EN ISO 5210:2023
(Main)Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
This document specifies the requirements for the attachment of multi-turn actuators to valves.
Throughout this document, “actuator” can be understood as “actuator and/or gearbox” providing a multi-turn and/or linear output.
It specifies:
— flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)];
— those driving component dimensions of actuators which are necessary to attach them to the driven components;
— reference values for torque and thrust for flanges having the dimensions specified in this document.
Industriearmaturen - Anschlüsse von Drehantrieben für Armaturen (ISO 5210:2023)
Dieses Dokument legt die Anforderungen für den Anschluss von Drehantrieben an Armaturen fest.
In diesem Dokument kann „Stellantrieb“ als „Stellantrieb und/oder Getriebe“ betrachtet werden, sofern es sich um einen Dreh- und/oder Linearantrieb handelt.
Es legt Folgendes fest:
die Maße der Flansche, die für den Anschluss von Stellantrieben an Industriearmaturen [siehe Bild 1 a)] oder an Zwischenstücke [siehe Bild 1 b)] notwendig sind;
die Maße der antreibenden Teile von Stellantrieben, die notwendig sind, um diese mit den angetriebenen Teilen zu verbinden;
die Bezugswerte für Drehmoment und Schubkraft für Flansche mit den in diesem Dokument festgelegten Maße.
Robinetterie industrielle - Raccordement des actionneurs multitours aux appareils de robinetterie (ISO 5210:2023)
Le présent document prescrit les exigences de raccordement des actionneurs multitours aux appareils de robinetterie.
Tout au long du présent document, le terme «actionneur» peut être compris comme «actionneur et/ou réducteur» fournissant une sortie multitours et/ou linéaire.
Il prescrit:
— les dimensions des brides nécessaires pour le raccordement des actionneurs aux appareils de robinetterie industrielle [voir Figure 1 a)] ou aux supports intermédiaires [voir Figure 1 b)];
— les dimensions des éléments d'entraînement des actionneurs nécessaires à leur accouplement aux éléments entraînés;
— les valeurs de référence du couple et de la poussée pour les brides ayant les dimensions spécifiées dans le présent document.
Industrijski ventili - Priključki vrtilnih pogonov na ventilih (ISO 5210:2023)
Standard ISO 5210:2017 določa zahteve za priključitev vrtilnih pogonov na ventile.
V tem dokumentu lahko izraz »pogon« pomeni »pogon in/ali menjalnik«, ki omogoča vrtilni in/ali linearni izhod.
Standard ISO 5210:2017 določa:
– dimenzije prirobnic, ki so potrebne za priključitev pogonov na industrijske ventile [glej sliko 1 a)] ali vmesne podpore [glej sliko 1 b)];
– dimenzije pogonskih komponent pogonov, ki so potrebne za njihovo priključitev na pogonske komponente;
– referenčne vrednosti za navor in potisk za prirobnice z dimenzijami, določenimi v tem dokumentu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5210:2023
01-december-2023
Industrijski ventili - Priključki vrtilnih pogonov na ventilih (ISO 5210:2023)
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
Industriearmaturen - Anschlüsse von Drehantrieben für Armaturen (ISO 5210:2023)
Robinetterie industrielle - Raccordement des actionneurs multitours aux appareils de
robinetterie (ISO 5210:2023)
Ta slovenski standard je istoveten z: EN ISO 5210:2023
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN ISO 5210:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5210:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 5210:2023
EN ISO 5210
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 23.060.99 Supersedes EN ISO 5210:2017
English Version
Industrial valves - Multi-turn valve actuator attachments
(ISO 5210:2023)
Robinetterie industrielle - Raccordement des Industriearmaturen - Anschlüsse von Drehantrieben
actionneurs multitours aux appareils de robinetterie für Armaturen (ISO 5210:2023)
(ISO 5210:2023)
This European Standard was approved by CEN on 9 September 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5210:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5210:2023
EN ISO 5210:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5210:2023
EN ISO 5210:2023 (E)
European foreword
This document (EN ISO 5210:2023) has been prepared by Technical Committee ISO/TC 153 "Valves" in
collaboration with Technical Committee CEN/TC 69 “Industrial valves” the secretariat of which is held
by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5210:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5210:2023 has been approved by CEN as EN ISO 5210:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 5210:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 5210:2023
INTERNATIONAL ISO
STANDARD 5210
Third edition
2023-09
Industrial valves — Multi-turn valve
actuator attachments
Robinetterie industrielle — Raccordement des ac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.