This document specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this document, the term “metals” refers to pure metals and alloys.
The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environme...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies protection criteria for determining the AC corrosion risk of cathodically protected pipelines.
It is applicable to buried cathodically protected pipelines that are influenced by AC traction systems and/or AC power lines.
In the presence of AC interference, the protection criteria given in ISO 15589-1 are not sufficient to demonstrate that the steel is being protected against corrosion.
This document provides limits, measurement procedures, mitigation measures, and info...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This document specifies a procedure for carrying out impressed current electrochemical chloride extraction from chloride bearing concrete in existing structures. It is applicable to atmospherically exposed parts of structures with ordinary reinforcement and/or post-tensioned tendon ducts embedded in concrete. In the latter case, it is essential to verify that there is no risk of hydrogen embrittlement, if necessary by conducting trials and installing monitoring during the treatment.
This docume...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies a method of determining the mass per unit area of hot dip galvanized coatings
on ferrous materials.
Since an exact knowledge of the area of the surface is essential, this document is mainly applicable to
shapes whose areas are easy to determine. If, with heavy samples, the specifications of Clause 7 cannot
be met, then the hot dip galvanized coating mass is determined by another method.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document gives guidelines for the selection of procedures that can be used in the identification
and examination of corrosion pits and in the evaluation of pitting corrosion and pit growth rate.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for determining corrosion rates with standard specimens of metals
in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different
sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc,
steel and lead. The values obtained from the measurements are used as classification criteria for the
determination of indoor atmospheric corrosivity.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies the procedure for the determination of coating strength, and hence of cohesive strength in a tubular coating tensile test.
The test is intended to determine the tensile coating strength parallel to the spray layers (normal to the spray direction) and to identify differences in particle bond quality.
The tubular coating tensile test is suitable for sprayed coatings deposited using metallic materials (not carbides and ceramics).
The tubular coating tensile test is not su...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document establishes a classification of low corrosivity of indoor atmospheres.
It specifies the reference metals for which a corrosion attack after a defined exposure period is used for
determining corrosivity categories of indoor atmospheres of low corrosivity.
It defines corrosivity categories of indoor atmospheres according to corrosion attack on standard
specimens.
It indicates important parameters of indoor atmospheres that can serve as a basis for an estimation of
indoor corros...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This document specifies procedures for designing, preparing and using reversed U-bend (RUB) test
specimens for investigating the susceptibility of the metal to stress corrosion cracking. The term
“metal” as used in this document includes alloys.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

EN-ISO 8289-1 specifies two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings.Method A (electrical) is applicable to the rapid detection and determination of the general location of defects. Method B (optical), based on colour effects, is applicable to the more precise detection of defects and their exact locations. Both methods are commonly applied to flat surfaces. For more intricate shapes, such as undulated and/or co...view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and recommendations for cathodic protection systems applied to the internal surfaces of metallic tanks, structures, equipment, and piping containing raw or treated seawater or brackish waters, to provide an efficient protection from corrosion.
Cathodic protection inside fresh water systems is excluded from this document. This is covered by EN 12499.
NOTE   EN 12499 covers internal cathodic protection for any kind of waters, including general aspects for s...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

EN-ISO 8044 defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations.

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for measuring the environmental parameters used to classify the corrosivity of indoor atmospheres on metals and alloys.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document gives guidelines and recommendations for the general principles ofdesign appropriate to articles to be hot dip galvanized after fabrication (e.g.in accordance with ISO 1461) for the corrosion protection of, for example,articles that have been manufactured in accordance with EN 1090-2. This documentdoes not apply to hot dip galvanized coatings applied to continuous wire orsheet (e.g. to EN 10346).

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the general principles for the implementation of a system of cathodic protection against corrosive attacks on buried or immersed metal structures with and without the influence of external electrical sources.

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness of non-magnetic metallic coatings on metallic and non-metallic basis materials such as: a) zinc, cadmium, copper, tin or chromium on steel; b) copper or silver on composite materials. The phase-sensitive method can be applied without thickness errors to smaller surface areas and to stronger surface curvatures than the amplitude-sensitive eddy-current method specif...view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

