EN ISO 11925-2:2010

Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010)

ISO 11925-2:2010 specifies a method of test for determining the ignitability of products by direct small flame impingement under zero impressed irradiance using vertically oriented test specimens.

Prüfungen zum Brandverhalten - Entzündbarkeit von Produkten bei direkter Flammeneinwirkung - Teil 2: Einzelflammentest (ISO 11925-2:2010)

Dieser Teil von ISO 11925 legt ein Prüfverfahren fest, um die Entzündbarkeit von Produkten, die in vertikaler
Anordnung geprüft werden, mit Hilfe einer direkt einwirkenden kleinen Flamme ohne zusätzliche
Wärmebestrahlung zu ermitteln.
Hinweise zur Messunsicherheit des Prüfverfahrens sind Anhang A zu entnehmen.

Essais de réaction au feu - Allumabilité de produits soumis à l'incidence directe de la flamme - Partie 2: Essai à l'aide d'une source à flamme unique (ISO 11925-2:2010)

L'ISO 11925-2:2010 spécifie une méthode d'essai permettant de déterminer l'allumabilité des produits par incidence directe d'une petite flamme sous éclairement énergétique nul, en utilisant des éprouvettes en position verticale.

Preskusi odziva na ogenj - Sposobnost vžiga gradbenih proizvodov v neposrednem stiku s plamenom - 2. del: Preskus z enim gorilnikom (ISO 11925-2:2010)

Ta del ISO 11925 določa metodo preskusa za določanje sposobnosti vžiga proizvodov pri neposrednem stiku z majhnim plamenom in pri ničnih sledeh žarenja z uporabo navpično obrnjenih vzorcev. Informacije o natančnosti preskusne metode so podane v dodatku A.

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2010
• Withdrawal Date: 10-Mar-2020
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• ICS: 91.060.01 - Elements of buildings in general
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: CEN/TC 127 - Fire safety in buildings
• Drafting Committee: CEN/TC 127 - Fire safety in buildings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Mar-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/088 - CPD: Reaction to fire
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN ISO 11925-2:2011 - Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010)

Relations

• Replaces: EN ISO 11925-2:2002 - Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2002)
• Effective Date: 13-Nov-2010
• Replaced By: EN ISO 11925-2:2020 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
• Effective Date: 24-Mar-2020
• Corrected By: EN ISO 11925-2:2010/AC:2011 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test - Technical Corrigendum 1 (ISO 11925-2:2010/Cor 1:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11925-2:2011
01-marec-2011
1DGRPHãþD
SIST EN ISO 11925-2:2002
SIST ISO 11925-2:1998
SIST ISO 11925-2:1998/Cor.1:1999
Preskusi odziva na ogenj - Sposobnost vžiga gradbenih proizvodov v
neposrednem stiku s plamenom - 2. del: Preskus z enim gorilnikom (ISO 11925-
2:2010)
Reaction to fire tests - Ignitability of building products subjected to direct impingement of
flame - Part 2: Single-flame source test (ISO 11925-2:2010)
Prüfungen zum Brandverhalten von Baustoffen - Entzündbarkeit von Bauprodukten bei
direkter Flammeneinwirkung - Teil 2: Einflammtest (ISO 11925-2:2010)
Essais de réaction au feu - Allumabilité des produits de bâtiment soumis à l'incidence
directe de la flamme - Partie 2: Essai à l'aide d'une source à flamme unique (ISO 11925-
2:2010)
Ta slovenski standard je istoveten z: EN ISO 11925-2:2010
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
SIST EN ISO 11925-2:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11925-2:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 11925-2:2011


EUROPEAN STANDARD
EN ISO 11925-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 13.220.50 Supersedes EN ISO 11925-2:2002
English Version
Reaction to fire tests - Ignitability of products subjected to direct
impingement of flame - Part 2: Single-flame source test (ISO
11925-2:2010)
Essais de réaction au feu - Allumabilité de produits soumis Prüfungen zum Brandverhalten - Entzündbarkeit von
à l'incidence directe de la flamme - Partie 2: Essai à l'aide Produkten bei direkter Flammeneinwirkung - Teil 2: Einzel-
d'une source à flamme unique (ISO 11925-2:2010) Flammentest (ISO 11925-2:2010)
This European Standard was approved by CEN on 2 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11925-2:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11925-2:2011
EN ISO 11925-2:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11925-2:2011
EN ISO 11925-2:2010 (E)
Foreword
This document (EN ISO 11925-2:2010) has been prepared by Technical Committee ISO/TC 92 "Fire safety" in
collaboration with Technical Committee CEN/TC 127 “Fire safety in buildings” the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11925-2:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11925-2:2010 has been
...