This document specifies the requirements and test methods for ergonomics, innocuousness, comfort/sizing, restraint, ability to limit wrist extension and attenuate impact force on the palm as well as provisions for marking and instructions supplied by the manufacturer for wrist protectors for all users of snowboard equipment.
It does not apply to protectors used in roller sports, alpine skiing, or other sports. This document does not address protection for the forearm due to axial forces caused ...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment’s against thermal risks for professional use, consumer, domestic use.
This document is also applicable to arm protective equipment.
It is used for all gloves and other hand protective equipment’s which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small sp...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This document describes some of the test methods for use with EN 17092 protective garments for motorcycle riders (Part 2 and following parts). It describes the appropriate test methods for zoning, ergonomics, mechanical properties and impact abrasion resistance.

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves.
It can also apply to arm protectors and gloves permanently incorporated in containment enclosures.
Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document.
This document does not address the p...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for motorcyclists’ protective garments of Class AAA: protective garments, which are intended to provide limited protection to the wearer against abrasion and impact injury. It applies to protective garments for motorcycle on-road use.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for motorcyclists’ protective garments of Class AA: protective garments, which are intended to provide limited protection to the wearer against abrasion and impact injury. It applies to protective garments for motorcycle on-road use.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies general requirements for motorcyclists’ protective garments of Class B: protective garments, which are intended to provide limited protection to the wearer against abrasion injury. It applies to protective garments for motorcycle on-road use.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for motorcyclists’ protective garments of Class C, worn as under or overgarments, intended to provide limited protection to the wearer against impact injury. It applies to protective garments for motorcycle on-road use.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for motorcyclists’ protective garments of Class A: protective garments, which are intended to provide limited protection to the wearer against abrasion and impact injury. It applies to protective garments for motorcycle on-road.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This standard specifies the properties of protective clothing that minimize the risk of its entanglement or drawing-in by moving parts when the wearer is working at or near hazardous moving machines or devices. This standard does not include protective clothing against injuries by special moving machine parts for which specific standards exist, e.g. protective clothing for users of chainsaws.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This International Standard establishes minimum performance, classification, and labelling requirements
for protective clothing worn by operators handling liquid pesticide products as well as re-entry workers. Pesticide
handling includes application of diluted formulations, mixing and loading, and other activities such as cleaning
of contaminated equipment and containers. Protective clothing covered by this International Standard
includes, but is not limited to, shirts, jackets, trousers, covera...
view more

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the Sweating Torso as a method to
measure the coupled heat and mass transfer through protective clothing
in fire fighters’ specific conditions.
NOTE The Sweating Torso is developed to perform highly reproducible
laboratory tests for heat and mass transfer on clothing systems under
controlled conditions which are closely correlated to real conditions. The
Sweating Torso is a cylinder with the same size as a human trunk. The
layers of the measurement cylinder are ...
view more

    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

This document specifies the test method for the determination of the resistance of protective glove materials to degradation by dangerous chemicals with continuous contact.
NOTE Annex A gives information on interlaboratory test results on this method.
It is preferable that other tests used in addition to the evaluation of chemical resistance such as permeation resistance and penetration, as the chemical test do not provide sufficient information on the physical property changes affecting a glo...
view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for the penetration resistance of gloves that protect against dangerous chemicals and/or micro-organisms.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European standard describes a thermophysiological model (thermal
human simulator) that uses the output data of the first part to obtain
physiological heat load criteria that predicts the (maximal) duration of
work in the protective clothing in fire fighters’ relevant conditions.
NOTE The human simulator method using the Sweating Torso (i.e.
coupling of the instrumented manikin with a thermo-physiological
feedback model) is validated for different scenarios by comparison to
human subject tri...
view more

    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements, test methods, design requirements, identification and marking information for gloves that offer protection against cutting by hand-held chainsaws.
Guidance on chainsaw use and the selection of gloves is given in Annex A.

