EN 287-1:2004

Qualification test of welders - Fusion welding - Part 1: Steels

This European Standard defines the qualification test of welders for the fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner/examining body.
When qualifying welders, the emphasis is placed on the welders ability to manually manipulate the electrode/ welding torch/ welding blowpipe and thereby producing a weld of acceptable quality.
The welding processes referred to in this European Standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes (see EN 1418).

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle

Diese Europäische Norm definiert die Schweißerprüfung für das Schmelzschweißen von Stählen.
Sie stellt eine Reihe technischer Regeln für systematische Prüfungen von Schweißern auf und ermöglicht so, dass solche Qualifizierungen unabhängig von der Art des Erzeugnisses, des Ortes und des Prüfers/der Prüfstelle einheitlich akzeptiert werden.
Wenn Schweißer qualifiziert werden, liegt der Schwerpunkt auf der Fähigkeit des Schweißers, den Elektroden-halter/die Schweißpistole/den Schweißbrenner so zu handhaben, dass damit eine Schweißung von zulässiger Qualität erzeugt wird.
Die Schweißprozesse nach dieser Norm schließen nur solche Schweißprozesse ein, die als Handschweißen oder teilmechanisches Schweißen bezeichnet werden. Sie schließen nicht die vollmechanischen und automatischen Schweißprozesse ein (siehe EN 1418).

Epreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers

La présente Norme européenne définit l'épreuve de qualification des soudeurs pour le soudage par fusion des aciers.
Elle fournit un ensemble de règles techniques pour l'épreuve de qualification systématique des soudeurs, et permet à de telles qualifications d'être acceptées uniformément, indépendamment du type de produit, du lieu et de l'examinateur ou de l'organisme d'examen.
Lors de la qualification des soudeurs, l'accent est porté sur l'aptitude du soudeur à guider manuellement l'électrode, la torche ou le chalumeau de soudage pour produire une soudure de qualité acceptable.
Les procédés de soudage concernés par la présente Norme européenne sont les procédés de soudage par fusion désignés en tant que, manuels ou semi-automatiques. Elle ne traite pas des procédés de soudage totalement mécanisés et automatisés (voir l'EN 1418).

Preskušanje varilcev - Talilno varjenje - 1. del: Jekla

General Information

• Status: Withdrawn
• Publication Date: 02-Mar-2004
• Withdrawal Date: 12-Jul-2011
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jul-2011
• Completion Date: 13-Jul-2011
• Directive: 2009/105/EC - DIRECTIVE 2009/105/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 September 2009 relating to simple pressure vessels
• Directive: 2009/105//EC - DIRECTIVE 2009/105/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 September 2009 relating to simple pressure vessels
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Mandate: M/BC/CEN/86/6 - Standardization request to CEN concerning simple unfired pressure vessels
• Ref Project: SIST EN 287-1:2004 - Qualification test of welders - Fusion welding - Part 1: Steels

Relations

• Replaces: EN 287-1:1992 - Approval testing of welders - Fusion welding - Part 1: Steels
• Effective Date: 22-Dec-2008
• Replaces: EN 287-1:1992/A1:1997 - Approval testing of welders - Fusion welding - Part 1: Steels
• Effective Date: 22-Dec-2008
• Replaced By: EN 287-1:2011 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 16-Jul-2011
• Amended By: EN 287-1:2004/A2:2006 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 08-Jun-2022
• Corrected By: EN 287-1:2004/AC:2004 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 08-Jun-2022
• Revised: prEN ISO 9606-1 - Qualification test of welders - Fusion welding - Part 1: Steels (ISO/DIS 9606-1:2008)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Qualification test of welders - Fusion welding - Part 1: SteelsPreskušanje varilcev - Talilno varjenje - 1. del: JeklaEpreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : AciersPrüfung von Schweißern - Schmelzschweißen - Teil 1: StähleTa slovenski standard je istoveten z:EN 287-1:2004SIST EN 287-1:2004en25.160.10Varilni postopki in varjenjeWelding processesICS:SLOVENSKI
STANDARDSIST EN 287-1:200401-junij-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 287-1March 2004ICS 25.160.10Supersedes EN 287-1:1992English versionQualification test of welders - Fusion welding - Part 1: SteelsEpreuve de qualification des soudeurs - Soudage parfusion - Partie 1 : AciersPrüfung von Schweißern - Schmelzschweißen - Teil 1:StahlThis European Standard was approved by CEN on 2 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 287-1:2004: E



EN 287-1:2004 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Symbols and abbreviated terms.64.1General.64.2Reference numbers of welding processes.64.3Abbreviations.75Essential variables and range of qualification.85.1General.85.2Welding processes.85.3Product type.95.4Type of weld.95.5Material groups.105.6Welding consumables.105.7Dimensions.111.8Welding positions.
...