37.060.10 - Motion picture equipment

This document specifies digital code for mats and modulation methods for motion-picture film to be used for timing, control, editing and synchronization purposes. This document also specifies the relationship of the codes to the motion picture frame. Two types of code are described in this document. The first type, Type C, is a continuous code which is very similar to the continuous code specified in IEC 60461. This type of code can be used in situations where the film is moving continuously at ...view more

ISO 2910:2018 specifies the screen luminance level and chrominance white point for theatrical projection of 70 mm, 35 mm and 16 mm motion-picture prints at a rate of 24 frames per second. ISO 2910:2018 can also be applicable to the non-theatrical presentation of 70 mm, 35 mm and 16 mm motion-picture prints intended for projection at 24 frames per second. NOTE Throughout this document, the term "screen" means the screen-picture area appropriate to the film format and projection system in use.

Outcome of TC 61 meeting in November 2007: dow of 60 months for those amendments which bring a change in the scope concerning the limitation clause  (see also BT132/DG7310/INF)

Deals with the safety of electric projectors and similar appliances, their rated voltage being not more than 250 V, for household and similar purposes. Some examples of appliacnes that are within the scope of this standard are effects projectors, film-strip projectors, microscope projectors, motion-picture projectors, overhead projectors, photographic enlargers, still view and photo-reproduction appliances. This consolidated version consists of the third edition (2002) and its amendment 1 (2008)...view more

Outcome of TC 61 meeting in November 2007: dow of 60 months for those amendments which bring a change in the scope concerning the limitation clause  (see also BT132/DG7310/INF)

ISO 1793:2005 specifies the dimensions and characteristics of 16 mm motion-picture film projection reels.

Deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, feral animal control and security fences may be electrified of monitored.

Deals with the safety of electric projectors and similar appliances, their rated voltage being not more than 250 V, for household and similar purposes. Some example of appliances that are within the scope of this standard are effects projectors, film-strip projectors, microscope projectors, motion-picture projectors, overhead projectors, photographic enlargers, still view and photo-reproduction appliances.

Deals with the safety of electric projectors and similar appliances, their rated voltage being not more than 250 V, for household and similar purposes. Some examples of appliacnes that are within the scope of this standard are effects projectors, film-strip projectors, microscope projectors, motion-picture projectors, overhead projectors, photographic enlargers, still view and photo-reproduction appliances.

Specifies the position of the emulsion, the frame rate of exposure, and the orientation of the emulsion area being exposed for 16 mm silent and sound motion-picture film perforated along one or both edges.

Specifies the location of the photographic emulsion, the orientation of the areas intended for the picture and photographic sound exposures and the frame rate for 35 mm motion-picture film cameras.

Specifies emulsion orientation, rate of projection, position of the projected image area and the relationship between picture and sound in the projector, intended for direct front projection of 16 mm motion-picture films with photographic and magnetic sound records and 16 mm silent motion-picture films.