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements, test methods, design requirements, identification and marking information for leg protectors that offer protection against cutting by hand-held chainsaws.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements, test methods, design requirements, identification and marking information for upper body protectors that offer protection against cutting by hand-held chainsaws.
It also specifies procedures for sampling and pre-treatment of upper body protectors, the measurement of the protective coverage, the apparatus and test methods for assessing resistance to cutting, and the practical performance test for evaluating ergonomic properties.
Guidance on ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and test methods for assessing the resistance to cutting of gaiters by hand-held chainsaws and other properties. It includes a requirement and a test method for assessing the strength of underfoot straps of gaiters.
This document is applicable to gaiters used in conjunction with safety footwear with a steel toecap conforming to ISO 20345 design "C" or "D". These gaiters are designed to be used only in association with a defined model of footwear and tested t...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the minimum requirements, test methods, marking and information supplied by the manufacturer for ventilated and non-ventilated gas-tight chemical protective suits.
It specifies full body personal protective ensembles to be worn for protection against solid, liquid and gaseous chemicals, including liquid and solid aerosols.
This standard does not establish minimum criteria for protection for non-chemical hazards, e.g. radiological, fire, heat, explosive hazards,...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This document specifies the minimum requirements, test methods, marking and information supplied by the manufacturer, for ventilated and non-ventilated gas-tight chemical protective suits for use by emergency teams (ET).
It specifies full body personal protective ensembles to be worn for protection against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Chemicals such as violently air sensitive reagents, unstable explosives and cryogenic liquids have not been considere...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods applicable to ready-made garments, materials and seams of protective clothing against the influence of precipitation (e.g. rain, snowflakes), fog and ground humidity.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document provides guidance to the employers or persons advising them such as suppliers of PPE or services, inspection, insurance companies etc.) in taking the necessary decisions regarding the selection, use, care and maintenance of protective clothing against foul weather, wind and cold, and is compliant with the applicable European legislation.
This document is not exhaustive in addressing all the safety concerns associated with the use of compliant protective equipment for protection ag...
view more

    • sale 10% off
    • Technical report
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the minimum coverage to be provided by motorcyclists’ chest protectors. This European Standard contains the requirements for the performance of the protectors under impact and details of the test methods, requirements for sizing, ergonomic requirements, and requirements for innocuousness, labelling and the provision of information.
Note that this European Standard defines a product which provides limited protection against mechanical impacts and falls to the che...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a test method for the determination of the resistance of protective
clothing, gloves and footwear materials to permeation by potentially hazardous gaseous chemicals
under the condition of continuous contact.
This test method is applicable to the assessment of protection against gazeous chemicals that can be
collected only by liquid or gaseous collecting media.
!This test method is not applicable for the assessment of gaseous chemical mixtures."
This test me...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This document provides guidance to the employers, users and purchasers with respect to selection, use, care, and maintenance requirements for protective clothing against heat and flame and is compliant with the European legislation.
This document is not exhaustive in addressing all the safety concerns associated with the use of compliant protective equipment for protection against heat and flames and other related risks.
It is essential not to construe this document as addressing all the safet...
view more

    • sale 10% off
    • Technical report
      68 pages
      English language
    • e-Library read for
      1 day

This document specifies test methods for assessing the resistance of footwear to cutting by hand-held chainsaws.
This document is applicable only to footwear with integral protection.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a test method for the determination of the resistance of protective clothing, gloves and footwear materials to permeation by potential hazardous liquid chemicals under the condition of continuous contact.
This test method is applicable to the assessment of protection against liquid chemicals that can be collected only by liquid or gaseous collecting media.
This test method is not adapted for the assessment of chemical mixtures, except for aqueous solutions.
Th...
view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This document specifies the test rig for assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws. It also describes the calibration procedure.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies material and design requirements for electrostatic dissipative protective clothing, including hoods and caps, used as part of a total earthed system, to avoid incendiary discharges, where the minimum ignition energy of an explosive atmosphere is not less than 0,016 mJ.
In the context of this European Standard, a total earthed system is one in which personnel and other conductors are connected to earth via a resistance of less than 108 Ω.
The material and design...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for protective clothing, ventilated by an independent supply of air from an uncontaminated source, protecting the body and the respiratory system of the wearer against solid airborne particles including radioactive contamination. This kind of protective clothing can be provided with an emergency breathing facility.
This European Standard does not apply for the protection against ionizing radiation and the protection of patients ...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This document provides a test method for evaluating the physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a series of simulated activities (phases) under defined ambient conditions. This standard test method characterizes the essential properties of fabric assemblies of a representative garment or clothing ensemble for thermo-physiological assessment:
— dry thermal insulation;
— cooling properties during average metabolic activity and moisture...
view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well...view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for evaluating the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a simulated activity under defined relevant conditions for firefighters.
This document is intended to be used to assess the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles but not the risk for heat stress due to actual fire conditions. The results of this test method can be used as...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for the coverage, sizing, adaptability and adjustability, restraint, ergonomics, construction, innocuousness, and performance under impact to be provided by protective jackets, body and shoulder protectors to be worn by children, youths and adults of either sex while riding horses, working with horses, driving horses or being a passenger in a horse driven vehicle.
These protectors are intended to provide some protection against ...
view more

