EN 17763:2022
(Main)Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
This document specifies the procedure for the determination of the certified flow rate (CFR), a performance parameter for centrifuges, at specific fuel oil viscosities using a defined test oil and a defined test procedure.
This document is applicable to marine fuel centrifuges.
All values reported as CFR capacities are verified measured values on a defined CFR test bench.
Separation efficiency is determined by a defined particle counting method.
Scaling based on Stoke’s law and disc stack design is excluded from this document.
Zentrifugen - Zentrifugen für Schiffskraftstoffe - Bestimmung der Partikelabscheideleistung und der zertifizierten Durchflussrate (CFR) unter definierten Testbedingungen
Dieses Dokument legt das Verfahren zur Bestimmung der zertifizierten Durchflussrate (CFR), eines Leistungsparameters für Zentrifugen, bei spezifischen Schwerölviskositäten unter Zuhilfenahme eines definierten Prüföls und eines definierten Prüfverfahrens fest.
Dieses Dokument ist anwendbar auf Zentrifugen für Schiffskraftstoffe.
Alle als CFR-Kapazitäten angegebenen Werte sind verifizierte Messwerte, die an einem definierten CFR-Prüfstand erlangt wurden.
Die Abscheideleistung wird durch eine definierte Partikelzählmethode bestimmt.
Skalierung basierend auf dem Stokes'schen Gesetz sowie Tellerkonstruktionen werden in diesem Dokument nicht behandelt.
Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des performances de séparation des particules et du débit certifié (CFR) dans des conditions d'essai définies
Le présent document spécifie le mode opératoire permettant de déterminer le débit certifié (CFR), un paramètre de performance pour les centrifugeuses, à des viscosités d'huile lourde spécifiques, en utilisant une huile d'essai définie et un mode opératoire d'essai défini.
Le présent document s'applique aux centrifugeuses à combustible pour la marine.
Toutes les valeurs déclarées comme des capacités CFR sont des valeurs mesurées vérifiées sur un banc d'essai CFR défini.
L'efficacité de séparation est déterminée par une méthode de comptage des particules définie.
La mise à l'échelle fondée sur la loi de Stokes et la conception de la pile de disques est exclue du présent document.
Centrifuge - Centrifuge za ladijska goriva - Določanje učinkovitosti ločevanja delcev in certificirane stopnje pretoka (CFR) pod določenimi preskusnimi pogoji
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17763:2022
01-december-2022
Centrifuge - Centrifuge za ladijska goriva - Določanje učinkovitosti ločevanja
delcev in certificirane stopnje pretoka (CFR) pod določenimi preskusnimi pogoji
Centrifuges - Marine fuel centrifuges - Determination of particle separation performance
and certified flow rate (CFR) under defined test conditions
Zentrifugen - Zentrifugen für Schiffskraftstoffe - Bestimmung der
Partikelabscheideleistung und der zertifizierten Durchflussrate (CFR) unter definierten
Testbedingungen
Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des
performances de séparation des particules et du débit certifié (CFR) dans des conditions
d'essai définies
Ta slovenski standard je istoveten z: EN 17763:2022
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
SIST EN 17763:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17763:2022
---------------------- Page: 2 ----------------------
SIST EN 17763:2022
EN 17763
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 47.020.20; 47.020.30
English Version
Centrifuges - Marine fuel centrifuges - Determination of
particle separation performance and certified flow rate
(CFR) under defined test conditions
Centrifugeuses - Centrifugeuses à combustible pour la Zentrifugen - Zentrifugen für Schiffskraftstoffe -
marine - Détermination des performances de Bestimmung der Partikelabscheideleistung und der
séparation des particules et du débit certifié (CFR) zertifizierten Durchflussrate (CFR) unter definierten
dans des conditions d'essai définies Testbedingungen
This European Standard was approved by CEN on 29 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17763:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17763:2022
EN 17763:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test arrangements . 6
4.1 Test equipment . 6
4.2 Test media . 8
4.2.1 Test oil specification . 8
4.2.2 Test oil kinematic viscosity . 8
4.2.3 Test oil density .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.