EN ISO/IEC 15421:2024
(Main)Information technology - Automatic identification and data capture techniques - Bar code master test specifications (ISO/IEC 15421:2010)
Information technology - Automatic identification and data capture techniques - Bar code master test specifications (ISO/IEC 15421:2010)
ISO/IEC 15421:2010 specifies the requirements and test methods for physical and related attributes of a bar code master. It covers all forms of bar code master, irrespective of the mode of origination of the initial image, intended for reproduction by conventional printing processes. ISO/IEC 15421:2010 does not cover processes in which there is no master, such as computer to plate (CTP).
Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung - Testspezifikationen für Strichcode-Master (ISO/IEC 15421:2010)
Dieses internationale Dokument legt die Anforderungen und Prüfverfahren für physikalische und damit in Zusammenhang stehende Eigenschaften eines Strichcode-Masters fest. Sie umfasst alle Arten von Strichcode-Mastern, unabhängig von der Art der Entstehung des ursprünglichen Bilds, das zur Vervielfältigung mittels üblicher Druckverfahren verwendet werden soll. Diese internationale Norm deckt keine Verfahren ab, in denen es keinen Master gibt, wie z. B. die digitale Druckplattenbelichtung (CTP, en: computer to plate).
Technologies de l'information - Techniques automatiques d'identification et de capture des données - Spécifications pour essai des codes à barres de base (ISO/IEC 15421:2010)
La présente Norme internationale spécifie les exigences et les méthodes d’essai pour les attributs physiques et associés d’un code à barres de base. Elle couvre toutes les formes de code à barres de base, quel que soit le mode d’obtention de l’image initiale, destinées à la reproduction via des procédés d’impression conventionnels. La présente Norme internationale ne couvre pas les procédés pour lesquels il n’y a pas de code à barres de base, par exemple le computer-to-plate (CTP, «ordinateur vers plaque»).
Informacijska tehnologija - Tehnike za samodejno razpoznavanje in zajem podatkov - Specifikacije za glavni preskus črtnih kod (ISO/IEC 15421:2010)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/IEC 15421:2024
01-junij-2024
Nadomešča:
SIST EN ISO/IEC 15421:2003
Informacijska tehnologija - Tehnike za samodejno razpoznavanje in zajem
podatkov - Specifikacije za glavni preskus črtnih kod (ISO/IEC 15421:2010)
Information technology - Automatic identification and data capture techniques - Bar code
master test specifications (ISO/IEC 15421:2010)
Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung -
Testspezifikationen für Strichcode-Master (ISO/IEC 15421:2010)
Technologies de l'information - Techniques automatiques d'identification et de capture
des données - Spécifications pour essai des codes à barres de base (ISO/IEC
15421:2010)
Ta slovenski standard je istoveten z: EN ISO/IEC 15421:2024
ICS:
35.040.50 Tehnike za samodejno Automatic identification and
razpoznavanje in zajem data capture techniques
podatkov
SIST EN ISO/IEC 15421:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 15421:2024
---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 15421:2024
EN ISO/IEC 15421
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 35.040.50
English Version
Information technology - Automatic identification and data
capture techniques - Bar code master test specifications
(ISO/IEC 15421:2010)
Technologies de l'information - Techniques Informationstechnik - Verfahren der automatischen
automatiques d'identification et de capture des Identifikation und Datenerfassung -
données - Spécifications pour essai des codes à barres Testspezifikationen für Strichcode-Master (ISO/IEC
de base (ISO/IEC 15421:2010) 15421:2010)
This European Standard was approved by CEN on 16 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 15421:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 15421:2024
EN ISO/IEC 15421:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/IEC 15421:2024
EN ISO/IEC 15421:2024 (E)
European foreword
The text of ISO/IEC 15421:2010 has been prepared by Technical Committee ISO/IEC JTC 1 "Automatic
identification and data capture techniques” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO/IEC 15421:2024 by Technical Committee CEN/TC 225 “AIDC
technologies” the secretariat of which is held by TSE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
...
SLOVENSKI STANDARD
oSIST prEN ISO/IEC 15421:2024
01-februar-2024
Informacijska tehnologija - Tehnike za samodejno razpoznavanje in zajem
podatkov - Specifikacije za glavni preskus črtnih kod (ISO/IEC 15421:2010)
Information technology - Automatic identification and data capture techniques - Bar code
master test specifications (ISO/IEC 15421:2010)
Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung -
Testspezifikationen für Strichcode-Master (ISO/IEC 15421:2010)
Technologies de l'information - Techniques automatiques d'identification et de capture
des données - Spécifications pour essai de base des codes à barres (ISO/IEC
15421:2010)
Ta slovenski standard je istoveten z: prEN ISO/IEC 15421
ICS:
35.040.50 Tehnike za samodejno Automatic identification and
razpoznavanje in zajem data capture techniques
podatkov
oSIST prEN ISO/IEC 15421:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEC 15421:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEC 15421:2024
INTERNATIONAL ISO/IEC
STANDARD 15421
Second edition
2010-06-01
Information technology — Automatic
identification and data capture
techniques — Bar code master test
specifications
Technologies de l'information — Techniques automatiques
d'identification et de capture des données — Spécifications pour essai
de base des codes à barres
Reference number
ISO/IEC 15421:2010(E)
©
ISO/IEC 2010
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEC 15421:2024
ISO/IEC 15421:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2010 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEC 15421:2024
ISO/IEC 15421:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Symbols.2
5 Physical requirements .3
5.1 Material .3
5.2 Physical requirements controlled by the manufacturing process.3
5.3 Tolerances.3
5.4 Bar edge characteristics.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.