This document specifies the requirements for a two-components flexible polyurethane topcoat to be applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.
The primer and the finish tested to this document will be from the same manufacturer applied in accordance with (i.a.w.) their instructions/Table 1.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, high corrosion inhibiting epoxy primer.
The coating shall be suitable for use on suitably prepared metallic substrates, chromic acid anodised, or conversion coated aluminium alloys and other suitably prepared substrates.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This Technical Reports describes quality designations and indications for algae and directly derived products from algae production required for or by pharma producers and industry. It does not apply to Food and Feed sectors.
Note: This TRs does not provide instructions on existing handling of technical requirements in existing legislations.

    • sale 10% off
    • Technical report
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      39 pages
      English language
    • e-Library read for
      1 day

This Technical Reports describes quality designations and indications for algae and directly derived products from algae production required for or by cosmetics producers and industry. It does not apply to Food and Feed sectors.
Note: This TRs does not provide instructions on existing handling of technical requirements in existing legislations

    • sale 10% off
    • Technical report
      41 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      44 pages
      English language
    • e-Library read for
      1 day

The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as ...view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      42 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies a test method for determining the Vickers and Knoop hardness of
monolithic fine ceramics at room temperature.

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day

ISO 18610:2016 specifies an ultrasonic method to determine the components of the elasticity tensor of ceramic matrix composite materials at room temperature. Young's moduli shear moduli and Poisson coefficients, can be determined from the components of the elasticity tensor.
It applies to ceramic matrix composites with a continuous fibre reinforcement: unidirectional (1D), bidirectional (2D), and tridirectional (×D, with 2 < × ≤ 3) which have at least orthotropic symmetry, and whose material sy...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day

ISO 17172:2014 specifies the test method for determining the extent to which granulated or ungranulated ceramic powders are compacted, when subjected to uniaxial compressive loading in a confining die, under specified conditions.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

This European Standard contains safety-related requirements for high pressure water jet machines with drives of all kinds (e.g. electric motor, internal combustion engine, air and hydraulic) in which pumps are used to generate pressure. This document deals with all significant hazards, hazardous situations and events arising during assembly, erection, operation and servicing relevant to high pressure water jet machines, when they are used as intended and under conditions of misuse which are reas...view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day

1.1 This document provides the vocabulary, fundamental concepts and principles of innovation management and its systematic implementation. It is applicable to:
a) organizations implementing an innovation management system or performing innovation management assessments;
b) organizations that need to improve their ability to effectively manage innovation activities;
c) users, customers and other relevant interested parties (e.g. suppliers, partners, funding organizations, investors, universiti...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      42 pages
      English language
    • e-Library read for
      1 day

This document provides a guidance for innovation partnerships. It describes the innovation partnership framework (see Clause 4 to Clause 8) and the sample corresponding tools (see Annex A to Annex E) to
— decide whether to enter an innovation partnership,
— identify, evaluate and select partners,
— align the perceptions of value and challenges of the partnership,
— manage the partner interactions.
The guidance provided by this document is relevant for any type of partnerships and collaborat...
view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, chromate and lead-free primer.
The coating shall be suitable for use on fibre reinforced composite materials, titanium and corrosion resistant steels and other suitably prepared corrosion resistant substrates.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

1.1 This document provides guidance for the establishment, implementation, maintenance, and continual improvement of an innovation management system for use in all established organizations. It is applicable to:
a) organizations seeking sustained success by developing and demonstrating their ability to effectively manage innovation activities to achieve the intended outcomes;
b) users, customers, and other interested parties, seeking confidence in the innovation capabilities of an organization...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This document defines the dimensions, local design pressures and global loads acting on multihull
craft with a hull length (LH) or load line length of up to 24 m (see Note). It considers all parts of the
craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in
accordance with ISO 12217 (all parts). Scantlings corresponding to the local design pressures are then
assessed using ISO 12215-5.
NOTE The load line length is defined in the OMI "Internati...
view more

    • sale 10% off
    • Standard
      67 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      60 pages
      English language
    • e-Library read for
      1 day

This document specifies detailed manufacturing requirements for circular steel and nickel alloy
compact flanged connections and associated seal rings, for designated pressures and temperatures
in class designations CL 150 (PN 20) to CL 1500 (PN 260) for nominal sizes from DN 15 (NPS ½) to
DN 1200 (NPS 48), and for CL 2500 (PN 420) for nominal sizes from DN 15 (NPS ½) to DN 600 (NPS 24).
NOTE NPS is expressed in accordance with ASME B36.10M and ASME B36.19M.
This document is applicable to we...
view more

    • sale 10% off
    • Standard
      116 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      121 pages
      English language
    • e-Library read for
      1 day

