EN 13891:2003
(Main)Tensional strapping - Guide to selection and use of tensional strapping
Tensional strapping - Guide to selection and use of tensional strapping
This European Standard gives guidance on the selection and use of steel and non-metallic tensional strapping. The term steel strapping covers flat band strapping. Non-metallic strapping covers weftless strapping and extruded thermoplastic strapping.
NOTE 1 EN 13246 specifies the breaking strength and dimensional tolerances of steel strapping and gives guidance on surface finishes of steel strapping.
NOTE 2 EN13394 specifies the dimensional tolerances and tensile properties of non-metallic tensional strapping and weftless (textile) strapping and gives guidance on surface finishes available.
Umreifungsbänder - Auswahl und Anwendung
Die vorliegende Norm EN xxxxx gibt Hilfe und Anleitung bei der Auswahl und Verwendung von Stahl- und nichtmetallischen Umreifungsbändern. Der Ausdruck "Stahlumreifungsband" bezieht sich auf Flachband. Nichtmetallische Umreifungsbänder sind solche aus gewebefreien Bändern und extrudierten, thermoplastischen Umreifungsbändern.
Feuillards de cerclage - Guide pour la sélection et l'utilisation des feuillards de cerclage
La présente Norme européenne donne un certain nombre de directives sur la sélection et l'utilisation de feuillards de cerclage d'acier et non métalliques. Le terme feuillard d'acier couvre les feuillards à bande plate. Les feuillards non métalliques couvrent les feuillards textiles sans trame et les feuillards en thermoplastique extrudé.
NOTE 1 L'EN 13246 spécifie la résistance à la rupture et les tolérances dimensionnelles des feuillards d'acier et donne des directives sur les finis de surface des feuillards d'acier.
NOTE 2 L'EN 13394 spécifie les tolérances dimensionnelles et les propriétés mécaniques de traction des feuillards de cerclage non métalliques et des feuillards (textiles) sans trame, et donne des directives sur les finis de surface disponibles.
Povezovalni trakovi – Vodilo za izbiro in uporabo povezovalnih trakov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Povezovalni trakovi – Vodilo za izbiro in uporabo povezovalnih trakovUmreifungsbänder - Auswahl und AnwendungFeuillards de cerclage - Guide pour la sélection et l'utilisation des feuillards de cerclageTensional strapping - Guide to selection and use of tensional strapping55.040SDNLUDQMHPackaging materials and accessoriesICS:Ta slovenski standard je istoveten z:EN 13891:2003SIST EN 13891:2003en01-oktober-2003SIST EN 13891:2003SLOVENSKI
STANDARD
SIST EN 13891:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13891June 2003ICS 55.040English versionTensional strapping - Guide to selection and use of tensionalstrappingCerclages sous tension - Guide pour la sélection etl'utilisation de cerclages sous tensionUmreifungsbänder - Auswahl und AnwendungThis European Standard was approved by CEN on 21 April 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13891:2003 ESIST EN 13891:2003
EN 13891:2003 (E)2ContentsForeword.31Scope.42General.43Types of equipment.54Methods of joining under tension.65Strength of joint.66Physical properties and usage characteristics.67Application.88Choice of tensional strapping.8Bibliography.18SIST EN 13891:2003
EN 13891:2003 (E)3ForewordThis document (EN 13891:2003) has been prepared by Technical Committee CEN/TC 261 "Packaging", thesecretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby December 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13891:2003
EN 13891:2003 (E)41 ScopeThis European Standard gives guidance on the selection and use of steel and non-metallic tensional strapping.The term steel strapping covers flat band strapping. Non-metallic strapping covers weftless strapping and extrudedthermoplastic strapping.NOTE 1EN 13246 specifies the breaking strength and dimensional tolerances of steel strapping and gives guidance onsurface finishes of stee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.