This document specifies the quality requirements for apparatus, components, appliances and accessories of glass-lined steel (including semi-crystallized enamel coatings) and glass-lined steel castings used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the actions to be taken to repair defects. It is also applicable to glass-lined pumps, pump components and fittings. It does not apply to glass-lined flanged steel pipes or ...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in regenerative heat exchangers, before and after packing in baskets. For very severe service conditions, or to obtain extended operational life, more stringent limits can be agreed between cu...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This standard specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) which occur in enamel coatings of corrugated and/or undulated profiles and which extend down to the metal base.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for product quality and product testing of enamelled valves
and pressure pipe fittings for untreated and potable water supply.
It does not apply to chemical service glass-enamel and apparatus enamel.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the protection of iron and steel surfaces against corrosion by
applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.
In this document, requirements for the planning of the corrosion protection system and for the
constructive design of the component to be protected are specified, where thermal spraying is intended
to be the process for the deposition of the metallic corrosion protection.
Some field-related basic terms are defi...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document gives guidelines for determining the average surface density over a measured area
of anodic oxide or of a coating deposited autocatalytically, mechanically, by chemical conversion,
by electrodeposition, by hot dip galvanizing and by chemical or physical vapour deposition using
gravimetric and other chemical analysis procedures that have attained some degree of national or
international standardization.
A variety of procedures are described and include:
— gravimetric procedure...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for electroplated coatings of metallic chromium, with or without
undercoats, on ferrous and non-ferrous metals for engineering purposes. The coating designation
provides a means of specifying the thickness of chromium appropriate for typical engineering
applications.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a quantitative method for the measurement of adhesion of metallic and related inorganic coatings applied to metallic surfaces.  Typical coatings for which this European Standard applies are copper, nickel, nickel plus chromium, silver, tin, tin-nickel alloys, zinc, gold.  This European Standard does not apply to certain hot dip and spray coatings.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document specifies procedures for designing, preparing and using precracked specimens for
investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation
and use of precracked specimens for investigating susceptibility to stress corrosion. Recommendations
concerning notched specimens are given in Annex A.
The term “metal” as used in this document includes alloys.
Because of the need to confine plasticity at the crack tip, precracked specimens are ...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

The thermal spray procedure specification (TSPS) is a critically important quality assurance document in the production workflow when producing a thermally sprayed coating.
This European standard defines the minimum requirements that should be followed for the content of a thermal spray procedure specification. When applying the thermal spray procedure specification, the requirements of the coating specification should be met. To ensure traceability, the thermal spray procedure specification sh...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 4531 specifies a simulating method of test for determination of the release of metal-ions from enamelled ware, which are intended to come into contact with food (including drinks).
ISO 4531 also specifies permissible limits for the release of metal-ions from enamelled ware, which are intended to come into contact with food (including drinks).
ISO 4531 is applicable to enamelled ware, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage ...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This international Standard specifies a method for the determination of resistance to stress corrosion cracking (SCC) of magnesium alloys. This International Standard covers the method of sampling, the types of specimens, the loading procedure, the type of environment and the Interpretation of results.
This International Standard is aimed at the determination of the resistance to SCC as a function of the chemical composition, the method of manufacture and heat treatment of magnesium alloys. This...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the processing of surface preparation for thermal spraying. Important principles indicated in this European Standard should be taken into consideration when surfaces of metallic parts are to be prepared for thermal spraying. This European Standard applies for production of new parts as well as for the repair of worn parts.
This European Standard does not apply for thermal spraying in the case of protection against atmospheric corrosion by coatings of zinc and/or...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European standard defines the requirements to be specified in the coating specification for a thermally sprayed coating. It applies to components and workpieces made of metallic or non-metallic materials that are to be partially or completely coated with thermally sprayed coatings. The coating may be made of metals, metal ceramics, oxide ceramics or plastics. Additional requirements for the coating manufacturer that are not coating-specific should be included by defining the technical suppl...view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the acceptance inspection of thermal spraying equipment, in this case the pressurized part only for low pressure and controlled atmosphere plasma spraying, used in spray jobs to produce thermally sprayed coatings of reproducible quality.
This part should be used in conjunction with EN 1395-1, which includes general requirements and explanations of procedures.
The plasma spraying system itself should be acceptance inspected according to EN 1395-...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies two accelerated corrosion-test procedures, Methods A and B, for the
comparative evaluation of metallic materials with or without permanent corrosion protection or
temporary corrosion protection in outdoor salt and/or acid rain environments. It also specifies the
apparatus used. The two tests involve cyclic exposure of the specimens to acidified salt spray, “dry” and
“wet” conditions.
The particular advantages of the two tests over conventional accelerated tests, such...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies procedural instructions for qualification testing of thermal sprayers. It defines
requirements, ranges of qualification, test conditions, acceptance requirements and certification for
qualification testing of thermal spray performance.
This document is applicable when the thermal sprayer’s qualification is required by this document, the
purchaser, by inspection authorities or by other organizations.
The thermal spraying processes referred to in this document include ...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for electroplated coatings of zinc with supplementary treatments
on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the
requirements for heat treatment before and after electroplating.
It is not applicable to zinc coatings applied
— to sheet, strip or wire in the non-fabricated form,
— to close-coiled springs, or
— for purposes other than protective or decorative.
This document does not specify requireme...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This document specifies methods of checking the adhesion of electrodeposited and chemically
deposited coatings. It is limited to tests of a qualitative nature.
This document does not describe certain tests that have been developed at various times to give a
quantitative measure of adhesion of metallic coating to a substrate, since such tests require special
apparatus and considerable skill in their performance which renders them unsuitable as quality control
tests for production parts. Some...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for assessing the corrosion resistance of metals by an alternate
immersion test in salt solution, with or without applied stress.
The test is particularly suitable for quality control during the manufacture of metals including
aluminium alloys and ferrous materials, and also for assessment purposes during alloy development.
Depending upon the chemical composition of the test solution, the test can be used to simulate the
corrosive effects of marine splash zo...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document describes a test method for the determination of the resistance of vitreous and porcelain
enamelled articles to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus
used is a hexagonal vessel in which six enamelled specimens or a tetragonal glass bottle in which four
enamelled specimens are simultaneously tested.
NOTE 1 The resistance to any alkaline liquid can be determined. However, the test method was originally used
for the determination of the...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies a test procedure to determine the deposition efficiency for thermal spraying.
It provides a reliable comparison method between different spray processes and different feed stock.
It is applicable for all thermal spray processes (see ISO 14917) and all wire, rod, cord and powder spray
materials.
It is applicable when data concerning the deposition efficiency of a spray process in connection with a
defined spray material are required.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies the technical requirements of metallic and other inorganic coatings in order to
develop consistent technical standards and establishes a standard format for designating the coatings.
It applies to International Standards for electrodeposited, autocatalytic and vapour-deposited coatings.
Detailed technical requirements for individual coatings are not given in this document, but can be
found in the International Standards listed in the Bibliography.
This document does ...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This standard applies to electrodeposited zinc and zinc-alloy coatings on iron and steel with Cr(VI)-free passivation. The
zinc-alloy coatings contain nickel or iron as alloying agents (referred to as zinc/nickel and zinc/iron coatings, respectively).
The main purpose of the coatings or coating systems is protecting iron and steel components against corrosion.
The standard prescribes the designations to be used for the above coating systems and specifies minimum corrosion
resistances to be achie...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies a process for the confirmation of requirements for phosphate coatings which
are usually destined for application on ferrous materials, zinc, cadmium and their alloys (see Annex B).

