EN 284:2006

Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements

This European Standard specifies basic requirements for non-stackable swap bodies of class C, having a gross mass of not more than 16 t.
NOTE 1   "Swap bodies of class C" means that they are equipped with bottom fittings positioned according to the specification for 1 C (20') ISO containers (see ISO 668).
NOTE 2   Stackable swap bodies class C are specified in CEN/TS 13853.

Wechselbehälter - Nicht stapelbare Wechselbehälter der Klasse C - Maße und allgemeine Anforderungen

Diese Europäische Norm beschreibt grundlegende Anforderungen an nicht stapelbare Wechselbehälter der Klasse C mit einem Gesamtgewicht von nicht mehr als 16 t.
ANMERKUNG 1   Wechselbehälter der Klasse C bedeutet, dass die Behälter mit unteren Befestigungsbeschlägen, die den Festlegungen für ISO-Container 1 C (20') (siehe ISO 668) entsprechen, ausgerüstet sind.
ANMERKUNG 2   Stapelbare Wechselbehälter der Klasse C sind in der CEN/TS 13853 beschrieben.

Caisses mobiles - Caisses mobiles non-gerbables de classe C - Dimensions et spécifications générales

Menjalne enote (kesoni) - Menjalne enote (kesoni) tipa C, ki niso namenjene skladiščenju - Mere in splošne zahteve

General Information

• Status: Published
• Publication Date: 17-Oct-2006
• Withdrawal Date: 29-Apr-2007
• ICS: 55.180.10 - General purpose containers
• Technical Committee: CEN/TC 119 - Swap bodies for combined goods transport
• Drafting Committee: CEN/TC 119/WG 6 - Intermodal Loading Units
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 11-Feb-2021
• Ref Project: SIST EN 284:2007 - Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements

Relations

• Replaces: EN 284:1992 - Swap bodies - Swap bodies of class C - Dimensions and general requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirementsCaisses mobiles - Caisses mobiles non-gerbables de classe C - Dimensions et spécifications généralesWechselbehälter - Nicht stapelbare Wechselbehälter der Klasse C - Maße und allgemeine AnforderungenTa slovenski standard je istoveten z:EN 284:2006SIST EN 284:2007en,fr,de55.180.10General purpose containersICS:SIST EN 284:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 284:200701-januar-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 284October 2006ICS 55.180.10Supersedes EN 284:1992
English VersionSwap bodies - Non-stackable swap bodies of class C -Dimensions and general requirementsCaisses mobiles - Caisses mobiles non-gerbables declasse C - Dimensions et spécifications généralesWechselbehälter - Nicht stapelbare Wechselbehälter derKlasse C - Maße und allgemeine AnforderungenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 284:2006: E



EN 284:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Dimensions and ratings.5 4 Strength requirements.6 5 Design requirements.7 6 Optional features.14 7 Marking.15 Annex A (normative)
Bottom fittings.16 Annex B (normative)
Supporting legs with safety device.17 Bibliography.22



EN 284:2006 (E) 3 Foreword This document (EN 284:2006) has been prepared by Technical Committee CEN/TC 119 “Swap bodies for combined transport”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. This document supersedes EN 284:1992. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imple
...