EN 471:2003/prA1
(Amendment)High-visibility warning clothing for professional use - Test methods and requirements
High-visibility warning clothing for professional use - Test methods and requirements
Modification of clause 5.3 , 5.6, annex B of EN 471:2003
Warnkleidung - Prüfverfahren und Anforderungen
Vêtements de signalisation à haute visibilité pour usage professionnel - Méthodes d'essai et exigences
Dobro vidna opozorilna obleka za poklicno uporabo – Preskusne metode in zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 471:2003/oprA1:2006
PREDSTANDARD
februar 2006
Dobro vidna opozorilna obleka za poklicno uporabo – Preskusne metode in
zahteve
High-visibility warning clothing for professional use - Test methods and
requirements
ICS 13.340.10 Referenčna številka
SIST EN 471:2003/oprA1:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN 471:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2005
ICS
English Version
High-visibility warning clothing for professional use - Test
methods and requirements
Vêtements de signalisation à haute visibilité pour usage Warnkleidung - Prüfverfahren und Anforderungen
professionnel - Méthodes d'essai et exigences
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.
This draft amendment A1, if approved, will modify the European Standard EN 471:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 471:2003/prA1:2005:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 471:2003/prA1:2005 (E)
Contents Page
Foreword.3
1 Modification to Subclause 5.3 Colour fastness of background material and non-
fluorescent material after test exposure .4
2 Modification to Subclause 5.3.1 Colour fastness to rubbing.4
3 Modification to Subclause 5.3.3 Colour fastness - when laundered, dry cleaned,
hypochlorite bleached and hot pressed.4
4 Modification to Subclause 5.6 Water vapour resistance and water vapour permeability
index.5
5 Modification to Subclause 5.6.2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.