This document provides a series of standard testing methods to determine the resistance of flat or curved surfaces against abrasion, scratch or punch under high dynamics as may occur for example by manually operating actuators or due to impacts of materials like shoes, cases, bags and other common objects of everyday’s usage inside an aircraft cabin. The method is also suitable to test the resistance of a surface against all other high dynamic strains.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the monitoring of mechanical tests and inspections performed both at the
material (coupon) and at the structural scale by the implementation of kinematic field measurements by
digital image correlation. This document describes an in situ method for evaluating the metrological
performance of an extensometer system using image correlation for the delivery of displacement fields,
and by extrapolation, of deformation fields. It can be implemented prior to the actual start...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

The scope of this European Standard is to define the classification for horizontal closed ice-cream freezers and to specify their requirements and test methods. These appliances are different to supermarket segment freezers, as they work with static air cooling, with a skin evaporator (no evaporator fan) and are used specifically for the storage and display of pre-packed ice-cream. This standard is only applicable to integral type refrigeration systems. This standard is not applicable to remote ...view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      52 pages
      English language
    • e-Library read for
      1 day

This document defines terms related to nanomanufacturing processes in the field of nanotechnologies.
All the process terms in this document are relevant to nanomanufacturing, however, many of the listed
processes are not exclusively relevant to the nanoscale. Terms that are not exclusive are noted within
the definitions. Depending on controllable conditions, such processes can result in material features at
the nanoscale or, alternatively, at larger scales.
There are many other terms that n...
view more

    • sale 10% off
    • Technical specification
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      35 pages
      English language
    • e-Library read for
      1 day

This document specifies the electrolytic cadmium plating of parts and fasteners in steel of tensile strength Rm (max.)  1 450 MPa, copper, copper alloys and nickel alloys, whose temperature in service does not exceed 235 °C.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

2020-10-21 - TC - Addition of figure designations "A" and "B" in Figure 2

    • sale 10% off
    • Corrigendum
      2 pages
      English language
    • e-Library read for
      1 day

This document describes general principles and gives requirements and recommendations for the
selection and qualification of metallic materials for service in equipment used in oil and gas production
and in natural-gas sweetening plants in H2S-containing environments, where the failure of such
equipment can pose a risk to the health and safety of the public and personnel or to the environment.
It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements,...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and recommendations for the selection and qualification of CRAs
(corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas
production and natural gas treatment plants in H2S-containing environments whose failure can pose
a risk to the health and safety of the public and personnel or to the environment. It can be applied to
help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, ...
view more

    • sale 10% off
    • Standard
      80 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      77 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and provides recommendations applicable to the following types
of fixed steel offshore structures for the petroleum and natural gas industries:
— caissons, free-standing and braced;
— jackets;
— monotowers;
— towers.
In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups,
other bottom founded structures and other structures related to offshore structures (such as underwater
oil storage tanks, bridges a...
view more

    • sale 10% off
    • Standard
      585 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      648 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and recommendations for the selection and qualification of carbon
and low-alloy steels for service in equipment used in oil and natural gas production and natural gas
treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety
of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion
damage to the equipment itself. It supplements, but does not replace, the materials requi...
view more

    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      53 pages
      English language
    • e-Library read for
      1 day

This document defines terms related to carbon nano-objects in the field of nanotechnologies.
It is intended to facilitate communication between organizations’ and individuals’ research, industry
and other interested parties and those who interact with them. Additional terms and definitions for
graphene and two-dimensional materials (2D) materials are provided in ISO/TS 80004-13.
Related carbon nanoscale materials are given in Annex A.

    • sale 10% off
    • Technical specification
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      16 pages
      English language
    • e-Library read for
      1 day

This document defines terms used in the field of conservation of cultural heritage for the description of alteration of objects with particular attention to those terms which
are applied to many types of objects.This document applies to all types of material changes that can be observed.

    • sale 10% off
    • Technical specification
      36 pages
      English, French and German language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      75 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This European Standard gives guidelines for the design of clad rack buildings where requirements are not covered in EN 1993. The requirements of this European Standard also apply to ancillary structures, wher...
view more

    • sale 10% off
    • Standard
      184 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      177 pages
      English language
    • e-Library read for
      1 day

This method determines the coefficient of friction between footwear and floorings under conditions simulating those experienced in the phases of a typical walking step when slip is most likely to occur.
The method is applicable to all types of footwear, outsole units, heel top pieces (top lifts) and sheet soling materials.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

This document establishes definitions of main dimensions and related data and of mass specifications
and loading conditions. It applies to small craft having a length of the hull (LH) of up to 24 m.

