EN 622-4:2009

Fibreboards - Specifications - Part 4: Requirements for softboards

This European Standard specifies the requirements for softboards as defined in EN 316, with a density - 230 kg/m3 to 400 kg/m3.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten

Diese Europäische Norm legt die Anforderungen an poröse Platten nach EN 316 mit einer Rohdichte von 230 kg/m3 bis 400 kg/m3 fest.
Die in dieser Europäischen Norm angegebenen Werte beziehen sich auf Produkteigenschaften; es sind keine charakteristischen Werte, die für konstruktive Berechnungen verwendet werden können.
ANMERKUNG   Für Platten, die ausschließlich zur Verwendung als Wärmedämmprodukte vorgesehen sind, gilt EN 13171.

Panneaux de fibres - Exigences - Partie 4: Exigences pour panneaux tendres

La présente norme Européenne prescrit les exigences pour panneaux isolants tels que définis dans l’EN 316
avec une masse volumique ≥ 230 kg/m3 à 400 kg/ m3
Les valeurs données dans la présente norme concernent les caractéristiques du produit mais ne sont pas les
valeurs caractéristiques à utiliser dans les calculs de conception.
NOTE les panneaux prévus pour être utilisés uniquement en tant que panneaux isolants thermiques sont couverts
par la norme EN 13171.

Vlaknene plošče - Specifikacije - 4. del: Zahteve za mehke plošče

Ta evropski standard določa zahteve za mehke plošče, kot so opredeljene v EN 316, z gostoto ≥ 230 kg/m3 do 400 kg/m3. Vrednosti, navedene v tem evropskem standardu, se nanašajo na lastnosti proizvodov, vendar niso značilne vrednosti, ki bi jih uporabljali v izračunih pri načrtovanju.

General Information

• Status: Withdrawn
• Publication Date: 17-Nov-2009
• Withdrawal Date: 11-Jun-2019
• ICS: 79.060.20 - Fibre and particle boards
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 11 - Particleboards and fibreboards
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Jun-2019
• Ref Project: SIST EN 622-4:2010 - Fibreboards - Specifications - Part 4: Requirements for softboards

Relations

• Replaces: EN 622-4:1997 - Fibreboards - Specifications - Part 4: Requirements for softboards
• Effective Date: 22-Dec-2008
• Replaced By: EN 622-4:2019 - Fibreboards - Specifications - Part 4: Requirements for softboards
• Effective Date: 23-Aug-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 622-4:2010
01-april-2010
1DGRPHãþD
SIST EN 622-4:1998
9ODNQHQHSORãþH6SHFLILNDFLMHGHO=DKWHYH]DPHKNHSORãþH
Fibreboards - Specifications - Part 4: Requirements for softboards
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Panneaux de fibres - Exigences - Partie 4: Exigences pour panneaux isolants
Ta slovenski standard je istoveten z: EN 622-4:2009
ICS:
79.060.20 9ODNQHQHLQLYHUQHSORãþH Fibre and particle boards
SIST EN 622-4:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 622-4:2010

---------------------- Page: 2 ----------------------

SIST EN 622-4:2010


EUROPEAN STANDARD
EN 622-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2009
ICS 79.060.20 Supersedes EN 622-4:1997
English Version
Fibreboards - Specifications - Part 4: Requirements for
softboards
Panneaux de fibres - Exigences - Partie 4: Exigences pour Faserplatten - Anforderungen - Teil 4: Anforderungen an
panneaux tendres poröse Platten
This European Standard was approved by CEN on 10 October 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 622-4:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 622-4:2010
EN 622-4:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Requirements .5
4.1 General .5
4.2 Requirements for general purpose boards .6
4.2.1 Requirements for boards for use in dry conditions .6
4.2.2 Requirements for boards for use in humid conditions.6
4.2.3 Requirements for boards for use in external conditions.6
4.3 Requirements for load-bearing boards .7
4.3.1 Requirements for boards for use in dry conditions .7
4.3.2 Requirements for boards for use in humid conditions.7
5 Verification of compliance .7
5.1 General .7
5.2 External control .7
5.
...