This International Standard specifies the requirements and test methods for their verification for inspection in use for aerial fixed wing and rotary aircraft spray systems for agriculture, horticulture forestry and human health, with respect to minimizing the risk of environmental.
This part of ISO 16122 relates mainly to the condition of the equipment with respect to its potential risk for the environment and its performance to achieve good applications.
NOTE: Requirements for the protection...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

ISO 789-1:2018 specifies test procedures for determining the power available at the power take-off (PTO) on agricultural tractors of the wheeled, track-laying or semi-track-laying type.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      9 pages
      English language

This document specifies safety requirements for, and clearance zones around, front-mounted power take-offs (PTO) on agricultural tractors.
NOTE 1 Further specifications for front-mounted power take-offs are given in ISO 8759-3.
It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or the rear.
NOTE 2 In this case, ISO 500 (all parts) apply.

    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      5 pages
      English language

ISO 789-9:2018 specifies test procedures for determining the power available at the drawbar on agricultural tractors of the wheeled, track-laying or semi-track-laying type.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      11 pages
      English language

This document, to be used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of mounted, semi-mounted, trailed and self-propelled
agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provid...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies safety requirements and their verification for design and construction of transportable, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components and by separat...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      64 pages
      English language
    • e-Library read for
      1 day

2019-11-12 JF TC is reviewing editorially the Annex ZA and is preparing the information on significant changes to be put in the Foreword

    • sale 10% off
    • Amendment
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      18 pages
      English language
    • e-Library read for
      1 day

This document applies to wheeled and track-laying self-propelled agricultural and forestry vehicles. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this standard:
•   Coupling force control
•   Endurance braking systems
•   Anti-Lock Braking Systems and EBS
•   Vacuum braking systems
•   Safety related parts of compl...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking self-propelled machinery (or tractor) to the first fixed bearing of recipient machinery, by describing methods for the elimination or reduction of risks which need specific requirements. This standard concerns only the PTO drive shafts and those guards which are mechanically linked to the PTO drive shaft by at least two bearings...view more

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      32 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of trailers with a tipping body, balanced or semi-mounted, used in agriculture, as defined in 3.1. It includes also hook-lift trailers and trailers with conveyor device as defined in 3.9.
This European Standard does not deal with trailers equipped with pick-up devices and/or rear spreading devices.
Trailers with a load push/push-off device, slats or alternating moving floor may be remove...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This document specifies safety requirements and measures for the verification of the design and
construction of hand-held, integrally-driven combustion engine hedge trimmers (hereafter referred to
as “hedge trimmers”) designed to be used by a single operator for trimming hedges and bushes while
utilizing one or more linear reciprocating cutter blades.
This document is also applicable to ”split-boom” type hedge trimmers and to multi-purpose machines
when configured as a hedge trimmer.
It es...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This part of ISO 25119 provides general principles for the production, operation, modification and supporting processes of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
   aircraft and air-cushion vehicles used in agri...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This standard specifies specific safety requirements and their verification for the design and construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This part of ISO 25119 provides general principles for the series development, hardware and software of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It may also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
   aircraft and air-cushion vehicles used in agriculture,
   lawn and...
view more

    • sale 10% off
    • Standard
      70 pages
      English language
    • e-Library read for
      1 day

This part of ISO 25119 sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It may also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
•   aircraft and air-cushion vehicles used in agriculture,
•   lawn and garden equipment.
...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This part of ISO xxx is applicable to tractors, self-propelled ride-on machines, and mounted / semi-mounted or trailed machines used in agriculture that do not require an onboard operator for primary machine control.
The standard will specify general requirements that relate to the protection and safety of the machine operator, by-standers, and service personnel.
This standard will define requirements that can apply to machine functional safety and the components of highly automated agricultural...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the additional requirements in respect to radio remote control systems that are used in forestry machinery. The fundamental requirements are defined in the standard IEC 62745. Radio remote control systems for the following forestry machines are discussed in this standard:
- Forestry cable winches according to EN ISO 19472, winches with outriggers for forestry trailers, log splitters and cutting splitters as well as hauling winches;
- Self-propelled machinery for ...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function od combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting blades used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation. For the purposes of this standard the following types of pedestrian controlled machines are considered to be motor mowers:
-   flail mowers;
-   grassland mowers;
-   scrub clearing machines;
-   ...
view more

    • sale 10% off
    • Draft
      91 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      92 pages
      English language
    • e-Library read for
      1 day

This European Standard, when used together with EN ISO 4254 1 and EN 15811, specifies safety requirements and measures for all types and sizes of self-propelled rough-terrain work platforms for orchard’s operations (WPO) as defined in 3.1, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations rela...view more

    • sale 10% off
    • Draft
      73 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This document, intended to be used together with ISO 4254-1, specifies the safety requirements and
their verification for the design and construction of mounted, semi-mounted and trailed power-driven
soil-working machines used in agriculture. In addition, it specifies the type of information on safe
working practices (including residual risks) to be provided by the manufacturer.
This document deals with significant hazards (as listed in Annex A), hazardous situations and events
relevant to ...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of informatio...view more

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer
application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used ...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This document is applicable for sprayers intended to apply liquid over a horizontal surface.
This document specifies test methods to assess sprayed liquid horizontal transverse distribution.
Methods are based on sprayed liquid volume measurement, nozzle flow rate measurement or nozzle tip
pressure measurement.
This document does not cover aerial sprayers.
Hydraulic sprayers use a range of design features to deliver and control spray. The test methods
provided in this document are all usefu...
view more

    • sale 15% off
    • Standard
      11 pages
      French language
    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies the test method to assess the performance of volume/area adjustment systems
for spray systems.
This document is not applicable for manually-operated knapsack sprayers or for aircraft sprayers.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document, when used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters
and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising
from the intended use of these machines by one person (the operator) in the course of normal operation
and service. In addition, it specifies the type of information on safe working practices to b...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

ISO 5682-1:2017 specifies test methods to assess the performance of sprayer nozzles with the exception of droplet characteristics. Applicable tests by nozzle type are described in an informative annex as a guide, but this is not required for use of this document.

