EN 13648-2:2002

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service

This European Standard specifies the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below - 10 °C in addition to operation at ambient temperature. It is a requirement of this standard that the bursting disc safety device(s) comply with prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard.
This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve single phase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitable for  use with more than one gas or with mixtures of gases.
NOTE   This standard does not provide methods for determining the capacity of bursting disc safety devices for a particular cryogenic vessel. Such methods are provided in prEN 13648-3.

Kryo-Behälter - Sicherheitseinrichtungen gegen Drucküberschreitung - Teil 2: Berstscheibeneinrichtungen

Diese Europäische Norm legt Anforderungen für die Konstruktion, Herstellung und die Prüfung von Berstscheibeneinrichtungen für den Kryo-Betrieb fest, z. B. für den Betrieb mit tiefkalten Fluiden unter - 10 °C, in Ergänzung zu dem Betrieb bei Umgebungstemperaturen. Diese Norm fordert, dass die Berstscheibeneinrichtungen der prEN ISO 4126-2 entsprechen. Im Streitfall gelten die Anforderungen in dieser Norm vorrangig
Diese Norm beschränkt sich auf Berstscheibeneinrichtungen, die eine Nennweite von DN 100 nicht überschreiten und für Einzelgase und Dämpfe konstruiert sind und zur Anwendung bei den verschiedenen Gasen und Gasgemischen geeignet sein dürfen.
ANMERKUNG   Diese Norm sieht keine Verfahren zur Bestimmung des Ausflusses von Berstscheibeneinrichtungen eines bestimmten Behälters vor; diese Verfahren sind in prEN 13648-3 vorgesehen.

Récipients cryogéniques - Dispositifs de protection contre les supressions - Partie 2: Dispositif de sécurité à disque de rupture pour service cryogénique

La présente norme spécifie les exigences relatives à la conception, à la fabrication et aux essais de dispositifs à disque de rupture pour usage cryogénique, c'est-à-dire destinés à fonctionner avec des fluides cryogéniques à une température inférieure à -10 °C ainsi qu'à température ambiante. La présente norme exige que le ou les dispositifs à disque de rupture soient conformes au prEN ISO 4126-2. En cas d'exigences contradictoires, les exigences de la présente norme l'emportent sur celles de la norme susmentionnée.

Kriogene posode - Varnostna oprema proti prekoračitvi tlaka - 2. del: Varnostne membrane za kriogeno področje

General Information

• Status: Published
• Publication Date: 21-May-2002
• Withdrawal Date: 29-Nov-2002
• ICS: 13.240 - Protection against excessive pressure
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: CEN/TC 268 - Cryogenic vessels
• Drafting Committee: CEN/TC 268/WG 2 - Compatibility, insulation, accessories
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Mar-2024
• Completion Date: 03-Mar-2024
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13648-2:2002 - Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kryo-Behälter - Sicherheitseinrichtungen gegen Drucküberschreitung - Teil 2: BerstscheibeneinrichtungenRécipients cryogéniques - Dispositifs de protection contre les supressions - Partie 2: Dispositif de sécurité a disque de rupture pour service cryogéniqueCryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service23.020.40Proti mrazu odporne posode (kriogenske posode)Cryogenic vessels13.240Varstvo pred previsokim tlakomProtection against excessive pressureICS:Ta slovenski standard je istoveten z:EN 13648-2:2002SIST EN 13648-2:2002en01-november-2002SIST EN 13648-2:2002SLOVENSKI
STANDARD



SIST EN 13648-2:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13648-2May 2002ICS 23.060.40English versionCryogenic vessels - Safety devices for protection againstexcessive pressure - Part 2: Bursting disc safety devices forcryogenic serviceRécipients cryogéniques - Dispositifs de protection contreles supressions - Partie 2: Dispositif de sécurité à disquede rupture pour service cryogéniqueKryo-Behälter - Sicherheitseinrichtungen gegenDrucküberschreitung - Teil 2: BerstscheibeneinrichtungenThis European Standard was approved by CEN on 5 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13648-2:2002 ESIST EN 13648-2:2002



EN 13648-2:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.54Requirements.54.1General.54.2Design.54.2.1Design temperature.54.2.2Coincident temperature.54.2.3Sublimating cryogens.64.3Materials.64.3.1General.64.3.2Metallic materials.64.3.3Corrosion resistance.64.3.4Oxygen compatibility.
...