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the construction and performance of actively heated suits and actively cooled suits or components thereof, for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information meant to be provided at the point of sale and instructions for use are also specified.
Laboratory and practical performance tests are specified.

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the construction and performance requirements (including thermal) of wet suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information meant to be provided at the point of sale, and instructions for use are also specified.
Laboratory and practical performance tests are specified.
Short sleeve jackets, short-leg trousers, under- and overgarments, and separate accessories such as gloves, hoods and boots...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the construction and performance of dry suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information meant to be provided at the point of sale and instructions for use are also specified.
Laboratory and practical performance tests are specified.

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This Technical Report is primarily intended for users, specifiers and others with responsibility for the procurement and provision of chemical protective clothing. It is also intended to be used by manufacturers in their dialogue with the users of PPE.
This Technical Report is intended to clarify the inter-relationship of the set of standards, developed by CEN/TC 162 WG 3, and to explain the main ideas behind these standards. This set of standards has been developed in support of the European l...
view more

    • sale 10% off
    • Technical report
      48 pages
      English language
    • e-Library read for
      1 day

ISO 27065 establishes minimum performance, classification, and marking requirements for protective clothing worn by operators handling pesticide products as well as re-entry workers. For the purpose of ISO 27065, the term pesticide applies to insecticides, herbicides, fungicides, and other substances applied in liquid form that are intended to prevent, destroy, repel, or reduce any pest or weeds in agricultural settings, green spaces, roadsides, etc. It does not include biocidal products used fo...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

ISO 19918 describes laboratory test methods to determine the resistance of materials, closures, and seams used in personal protective equipment (PPE) to permeation by solid or liquid chemicals with low vapour pressure (less than 133,322 Pa at 25 °C) and/or insolubility in water or other liquids commonly used as collection media. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is s...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This European standard specifies additional test methods and requirements for face protectors, used in the practice of karate.
This European Standard is not applicable for other sports equipment and protectors except face protectors for karate because the test methods and requirements are very specific for karate face protectors and do not meet the characteristics of face protectors for other sports.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for the performance of clothing ensembles (i.e. g two piece suits or coveralls) for protection against the effects of cold environments equal to or below −5°C (see Annex C). These effects comprise not only low air temperatures but also humidity and air velocity.
Requirements and test methods of garments for protection against cool environments are specified in EN 14058.
The protective effects and requirements of footwear, gloves an...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations to protect against heat and fire. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 13506-1:2017 specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment.
This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. Any material construction such as coated, quilted or sandwich can be used. The...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the minimum requirements for technical rescue clothing.
Technical rescues involves work associated with the environments, and conditions associated with operational scenarios such as but not limited to those found during road traffic collisions and when working in and around collapsed structures often for extended periods of time after natural disasters (earthquake, landslides, etc.) where protection against mechanical risks, limited heat and flame and conspicui...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

ISO 15025:2016 specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of vertically oriented flexible materials in the form of single or multicomponent fabrics (coated, quilted, multilayered, sandwich constructions and similar combinations), when subjected to a small defined flame. This test standard does not apply to situations where there is restricted air supply or exposure to large sources of intense heat, for which other test methods are...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day