification of the optical glass according to the test results.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

This document specifies calcium fluoride used in the infrared spectral range from 0,78 µm to 10 µm. The material specified in this document can also transmit light in other spectral domains (ultraviolet and visible).

    • sale 15% off
    • Standard
      5 pages
      English language

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825). Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013. This document is applicable to machines using laser radiation to process materi...view more

    • sale 15% off
    • Standard
      23 pages
      French language
    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Standard
      1 page
      English language

This document specifies a method of testing telescopes in terms of imaging states aimed at making valid optical transfer function (OTF) measurements. This document includes two annexes (Annex A and B) that provide information on the more recent techniques for measuring optical transfer function and methods of deriving image quality criteria from such measurements.

    • sale 15% off
    • Standard
      17 pages
      English language

This document defines the basic terms for diffractive optical elements for free space propagation. The purpose of this document is to provide an agreed-upon common terminology that reduces ambiguity and misunderstanding and thereby aid in the development of the field of diffractive optics.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      French language

This document specifies commonly used quantities regarding image performance in confocal laser scanning microscopy used for imaging of fluorescent biological specimens. This document applies only to confocal single point scanners using single photon excitation.

    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      15 pages
      English language

This document specifies measurands and measurement procedures of colour properties for bright field microscopy with transmitted light illumination. These measurements are defined in image planes or intermediate image planes. This document also specifies how the information is provided to the user.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Standard
      1 page
      English language

This document specifies rules for presentation of aspheric surfaces and surfaces with low order symmetry such as cylinders and toroids in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. It also specifies sign conventions and coordinate systems. This document does not apply to off-axis aspheric and discontinuous surfaces such as Fresnel surfaces or gratings. NOTE For off-axis aspheric and non-symmetric surfaces, see ISO 10110-19. This document does n...view more

    • sale 15% off
    • Standard
      26 pages
      French language
    • sale 15% off
    • Standard
      26 pages
      English language

This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of poli...view more

    • sale 15% off
    • Standard
      24 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language

This document specifies procedures and techniques for obtaining comparable values for the absorptance of optical laser components.

    • sale 15% off
    • Standard
      17 pages
      French language
    • sale 15% off
    • Standard
      16 pages
      English language

This document specifies the general layout of drawings and provides examples of indications in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document specifies the presentation in drawings of the characteristics, including the tolerances, of optical elements and systems. This document also includes the popular tabular format, formerly presented in ISO 10110‑10. This tabular format, now described in 5.1, is the preferred format for ISO 10110 d...view more

    • sale 15% off
    • Standard
      46 pages
      French language
    • sale 15% off
    • Standard
      45 pages
      English language
    • sale 15% off
    • Standard
      45 pages
      English language

This document specifies the test method for the determination of the deviation from a flat image surface, i.e. the sagittal and tangential field curvature of telescopic systems and observational telescopic instruments.

    • sale 15% off
    • Standard
      5 pages
      English language

This document describes the most commonly used test methods considered in standardization work relating to scratch and abrasion resistance of plastic spectacle lenses along with their technical capacities and limitations. It includes the ISO test method for assessment of claims for basic abrasion resistance in ISO 8980-5. This document is intended to be of benefit to any future interest in ISO standardization on scratch and abrasion resistance of spectacle lenses.

    • sale 15% off
    • Technical report
      21 pages
      French language
    • sale 15% off
    • Technical report
      19 pages
      English language

This document applies to endoscopes designed for use in the practice of medicine. It specifies measurement requirements and describes two test methods for measuring the field of view and direction of view of endoscopes. Method A uses the distance from the distal window to calculate the field of view. Method B uses the distance from the entrance pupil. Other test methods can be used if they obtain equivalent results.

    • sale 15% off
    • Standard
      8 pages
      English language

This document gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates.

    • sale 15% off
    • Technical report
      64 pages
      French language
    • sale 15% off
    • Technical report
      63 pages
      English language

This document defines terms for microlens arrays. It applies to arrays of very small lenses formed inside or on one or more surfaces of a common substrate. This document also applies to systems of microlens arrays.

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language

This document specifies general optical test methods for the measurement of the relative irradiance in the image field. This document is applicable to optical imaging systems in the optical spectral region from λ = 100 nm to λ = 1 μm. Theoretical reflections and the comparison with the calculation apply only to optical systems. This document is applicable to rotationally invariant and rotationally variant systems; anamorphic systems, for example, are included. Telescopic systems are also include...view more

    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

This document specifies procedures for determining the spectroscopic forward scattering characteristics of coated and uncoated optical surfaces over a specified wavelength range between 350 nm and 850 nm using a double-beam spectrophotometer with an integrating sphere. This document is also applicable to the forward scattering properties at a single wavelength. This document is applicable to spectroscopic forward scattering measurements with collection angles larger than 2,7 degrees. ISO 13696 p...view more

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language

This document specifies optically and mechanically related dimensions for imaging components of a microscope such as a) the dimensions related to objective, eyepiece and tube lens, b) the dimensions of screw thread types for connecting a microscope objective to the nosepiece, and c) the diameters of interchangeable eyepieces and corresponding viewing tubes of microscopes.

