iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10088-1:2023

(Main)

Stainless steels - Part 1: List of stainless steels

Stainless steels - Part 1: List of stainless steels

This document lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resistant steels, heat resistant steels and creep resistant steels (see Annex C) and specified in the European Standards given in Table 1.
Table 1 — Overview of material standards for stainless steels
(...)
Reference data on some physical properties are given in Annex E, Tables E.1 to E.8.
Empirical formulae for steel grade microstructure classification and pitting resistance ranking are given in Annex D.
NOTE 1   A matrix that shows which steels are included in which standard is given in Annex B.
NOTE 2   Valve steels are specified in EN 10090.
NOTE 3   Steel castings are specified in various European Standards (see Bibliography).
NOTE 4   Tool steels are specified in EN ISO 4957.
NOTE 5   Welding consumables are specified in various European Standards (see Bibliography).

Nichtrostende Stähle - Teil 1: Verzeichnis der nichtrostenden Stähle

Dieses Dokument führt die chemischen Zusammensetzungen nichtrostender Stähle auf, die nach ihren wesentlichen Eigenschaften in korrosionsbeständige Stähle, hitzebeständige Stähle und warmfeste Stähle (siehe Anhang C) eingeteilt werden und in den in Tabelle 1 angegebenen Europäischen Normen näher festgelegt sind.

Aciers inoxydables - Partie 1 : Liste des aciers inoxydables

Le présent document liste la composition chimique des aciers inoxydables, qui sont subdivisés selon leurs principales propriétés en aciers résistant à la corrosion, en aciers réfractaires et en aciers résistant au fluage (voir Annexe C) et spécifiés dans les normes européennes données dans le Tableau 1.
Tableau 1 — Vue d'ensemble des normes de matériaux pour les aciers inoxydables
(...)
Des données de référence sur quelques propriétés physiques sont données dans l'Annexe E, les Tableaux E.1 à E.8.
Les formules empiriques pour la classification des nuances d'acier par microstructure et pour la classification de la résistance à la corrosion par piqûres sont données à l'Annexe D.
NOTE 1   Une matrice qui montre quel acier est inclus dans quelle norme est donnée dans l’Annexe B.
NOTE 2   Les aciers pour soupapes sont spécifiés dans l’EN 10090.
NOTE 3   Les aciers moulés sont spécifiés dans des normes européennes variées (voir Bibliographie).
NOTE 4   Les aciers à outils sont couverts par l’EN ISO 4957.
NOTE 5   Les produits pour soudure sont spécifiés dans des normes européennes variées (voir Bibliographie).

Nerjavna jekla - 1. del: Seznam nerjavnih jekel

General Information

Status
Published
Publication Date
19-Dec-2023
ICS
77.140.20 - Stainless steels
Technical Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Drafting Committee
CEN/TC 459/SC 5/WG 2 - Stainless steels
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Dec-2023
Due Date
31-Jan-2023
Completion Date
20-Dec-2023
Ref Project
SIST EN 10088-1:2024 - Stainless steels - Part 1: List of stainless steels

Relations

Replaces
EN 10088-1:2014 - Stainless steels - Part 1: List of stainless steels
Effective Date
28-Oct-2020

Buy Standard

EN 10088-1:2024EN 10088-1:2024
PreviousNext
Standard
EN 10088-1:2024
English language
67 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10088-1:2024
01-februar-2024
Nerjavna jekla - 1. del: Seznam nerjavnih jekel
Stainless steels - Part 1: List of stainless steels
Nichtrostende Stähle - Teil 1: Verzeichnis der nichtrostenden Stähle
Aciers inoxydables - Partie 1: Liste des aciers inoxydable
Ta slovenski standard je istoveten z: EN 10088-1:2023
ICS:
77.140.20 Visokokakovostna jekla Stainless steels
SIST EN 10088-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 10088-1:2024

---------------------- Page: 2 ----------------------
SIST EN 10088-1:2024


EN 10088-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 77.140.20 Supersedes EN 10088-1:2014
English Version

Stainless steels - Part 1: List of stainless steels
Aciers inoxydables - Partie 1 : Liste des aciers Nichtrostende Stähle - Teil 1: Verzeichnis der
inoxydables nichtrostenden Stähle
This European Standard was approved by CEN on 6 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10088-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 10088-1:2024
EN 10088-1:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Chemical composition . 6
Annex A (informative) Designation of ISO stainless steels and of comparable grades covered in
various designation systems listed according to the European system .22
Annex B (informative) Matrix to show which steels are included in which European Standard .30
Annex C (informative) Classification of stainless steel grades .42
C.1 General .42
C.2 Classification by use properties .42
C.3 Classification by microstructure .43
C.4 Classification by significant alloying elements .45
Annex D (informative) Empirical formulae for steel grade microstructure classification and pitting
resistance ranking .46
Ann
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10088-3:2023(Main)
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
SIST EN 10088-3:2024

This document specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resistant stainless steels for general purposes.
NOTE   General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this document, unless otherwise specified in this document.
This document does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-17:2023(Main)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
SIST EN ISO 683-17:2023

This document specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels as listed in Table 3, namely
—     through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr),
—     case-hardening bearing steels,
—     induction-hardening bearing steels (unalloyed and alloyed),
—     stainless bearing steels, and
—     high-temperature bearing steels.
This document is applicable to the products and heat-treatment conditions given in Table 1 and the surface conditions given in Table 2.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
SIST EN ISO 683-3:2022

This document specifies the technical delivery requirements for
—    semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1),
—    bars (see NOTE 1),
—    wire rod,
—    finished flat products, and
—    hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of case-hardened machine parts.
NOTE 1   Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”.
NOTE 2   For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-5:2021(Main)
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
SIST EN ISO 683-5:2021

ISO 683-5:2017 gives the technical delivery requirements for
-      semi-finished products, e.g. blooms, billets, slabs (see note 1),
-      bars (see note 1),
-      wire rod,
-      hot-rolled plates (see note 2), and
-      hammer or drop forgings (see note 1)
manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2.
The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts.
The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       The term "plate" includes in the following also wide flats unless otherwise stated.
In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to this document, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
SIST EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-4:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
SIST EN ISO 683-4:2018

ISO 683-4:2016 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars and wire rod, manufactured from the free-cutting steels listed in Table 2 and supplied in one of the treatment conditions given for the different types of products in Table 1, rows 2 to 4.
It covers three groups of free-cutting steels for mechanical purposes as listed in Table 2, namely
a)    not intended for heat treatment,
b)    suitable for case-hardening, and
c)    suitable for quenching and tempering.
Free-cutting steels are often used as bright bars. For these products, refer to ISO 683‑18.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-4:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-2:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
SIST EN ISO 683-2:2018

ISO 683-2:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
       finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9).
The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-1:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
SIST EN ISO 683-1:2018

ISO 683-1:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
-      finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 9 and 11), but can also be partly used in the normalized condition (see Table 10).
The requirements for mechanical properties given in ISO 683-1:2016 are restricted to the sizes given in Tables 9 and 10.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are, in the following, covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-1 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement between the manufacturer and purchaser at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-1:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10088-2:2014(Main)
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
SIST EN 10088-2:2015

This European Standard specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.
NOTE   General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this European Standard, unless otherwise specified in this European Standard.
This European Standard does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    German language
    sale 10% off
    e-Library read for
    1 day