EN ISO/ASTM 52920:2023
(Main)Additive manufacturing - Qualification principles - Requirements for industrial additive manufacturing processes and production sites (ISO/ASTM 52920:2023)
Additive manufacturing - Qualification principles - Requirements for industrial additive manufacturing processes and production sites (ISO/ASTM 52920:2023)
The requirements in this document are for part manufacturers using additive manufacturing techniques and are independent of the used material and manufacturing method.
This document specifies criteria for AM relevant processes as well as quality-relevant characteristics and factors along the additive system operations and defines activities and sequences within an additive manufacturing production site.
This document is applicable to the additive manufacturing technologies defined in ISO/ASTM 52900 and defines quality assurance measures along the manufacturing process.
Environment, health and safety aspects are not covered comprehensively in this document. The corresponding content is addressed in the equipment manufacturer guidelines and ISO/ASTM 52931, ISO 27548, ISO/ASTM 52933 and ISO/ASTM 52938-1.
This document provides requirements that are additional to those provided by a quality management system (such as ISO 9001, ISO/TS 22163, ISO 19443, EN 9100, ISO 13485, IATF 16949). Additionally, this document can be used to establish quality management system relevant content that is specific to AM-technology.
Additive Fertigung - Grundsätze der Qualifizierung - Anforderungen an industrielle additive Fertigungsverfahren und Produktionsstätten (ISO/ASTM 52920:2023)
Die Anforderungen in diesem Dokument richten sich an Hersteller, die additive Fertigungstechniken anwenden, und sind von dem verwendeten Material und dem Fertigungsverfahren unabhängig.
Dieses Dokument legt Kriterien für AM-relevante Prozesse sowie qualitätsrelevante Merkmale und Faktoren entlang des additiven Systembetriebs fest und definiert Tätigkeiten und Abläufe innerhalb einer Produktionsstätte für additive Fertigung.
Dieses Dokument ist anwendbar auf die nach ISO/ASTM 52900 festgelegten additiven Fertigungstechnologien und definiert Qualitätssicherungsverfahren entlang des Fertigungsprozesses.
Umwelt , Gesundheits- und Sicherheitsaspekte werden in diesem Dokument nicht umfassend behandelt. Die entsprechenden Inhalte werden in den Leitlinien der Ausrüstungshersteller und in ISO/ASTM 52931, ISO 27548 , ISO/ASTM 52933 und ISO/ASTM 52938 1 adressiert.
Dieses Dokument enthält zusätzliche Anforderungen zu den durch ein Qualitätsmanagementsystem (wie etwa ISO 9001, ISO/TS 22163, ISO 19443, EN 9100, ISO 13485, IATF 16949) vorgesehenen Anforderungen. Zusätzlich kann dieses Dokument genutzt werden, um für das Qualitätsmanagementsystem relevante Inhalte festzulegen, die spezifisch für die AM-Technologie sind.
Fabrication additive - Principes de qualification - Exigences pour les procédés et les sites industriels de production en fabrication additive (ISO/ASTM 52920:2023)
Les exigences du présent document s'adressent aux fabricants de pièces utilisant des techniques de fabrication additive et sont indépendantes du matériau utilisé et de la méthode de fabrication.
Le présent document spécifie les critères des procédés de FA pertinents ainsi que les caractéristiques et les facteurs relatifs à la qualité tout au long des opérations du système additif, et définit les activités et les séquences au sein d'un site de production de fabrication additive.
Le présent document est applicable aux technologies de fabrication additive définies dans l'ISO/ASTM 52900 et définit les mesures d'assurance qualité tout au long du procédé de fabrication.
Les aspects liés à l'environnement, à la santé et à la sécurité ne sont pas couverts de manière exhaustive par le présent document. Les contenus correspondants sont traités dans les lignes directrices du fabricant de l'équipement et dans l'ISO/ASTM 52931, l'ISO 27548, l'ISO/ASTM 52933 et l'ISO/ASTM 52938‑1.
Le présent document fournit des exigences supplémentaires à celles fournies par un système de management de la qualité (tel que l'ISO 9001, l'ISO/TS 22163, l'ISO 19443, l'EN 9100, l'ISO 13485, l'IATF 16949). En outre, le présent document peut être utilisé pour établir du contenu pertinent, spécifique de la technologie de fabrication additive, pour le système de management de la qualité.
Aditivna proizvodnja - Kvalifikacija - Zahteve za industrijske postopke in mesta za aditivno proizvodnjo (ISO/ASTM 52920:2023)
Ta dokument določa zahteve za proizvodne centre, v katerih se uporabljajo metode aditivne proizvodnje (v nadaljevanju: centri za aditivno proizvodnjo), ki niso odvisne od uporabljenega materiala in proizvodne metode.
Ta dokument določa kriterije za postopke aditivne proizvodnje ter lastnosti in dejavnike, ki so pomembni za kakovost, v procesni verigi ter opredeljuje aktivnosti in zaporedja v centru za aditivno proizvodnjo.
Ta dokument se uporablja za tehnologije aditivne proizvodnje, opredeljene skladno s standardom DIN EN
ISO/ASTM 52900, in temelji na pristopu, ki je usmerjen v proizvodni postopek.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/ASTM 52920:2023
01-september-2023
Aditivna proizvodnja - Kvalifikacija - Zahteve za industrijske postopke in mesta za
aditivno proizvodnjo (ISO/ASTM 52920:2023)
Additive manufacturing - Qualification principles - Requirements for industrial additive
manufacturing processes and production sites (ISO/ASTM 52920:2023)
Additive Fertigung - Grundsätze der Qualifizierung - Anforderungen an industrielle
additive Fertigungsverfahren und Produktionsstätten (ISO/ASTM 52920:2023)
Fabrication additive - Principes de qualification - Exigences pour les procédés et les sites
industriels de production en fabrication additive (ISO/ASTM 52920:2023)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52920:2023
ICS:
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO/ASTM 52920:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/ASTM 52920:2023
---------------------- Page: 2 ----------------------
SIST EN ISO/ASTM 52920:2023
EN ISO/ASTM 52920
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 25.030
English Version
Additive manufacturing - Qualification principles -
Requirements for industrial additive manufacturing
processes and production sites (ISO/ASTM 52920:2023)
Fabrication additive - Principes de qualification - Additive Fertigung - Grundsätze der Qualifizierung -
Exigences pour les procédés et les sites industriels de Anforderungen an industrielle additive
production en fabrication additive (ISO/ASTM Fertigungsverfahren und Produktionsstätten
52920:2023) (ISO/ASTM 52920:2023)
This European Standard was approved by CEN on 1 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52920:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/ASTM 52920:2023
EN ISO/ASTM 52920:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/ASTM 52920:2023
EN ISO/ASTM 52920:2023 (E)
European foreword
This document (EN ISO/ASTM 52920:2023) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switze
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.