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifie...
view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      54 pages
      English language
    • e-Library read for
      1 day

This document applies to the design of mobile access and working towers made of prefabricated elements with dimensions which are fixed by the design and with a height up to 12 m (indoors) and up to 8 m (outdoors). This document applies to mobile access and working towers used as temporary work equipment.
This document:
-   gives guidelines for the choice of the main dimensions and stabilizing methods,
-   gives safety and performance requirements; and
-   gives information on complete towers.
Thi...
view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      38 pages
      English language
    • e-Library read for
      1 day

The current and future infrastructure to satisfy the changing needs of citizens in the EU will grant access
to wider postal stakeholders, including customers, postal suppliers, supply chain service providers, (i.e.
customs, fiscal authorities collecting VAT and related duties, transport providers like airlines or rail road
and other transport mode operators, non-profit organisations supporting supply chain traceability, etc.)
non-designated economic postal operators (Courier-, Express-, and ...
view more

    • sale 10% off
    • Technical report
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      52 pages
      English language
    • e-Library read for
      1 day

This document provides the semantic mapping description of information on the characteristics or
attributes of Low Value Consignments (LVC) which parties in the digital commercial value chain acrossborders
are called upon to handle, compliant to the EU VAT Ecommerce Package as well as the UPU-WCO
customs model.
This document is limited to LVC, the logical definition of an electronic message, which supports the
communication of information about postal items with a unique transport unit iden...
view more

    • sale 10% off
    • Technical report
      93 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      98 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies two test methods for the determination of the flexing durability of whole shoes. The two methods may not give comparable results.
These methods are not applicable to the whole shoes with heel height more than 70 mm, or the thickness of flexing area of the soles more than 25 mm, or flexing angle less than 45° according to ISO 17707:2005 clause 6 rigidity test.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document applies to stationary surface-finishing machines with stationary work piece (see 3.1) or with moving work piece (see 3.2) which are used to grind or polish horizontal surfaces of slabs, strips or tiles of natural stone and engineered stone (e.g. agglomerated stone) as defined by EN 14618:2009.
This document deals with all significant hazards, hazardous situations and events relevant to surface-finishing machines, when they are used as intended and under conditions of misuse which ...
view more

    • sale 10% off
    • Standard
      57 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      47 pages
      English language
    • e-Library read for
      1 day

This standard describes a method for determining the attachment strength of footwear upper straps joined to the sole, upper decorations, hooks, eyelets and trims.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for the determination of:
— the design loads and design stresses on rig elements; and
— the loads and scantlings of rig attachments and mast steps/pillars;
on monohull and multihulls sailing craft.
It also gives, in Annexes, "established practices" for the assessment of mast steps/pillars or chainplates
NOTE 1 Other engineering methods can be used provided the design loads and design stresses are used.
This document is applicable to craft with a hull length ...
view more

    • sale 10% off
    • Standard
      87 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      74 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the field of vision from the steering position, forward
(horizontally and vertically) and astern, for small craft up to 24 m length of hull (LH) in accordance with
ISO 8666:2016.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

This Standard specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.
The method is aimed to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking or children’s footwear, where the upper of one of the shoes is expected to rub with the sole of the other. This method is applicable to all types of leather and synthetic materials intended for shoe upper...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the characteristics of adjustable rod-ends consisting of:
- a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265)
- a rod end with internal threaded shank
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and select...
view more

    • sale 10% off
    • Standard
      76 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the sit...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document covers physical properties and characteristics for the packaging for small and light weight postal items to be delivered into the consumer’s letterbox. It covers the main design features for the packaging of letterboxable postal items, notably the sizes and stacking as well as postal and environmental requirements.
This document is targeted to e-retailers and postal operators.

    • sale 10% off
    • Technical specification
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      16 pages
      English language
    • e-Library read for
      1 day

This document will help the user understand why it is beneficial to carry out an Innovation Management Assessment (IMA), what to assess, how to carry out the IMA, and thus maximize the resulting benefits, which are universally applicable to:
— organizations seeking sustained success in their innovation activities;
— organizations performing IMAs;
— users and other interested parties (e.g. customers, suppliers, partners, funding organizations, universities and public authorities) seeking confi...
view more

    • sale 10% off
    • Technical report
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      35 pages
      English language
    • e-Library read for
      1 day

This standard describes a method for determining the attachment strength of heel top pieces.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      8 pages
      English language
    • e-Library read for
      1 day

This draft European Standard applies to personal light electric vehicles totally or partially electrically powered from self-contained power sources with or without self-balancing system.
This draft European Standard applies to vehicles having battery voltages up to 100VDC, and/or an integrated battery charger with up to a 240VAC input.
It specifies safety requirements, test methods, marking and information relating to personal light electric vehicles to reduce the risk of injuries to both thi...
view more

    • sale 10% off
    • Standard
      86 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      85 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      90 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      83 pages
      English language
    • e-Library read for
      1 day