    • sale 15% off
    • Standard
      35 pages
      French language
    • sale 15% off
    • Standard
      35 pages
      English language
    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day

This standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regu...
view more

    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to cabs of agricultural and forestry tractors and self-propelled sprayers. Its purpose is to limit the exposure of the operator (driver) to hazardous substances when applying plant protection products (PPP) and liquid fertilisers. This European Standard specifies different categories of cabs of agricultural and forestry tractors and self-propelled sprayers and the relevant requirements and test procedures in order to limit the exposure of the operator (driver...view more

    • sale 10% off
    • Draft
      28 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to filters as part of cabs of categories 2, 3 and 4 of agricultural and forestry tractors and self-propelled sprayers as specified in EN 15695-1 in order to limit the exposure of the operator (driver) to hazardous substances, in agricultural and forestry operations. It specifies requirements, test procedures and the information to be provided by the filter manufacturer.
This standard does not cover:
   the exposure linked to fumigants;
   the category of cab...
view more

    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This part of ISO 5721 specifies the requirements, test procedures and acceptance criteria for the field of
vision to the front of the operator of agricultural tractors.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      French language
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This part of ISO 5721 specifies the requirements, test procedures, and acceptance criteria for the field of
vision to the side and the rear of the operator of agricultural tractors.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

ISO 13693-1:2013 specifies the general requirements and test methods for small plastics-bodied valves used for chemigation, intended for operation in irrigation pipe systems which may contain fertilizers and chemicals of the type and concentration used in agriculture.
It is applicable to controllable safety devices (also known as backflow preventers) with a reduced pressure zone (RPZ), intended to prevent backflow by back-siphonage or backpressure of irrigation water into an upstream potable wa...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements, and their verification for the design and construction of wedge splitters, designed to be used (operated?) by one operator for splitting logs for firewood, irrespective of the nature of the power source used. Automatic or semi-automatic wedge splitters are to be included within the scope of the standard. Firewood processors are excluded from the scope of the standard.
This standard describes methods for the elimination or reduction of risks ...
view more

    • sale 10% off
    • Standard
      59 pages
      English language
    • e-Library read for
      1 day

This Europen Standard establishes a uniform format for reporting accidents where the following equipment is involved:
-  Agricultural and forestry tractors (NACE code 09.02.03.01)
-  Equipment fitted on tractors (e.g. a front - end loader) (NACE code 09.02.99.00)
-  Equipment mounted on the tractor (front and/or rear) (NACE code 09.02.99.00)
-  Equipment towed by tractors (trailers and machinery) (NACE code 09.02.04.99)
-  Self - propelled machinery (NACE 09.02.03.02)
-  Telescopic loaders (NAC...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This standard, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed bale wrappers for forage bales. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This part of ISO 789 specifies a method of determining the turning and clearance diameters of wheeled
agricultural tractors.
It applies to wheeled agricultural tractors having at least two axles fitted with pneumatic tyres.

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies a method for the measuring and reporting of the noise at the
operator(s) position of a tractor used in agriculture and forestry. The measured noise relates only to the
basic machine and applies to tractors with machine-carried operators. The results provide information
to the operator(s) in order to avoid exposing themselves to noise levels that could put their hearing at
risk.
The conditions specified for the operation of the machines during the measur...
view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      13 pages
      English language
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the content and gives guidance on the format of operator’s manuals
for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It is
intended to assist manufacturers of the machinery in the drafting and presentation of these manuals.
Manuals intended for use by a service technician are not within the scope of this International Standard.

    • sale 15% off
    • Standard
      9 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This part of ISO 11001 specifies the essential dimensions for the attachment of three-point hitch
implements to agricultural wheeled and track-laying tractors equipped with a three-point free link
hitch according to ISO 730 or ISO 8759-1 and a U-frame hitch coupler.
NOTE In general the dimensions associated with the tractor and implement for use with hitch couplers are
the same as those for the three-point linkage specified in ISO 730 or ISO 8759-1, and those for the clearance zone
specifie...
view more

    • sale 15% off
    • Standard
      9 pages
      French language
    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      French language
    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

MINOR AMENDMENT

    • sale 10% off
    • Amendment
      4 pages
      German language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day

This standard specifies terms, definitions and principles to allow the consideration of all production and product (machinery) related aspects of sustainability with respect to all machines covered by the scope of TC 144. The objective is to provide a common and consistent approach for all TC 144 areas and guidance for the development of product specific standards.

    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the safety requirements and their verification for the design and construction of hand-held combustion engine powered and back-pack combustion engine powered, garden vacuums and garden blower/vacuums with or without shredding means and garden blowers, designed for one operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
Throughout this European Standard the term ...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day