iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 15212:2006

(Main)

Health informatics - Vocabulary - Maintenance procedure for a web-based terms and concepts database

Health informatics - Vocabulary - Maintenance procedure for a web-based terms and concepts database

This document describes the general requirements on a terms and concepts database. This document also proposes a maintenance procedure for CEN/TC 251, the content, structure and user interface to a web-based terms- and concepts database that will compile the defined concepts with their preferred terms and definitions from the standards developed by
CEN/TC 251. These are terms from the health informatics field and not all terms and concepts used in healthcare.
It also describes an example of an implementation and ends with a proposal for CEN/TC 251 for the establishment and maintenance of such a terms and concepts database.

Medizinische Informatik - Vokabular - Verfahren zur Pflege von webbasierten Datenbanken für Benennungen und Begriffe

Informatique de santé - Vocabulaire Informatique Médical - Procédure de maintenance

Zdravstvena informatika - Slovar - Postopek vzdrževanja za spletno bazo izrazov in pojmov

General Information

Status
Published
Publication Date
10-Oct-2006
ICS
01.040.35 - Information technology (Vocabularies)
35.240.80 - IT applications in health care technology
Technical Committee
CEN/TC 251 - Medical informatics
Drafting Committee
CEN/TC 251/WG 1 - Information models
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Oct-2006
Completion Date
11-Oct-2006
Ref Project
SIST-TP CEN/TR 15212:2006 - Health informatics - Vocabulary - Maintenance procedure for a web-based terms and concepts database

Relations

Replaces
ENV 12017:1997 - Medical Informatics - Medical Informatics Vocabulary (MIVoc)
Effective Date
22-Dec-2008

Buy Standard

TP CEN/TR 15212:2006TP CEN/TR 15212:2006
PreviousNext
Technical report
TP CEN/TR 15212:2006
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15212:2006
01-december-2006
1DGRPHãþD
SIST ENV 12017:2003
Zdravstvena informatika - Slovar - Postopek vzdrževanja za spletno bazo izrazov in
pojmov
Health informatics - Vocabulary - Maintenance procedure for a web-based terms and
concepts database
Medizinische Informatik - Vokabular - Verfahren zur Pflege von webbasierten
Datenbanken für Benennungen und Begriffe
Informatique de santé - Vocabulaire Informatique Médical - Procédure de maintenance
Ta slovenski standard je istoveten z: CEN/TR 15212:2006
ICS:
01.040.35 Informacijska tehnologija. Information technology.
Pisarniški stroji (Slovarji) Office machines
(Vocabularies)
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST-TP CEN/TR 15212:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL REPORT
CEN/TR 15212
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
October 2006
ICS 01.040.35; 35.240.80 Supersedes ENV 12017:1997
English Version
Health informatics - Vocabulary - Maintenance procedure for a
web-based terms and concepts database
Informatique de santé - Vocabulaire Informatique Médical - Medizinische Informatik - Vokabular - Verfahren zur Pflege
Procédure de maintenance von webbasierten Datenbanken für Benennungen und
Begriffe
This Technical Report was approved by CEN on 8 August 2005. It has been drawn up by the Technical Committee CEN/TC 251.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15212:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TR 15212:2006 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope .5
2 Abbreviations.5
3 Strategy for defining a Terms and Concepts database.5
4 General requirements on a language for notation of concept models.6
5 Proposal for a CEN/TC 251 Terms and Concepts database .9
Annex A .11
Annex B A semantic model for terminology (semantic meta model) .18
Annex C Explanatory comments to Figure 1.20
Annex D Definitions of concepts for healthcare, from a healthcare record
perspective.21

2

---------------------- Page: 3 ----------------------

CEN/TR 15212:2006 (E)
Foreword
This Technical Report (CEN/TR 15212:2006) has been prepared by Technical Committee
CEN/TC 251 “Health Informatics”, the secretariat of which is held by NEN.
This document supersedes ENV 12017:1997.
3

---------------------- Page: 4 ----------------------

CEN/TR 15212:2006 (E)
Introduction
The need for a coherent and precise terminology in health informatics is obvious. The overall
problem of supplying concept systems and reference terminologies with international scope
for all of healthcare information is gigantic but is approached by different organisations and
strategies where formal standardization aims for a facilitating role.
This document addresses the much more limited problem of the terminology of informatics
and in particular the terminology used in health informatics standards. Vocabulary
harmonisation across standards in the field is an important quality requirement and with the
growing complexity of health inf
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11073-10101:2020(Main)
Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomenclature (ISO/IEEE 11073-10101:2020)
SIST EN ISO 11073-10101:2021

This document defines a nomenclature for communication of information from point-of-care medical devices. Primary emphasis is placed on acute care medical devices and patient vital signs information. The nomenclature also supports concepts in an object-oriented information model that is for medical device communication.

  • Standard
    1066 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13940-2(Main)
Health informatics - System of concepts to support continuity of care - Part 2: Health care process and workflow
oSIST prEN 13940-2:2010

The purpose of this European Standard is to enable communication at the semantic level between information systems in health care. This part standard complements Part 1. Its specific purpose is to define a system of concepts enabling the management, including communication, of the necessary information about the core process of health care provision to an individual subject of care and the corresponding workflow, so as to support its continuity, taking into consideration decision processes, quality control, and resource management. It provides the terminology for planning, delivery and follow-up of those activities that form the overall process.
This part standard applies a process modelling technique to identify the process objects, activities and sub-processes. It also takes into consideration the resource aspects, the responsibilities of health care providers, and means for patients' participation. Whenever continuity of health care delivery implies social interventions as part of, or in support to, the process towards health recovery, these are to be mentioned wherever relevant in the process and workflow; but addressing those social interventions in depth is not part of the scope of this European Standard.

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11073-10101:2020(Main)
Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomenclature (ISO/IEEE 11073-10101:2020)
SIST EN ISO 11073-10101:2021

This document defines a nomenclature for communication of information from point-of-care medical devices. Primary emphasis is placed on acute care medical devices and patient vital signs information. The nomenclature also supports concepts in an object-oriented information model that is for medical device communication.

  • Standard
    1066 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13940-2(Main)
Health informatics - System of concepts to support continuity of care - Part 2: Health care process and workflow
oSIST prEN 13940-2:2010

The purpose of this European Standard is to enable communication at the semantic level between information systems in health care. This part standard complements Part 1. Its specific purpose is to define a system of concepts enabling the management, including communication, of the necessary information about the core process of health care provision to an individual subject of care and the corresponding workflow, so as to support its continuity, taking into consideration decision processes, quality control, and resource management. It provides the terminology for planning, delivery and follow-up of those activities that form the overall process.
This part standard applies a process modelling technique to identify the process objects, activities and sub-processes. It also takes into consideration the resource aspects, the responsibilities of health care providers, and means for patients' participation. Whenever continuity of health care delivery implies social interventions as part of, or in support to, the process towards health recovery, these are to be mentioned wherever relevant in the process and workflow; but addressing those social interventions in depth is not part of the scope of this European Standard.

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day