CWA 17935:2022
(Main)Sustainable Nanomanufacturing Framework
Sustainable Nanomanufacturing Framework
This document describes and specifies the requirements of a simplified Sustainability Nanomanufacturing Framework (SNF) for sustainability management in Nanomanufacturing Pilot Lines (NPLs), appropriate to their size, management capabilities and sustainability priorities.
The SNF sets up the basic requirements for a screening methodology to quicky assess the sustainability of a NPL. It provides guidance for diagnosis, implementation, and monitoring, to proactively improve nano-sustainability performances in NPLs, considering its sustainability management and results.
The model can be used by NPLs to achieve its intended outcomes in the field of nano-sustainability.
The SNF is intended to be applied to any NPL regardless of its size, type and activities. Similarly, the model could be scaled to manage the sustainability of a manufacturing area/plant that integrates multiple NPLs.
This document can be used in whole or in part to systematically improve the sustainability in NPLs.
Okvir trajnostne nanoproizvodnje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST CWA 17935:2022
01-december-2022
Okvir trajnostne nanoproizvodnje
Sustainable Nanomanufacturing Framework
Ta slovenski standard je istoveten z: CWA 17935:2022
ICS:
07.120 Nanotehnologije Nanotechnologies
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
SIST CWA 17935:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST CWA 17935:2022
---------------------- Page: 2 ----------------------
SIST CWA 17935:2022
CEN
CWA 17935
WORKSHOP
October 2022
AGREEMENT
ICS 07.120; 13.020.20
English version
Sustainable Nanomanufacturing Framework
This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the
constitution of which is indicated in the foreword of this Workshop Agreement.
The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the
National Members of CEN but neither the National Members of CEN nor the CEN-CENELEC Management Centre can be held
accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation.
This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members.
This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELE CENELEC Members.
C
Ref. No.:CWA 17935:2022 E
---------------------- Page: 3 ----------------------
SIST CWA 17935:2022
CWA 17935:2022(E)
Contents Page
Foreword . 4
Introduction . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
4 Definition of the Sustainable Nanomanufacturing Framework (SNF) . 14
5 Operating procedure to evaluate the SNF and to build the sustainability dashboard
. 41
6 SNF implementation and continuous improvement . 43
Annex A (informative) Practical example of the implementation of the operating procedure
to assess the SNF and build the sustainability dashboard, in Nanomanufacturing Pilot
Line 4 (NPL 4) of the OASIS project (EU-project OASIS – GA 814581). . 45
A.1 Introduction . 45
A.2 SNF customization . 46
A.3 Sustainability Management assessment (SM) . 47
A.4 Sustainability Results assessment (SR) . 48
A.5 Sustainability improvement . 48
Annex B (informative) Use Cases of diagnosis (step 0) and planning (step 1) of
Nanomanufacturing Pilot Lines of the OASIS project (EU-project OASIS – GA 814581).
.
...
SLOVENSKI STANDARD
SIST-TP CWA 17935:2022
01-december-2022
Okvir trajnostne nanoproizvodnje
Sustainable Nanomanufacturing Framework
Ta slovenski standard je istoveten z: CWA 17935:2022
ICS:
07.120 Nanotehnologije Nanotechnologies
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
SIST-TP CWA 17935:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CWA 17935:2022
---------------------- Page: 2 ----------------------
SIST-TP CWA 17935:2022
CEN
CWA 17935
WORKSHOP
October 2022
AGREEMENT
ICS 07.120; 13.020.20
English version
Sustainable Nanomanufacturing Framework
This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the
constitution of which is indicated in the foreword of this Workshop Agreement.
The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the
National Members of CEN but neither the National Members of CEN nor the CEN-CENELEC Management Centre can be held
accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation.
This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members.
This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELE CENELEC Members.
C
Ref. No.:CWA 17935:2022 E
---------------------- Page: 3 ----------------------
SIST-TP CWA 17935:2022
CWA 17935:2022(E)
Contents Page
Foreword . 4
Introduction . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
4 Definition of the Sustainable Nanomanufacturing Framework (SNF) . 14
5 Operating procedure to evaluate the SNF and to build the sustainability dashboard
. 41
6 SNF implementation and continuous improvement . 43
Annex A (informative) Practical example of the implementation of the operating procedure
to assess the SNF and build the sustainability dashboard, in Nanomanufacturing Pilot
Line 4 (NPL 4) of the OASIS project (EU-project OASIS – GA 814581). . 45
A.1 Introduction . 45
A.2 SNF customization . 46
A.3 Sustainability Management assessment (SM) . 47
A.4 Sustainability Results assessment (SR) . 48
A.5 Sustainability improvement . 48
Annex B (informative) Use Cases of diagnosis (step 0) and planning (step 1) of
Nanomanufacturing Pilot Lines of the OASIS project (EU-project OASIS – GA 814581).
.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.