    • sale 15% off
    • Standard
      14 pages
      English language

This document defines terms relating to ophthalmic optics, specifically to blanks, finished spectacle lenses and fitting purposes. Terms relating to processes and material for fabrication and surface treatment (other than some specific terms relating to coatings), and terms relating to defects in materials and after optical processing are given in ISO 9802.

    • sale 15% off
    • Standard
      66 pages
      English language
    • sale 15% off
    • Standard
      66 pages
      French language

This document specifies minimum requirements for the optical functions and especially for the laser power handling capability as well as for the resistance against mechanical, chemical and climatic stress of optical coatings. This document applies to optical coatings that are used in laser optics. Thereby the user is able to rely on defined numerical data while the manufacturer of thin films has the choice for the materials and production method.

    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language

This document specifies the indication of tolerances for four categories of imperfections within optical materials — stress birefringence, bubbles and inclusions, homogeneity, and striae — in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Tolerances are applied either to a finished optical part, a finished system of optical parts, or to the raw material used to manufacture an optical part.

    • sale 15% off
    • Standard
      23 pages
      French language
    • sale 15% off
    • Standard
      22 pages
      English language

This document gives rules for the specification of raw optical glass. It serves as a complement to the ISO 10110 series, which provides rules specifying finished optical elements. Since raw optical glass can be quite different in shape and size from the optical elements, its specification also differs from that of optical elements. This document provides guidelines for the essential specification characteristics of raw optical glass in order to improve communication between glass suppliers and o...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      22 pages
      French language

This document specifies field procedures for determining and evaluating the precision (repeatability) of terrestrial laser scanners and their ancillary equipment when used in building, civil engineering and surveying measurements. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand, and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that...view more

    • sale 15% off
    • Standard
      43 pages
      English language

This document defines terms applicable to intraocular lenses, and to the methods used to evaluate them. NOTE Terms are listed in the alphabetical order of the English terms in the English version of this document.

    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Standard
      10 pages
      English language

This document specifies minimum requirements for the optical effects and the mechanical, chemical and environmental properties of antireflecting coatings. This document applies to antireflecting coatings for optical applications. Thereby the user is able to rely on defined numerical data while the manufacturer of thin films has the choice for the materials and production method.

    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Standard
      6 pages
      English language

This document specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the characterization of the spatial properties of laser power (energy)density distribution functions at a given plane. The methods given in this document are intended to be used for the testing and characterization of both continuous wave (cw) and pulsed laser beams used in optics and optical instruments. This document provides definitions of terms and symbols to be ...view more

    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Standard
      16 pages
      English language

This document defines basic terms, symbols, and units of measurement for the field of laser technology in order to unify the terminology and to arrive at clear definitions and reproducible tests of beam parameters and laser-oriented product properties. NOTE The laser hierarchical vocabulary laid down in this document differs from that given in IEC 60825?1. ISO and IEC have discussed this difference and agree that it reflects the different purposes for which the two standards serve. For more deta...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      French language

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefron...view more

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

This document specifies minimum requirements on the optical effects and the mechanical, chemical and environmental properties of reflecting metal coatings. This document applies to reflecting metal coatings based on aluminium or silver for optical applications. Thereby the user is able to rely on defined numerical data while the manufacturer of thin films has the choice for the materials and production method.

    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Standard
      6 pages
      English language

This document defines terms relevant to optical coatings. These terms are grouped in four classes: Terms and definitions, definition of coatings by function, definitions of common coating imperfections and other definitions. This document identifies surface treatments of components and substrates excluding ophthalmic optics (spectacles) by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement met...view more

    • sale 15% off
    • Standard
      19 pages
      English language
    • sale 15% off
    • Standard
      20 pages
      French language

This document describes visible solar radiation with wavelengths close to the UV range, its transmission to, within and the effects on the human eye. The wavelengths concerned are from 380 nm to 500 nm, covering the colours of violet, indigo and blue — often referred to as the "blue wavelengths". It also explains the filtering effects and measurement of spectacle lenses and sunglasses, thereby providing background information to understand the transmittance requirements related to filtering effe...view more

    • sale 15% off
    • Technical report
      27 pages
      English language
    • sale 15% off
    • Technical report
      29 pages
      French language

This document specifies a method of testing the continuous wave (cw) laser resistance of the shaft of a tracheal tube and the cuff regions including the inflation system of tracheal tubes designed to resist ignition by a laser. NOTE 1 When interpreting these results, the attention of the user is drawn to the fact that the direct applicability of the results of this test method to the clinical situation has not been fully established. NOTE 2 The attention of the users of products tested by this m...view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      English language

This document specifies minimum requirements on the optical effects and the mechanical, chemical and environmental properties of neutral beam splitter coatings. This document applies to neutral beam splitter coatings for optical applications. Thereby the user is able to rely on defined numerical data while the manufacturer of thin films has the choice for the materials and production method.

    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      English language