EN 13126-2:2021
(Main)Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles
This document specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.
This document does not apply to the following hardware:
a) handles - primarily for Tilt and Turn, Tilt-First and Turn-Only hardware, refer to EN 13126-3;
b) sash fasteners, refer to EN 13126-14;
c) sliding closing devices, refer to EN 13126-19.
NOTE The handles covered by this document do not have a spindle and the spur is primarily used to achieve the locked closed position.
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 2: Einreiberverschlüsse
Dieses Dokument legt die Anforderungen und Prüfverfahren für die Dauerfunktionsfähigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Einreiberverschlüssen fest.
Es gilt nicht für die folgenden Baubeschläge:
a) Griffe überwiegend für Drehkipp , Kippdreh und Drehbeschläge, siehe EN 13126 3;
b) Einreiberverschlüsse für Schiebefenster, siehe EN 13126 14;
c) Schiebeverschlüsse (SCD, en: sliding closing devices), siehe EN 13126 19.
ANMERKUNG Die von diesem Dokument abgedeckten Griffe haben keinen Vierkantstift, der Sporn wird primär zum Verriegeln in geschlossener Stellung verwendet.
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 2 : Poignées à ergot de verrouillage
Le présent document spécifie les exigences et méthodes d'essai relatives à l'endurance, à la résistance, à la sécurité des biens et à la fonctionnalité des poignées à ergot de verrouillage.
Le présent document ne s'applique pas aux ferrures suivantes :
a) poignées - principalement pour ferrures d'oscillo-battant, de battant-oscillant et d'ouvrant pivotant, se reporter à l'EN 13126-3 ;
b) verrouillages à came, se reporter à l’EN 13126-14 ;
c) dispositifs de verrouillage pour ouvrants coulissants (SCD), se reporter à l’EN 13126-19.
NOTE Les poignées couvertes par le présent document sont dépourvues de carré et l’ergot est principalement utilisé pour atteindre la position fermée et verrouillée.
Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne metode - 2. del: Okenska zapirala
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13126-2:2021
01-julij-2021
Nadomešča:
SIST EN 13126-2:2011
Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne
metode - 2. del: Okenska zapirala
Building hardware - Hardware for windows and door height windows - Requirements and
test methods - Part 2: Window fastener handles
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 2: Einreiberverschlüsse
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et
méthodes d'essai - Partie 2 : Poignées à ergot de verrouillage
Ta slovenski standard je istoveten z: EN 13126-2:2021
ICS:
91.190 Stavbna oprema Building accessories
SIST EN 13126-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13126-2:2021
---------------------- Page: 2 ----------------------
SIST EN 13126-2:2021
EN 13126-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 13126-2:2011
English Version
Building hardware - Hardware for windows and door
height windows - Requirements and test methods - Part 2:
Window fastener handles
Quincaillerie pour le bâtiment - Ferrures de fenêtres et Baubeschläge - Beschläge für Fenster und Fenstertüren
portes-fenêtres - Exigences et méthodes d'essai - Partie - Anforderungen und Prüfverfahren - Teil 2:
2 : Poignées à ergot de verrouillage Einreiberverschlüsse
This European Standard was approved by CEN on 8 February 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13126-2:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13126-2:2021
EN 13126-2:2021 (E)
Contents Page
European foreword . 3
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification . 8
4.1 General . 8
4.2 Durability (1 – first box) . 8
4.3 Mass (2 – second box) . 8
4.4 Corrosion resistance (3 – third box) . 8
4.5 Test sizes (4 – fourth box) . 8
4.6 Security against burglar attack (5 – fifth box) . 8
4.7 Key related security (6 – sixth box) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.