EN ISO 19014-4:2020

Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO 19014-4:2020)

This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery (EMM) and its equipment, as defined in ISO 6165. In addition, this document addresses the significant hazards as defined in ISO 12100 related to the software embedded within the machine control system. The significant hazards being addressed are the incorrect machine control system output responses from machine control system inputs.
Cyber security is out of the scope of this document.
NOTE    For guidance on cybersecurity, see an appropriate security standard.
This document is not applicable to EMM manufactured before the date of its publication.

Erdbaumaschinen - Funktionale Sicherheit - Teil 4: Gestaltung und Beurteilung von Software und Datenübertragung für sicherheitsrelevante Steuerungssysteme (ISO 19014-4:2020)

Dieses Dokument legt allgemeine Grundsätze für Anforderungen an Software-Entwicklung und Signalübertragung von sicherheitsbezogenen Teilen von Maschinensteuerungssystemen (MCS, en: machine-control systems) in Erdbaumaschinen (EMM, en: earth-moving machinery) und deren Ausrüstung, wie in ISO 6165 definiert, fest. Zudem behandelt dieses Dokument die in ISO 12100 festgelegten signifikanten Gefährdungen in Bezug auf die im Maschinensteuerungssystem eingebettete Software. Bei den behandelten signifikanten Gefährdungen handelt es sich um das falsche Ansprechen der Ausgabe von Maschinensteuerungssystemen auf Eingaben in Maschinensteuerungssystemen.
Cybersicherheit liegt außerhalb des Anwendungsbereichs dieses Dokuments.
ANMERKUNG Hinweise zur Cybersicherheit sind in einer geeigneten Sicherheitsnorm zu finden.
Dieses Dokument gilt nicht für EMM, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.

Engins de terrassement - Sécurité fonctionnelle - Partie 4: Conception et évaluation du logiciel et de la transmission des données pour les parties relatives à la sécurité du système de commande (ISO 19014-4:2020)

Le présent document spécifie les principes généraux applicables aux exigences en matière de développement de logiciel et de transmission des signaux des parties relatives à la sécurité des systèmes de commande de la machine (MCS) dans les engins de terrassement et leur équipement tels que définis dans l'ISO 6165. De plus, le présent document traite des phénomènes dangereux significatifs tels que définis dans l'ISO 12100 en rapport avec les logiciels intégrés dans le système de commande de la machine. Les phénomènes dangereux significatifs traités sont les réponses incorrectes du système de commande de la machine aux entrées du système de commande de la machine.
La cybersécurité n'est pas couverte par le présent document.
NOTE       Voir une norme appropriée relative à la sécurité pour des recommandations à propos de la cybersécurité.
Le présent document n'est pas applicable aux engins de terrassement fabriqués avant la date de sa publication.

Stroji za zemeljska dela - Funkcijska varnost - 4. del: Načrtovanje in vrednotenje programske opreme in prenosa podatkov za dele krmilnega sistema, povezane z varnostjo (ISO 19014-4:2020)

General Information

• Status: Published
• Publication Date: 18-Aug-2020
• Withdrawal Date: 27-Feb-2021
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Aug-2020
• Due Date: 12-Mar-2019
• Completion Date: 19-Aug-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 19014-4:2020 - Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO 19014-4:2020)

Relations

• Revised: prEN ISO 19014-4 - Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO/DIS 19014-4:2024)
• Effective Date: 04-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19014-4:2020
01-november-2020
Stroji za zemeljska dela - Funkcijska varnost - 4. del: Načrtovanje in vrednotenje
programske opreme in prenosa podatkov za dele krmilnega sistema, povezane z
varnostjo (ISO 19014-4:2020)
Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software
and data transmission for safety-related parts of the control system (ISO 19014-4:2020)
Erdbaumaschinen - Sicherheit - Teil 4: Gestaltung und Beurteilung von Software und
Datenübertragung für sicherheitsrelevante Steuerungssysteme (ISO 19014-4:2020)
Engins de terrassement - Sécurité - Partie 4: Conception et évaluation du logiciel et de
la transmission des données pour les parties relatives à la sécurité du système de
commande (ISO 19014-4:2020)
Ta slovenski standard je istoveten z: EN ISO 19014-4:2020
ICS:
35.080 Programska oprema Software
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 19014-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19014-4:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19014-4:2020


EN ISO 19014-4
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 53.100
English Version

Earth-moving machinery - Functional safety - Part 4:
Design and evaluation of software and data transmission
for safety-related parts of the control system (ISO 19014-
4:2020)
Engins de terrassement - Sécurité fonctionnelle - Partie Erdbaumaschinen - Funktionale Sicherheit - Teil 4:
4: Conception et évaluation du logiciel et de la Gestaltung und Beurteilung von Software und
transmission des données pour les parties relatives à la Datenübertragung für sicherheitsrelevante
sécurité du système de commande (ISO 19014-4:2020) Steuerungssysteme (ISO 19014-4:2020)
This European Standard was approved by CEN on 29 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19014-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19014-4:2020
EN ISO 19014-4:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19014-4:2020
EN ISO 19014-4:2020 (E)
European foreword
This document (EN ISO 19014-4:2020) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North M
...