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for corrosion protection of steel structures, components or
parts, which are coated by thermal spraying of zinc, aluminium or their alloys.
This document specifies requirements for coating manufacturers of surface preparation, thermal
spraying, testing and post treatments, e.g. sealing of the coating. This document applies to metallic
corrosion protection coatings in the case of new fabrication in the workshop, as well as on-site and for
repair on-site a...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This standard specifies the procedures for the preparation of enamel samples for measurement of the thermal dilatation and calculation of the thermal expansion coefficient.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for non-destructive measurements of the thickness of non-conductive
coatings on non-magnetic electrically conductive base metals, using amplitude-sensitive eddy-current
instruments.
In this document, the term “coating” is used for materials such as, for example, paints and varnishes,
electroplated coatings, enamel coatings, plastic coatings, claddings and powder coatings. This method
is particularly applicable to measurements of the thickness of most oxide c...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements of electroplated coatings of cadmium with supplementary
treatments on iron and steel. It includes information that is to be supplied by the purchaser to the
electroplater, and describes coating requirements, including those for heat treatment before and after
electroplating.
It is not applicable to coatings applied
— to sheet, strip or wire in the non-fabricated form,
— to close-coiled springs, or
— for purposes other than protective, intrinsic lub...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

ISO 15589-1:2015 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in ISO 13623 or EN 14161 for the petroleum, petrochemical, and natural gas industries, and in EN 1594 or EN 12007‑1 and EN 12007‑3 used by gas supply industries in Europe.
All contents of this part of ISO 15589 are applicable to on-land...
view more

    • sale 10% off
    • Standard
      90 pages
      English language
    • e-Library read for
      1 day

This document provides guidelines and recommendations regarding the general principles of
design which are appropriate for articles to be zinc coated for corrosion protection and the level of
corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of
environments. Initial protection is covered in relation to
— available standard processes,
— design considerations, and
— environments for use.
This document applies to zinc coatings applied by t...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document provides guidelines and recommendations regarding the general principles of design
that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of
application of the coating, the design of the article and the specific environment to which the article is
exposed. The sherardized article can be further protected by application of additional coatings (outside
the scope o...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This International Standard defines five levels of competence for persons acting in the field of cathodic protection, including survey, design, installation, testing and maintenance. It specifies a framework for establishing these competence levels and their minimum requirements.
Competence levels apply to each of the following application sectors:
- on-land metallic structures;
- marine metallic structures;
-  reinforced concrete structures;
- inner surfaces of metallic container structures.
...
view more

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

These Standards cover powders which are currently applicable in thermal spraying.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day