Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA

Gives a glossary of semiconductor sockets for BGA, LGA, FBGA and FLGA. Intends to establish definitions and unification of terminology relating to tests and burn-in sockets for BGA, LGA, FBGA and FLGA

Mechanische Normung von Halbleiterbauelementen - Teil 6-16: Glossar für Fassungen für die Prüfung und Voralterung von BGA, LGA, FBGA und FLGA

Normalisation mécanique des dispositifs à semi-conducteurs - Partie 6-16: Glossaire des supports de test et de déverminage pour les BGA, LGA, FBGA et FLGA

La CEI 60191-6-16:2007 fournit un glossaire relatif aux supports pour boîtiers à semiconducteurs de type BGA, LGA, FBGA et FLGA. Cette norme est destinée à établir des définitions et une unification de la terminologie relatives aux supports de test et de déverminage pour les BGA, LGA, FBGA et FLGA.

Mehanska standardizacija polprevodniških elementov - 6-16. del: Pojmovnik polprevodniških preskušanj in podstavkov za utekanje za BGA, LGA, FBGA in FLGA (IEC 60191-6-16:2007)

General Information

Status
Published
Publication Date
19-Jun-2007
Withdrawal Date
30-Apr-2010
Current Stage
6060 - Document made available - Publishing
Start Date
20-Jun-2007
Completion Date
20-Jun-2007

Buy Standard

Standard
EN 60191-6-16:2008
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60191-6-16:2008
01-januar-2008
Mehanska standardizacija polprevodniških elementov - 6-16. del: Pojmovnik
polprevodniških preskušanj in podstavkov za utekanje za BGA, LGA, FBGA in
FLGA (IEC 60191-6-16:2007)
Mechanical standardization of semiconductor devices -- Part 6-16: Glossary of
semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
Mechanische Normung von Halbleiterbauelementen -- Teil 6-16: Glossar für Fassungen
für die Prüfung und Voralterung von BGA, LGA, FBGA und FLGA
Normalisation mécanique des dispositifs à semi-conducteurs - Partie 6-16 : Glossaire
des supports de test et de déverminage pour les BGA, LGA, FBGA et FLGA
Ta slovenski standard je istoveten z: EN 60191-6-16:2007
ICS:
01.100.25 5LVEHVSRGURþMD Electrical and electronics
HOHNWURWHKQLNHLQHOHNWURQLNH engineering drawings
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 60191-6-16:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60191-6-16:2008

---------------------- Page: 2 ----------------------

SIST EN 60191-6-16:2008


EUROPEAN STANDARD
EN 60191-6-16

NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM

ICS 31.080.01


English version


Mechanical standardization of semiconductor devices -
Part 6-16: Glossary of semiconductor tests
and burn-in sockets for BGA, LGA, FBGA and FLGA
(IEC 60191-6-16:2007)


Normalisation mécanique  Mechanische Normung
des dispositifs à semi-conducteurs - von Halbleiterbauelementen -
Partie 6-16: Glossaire des supports Teil 6-16: Glossar für Fassungen
de test et de déverminage für die Prüfung und Voralterung
pour les BGA, LGA, FBGA et FLGA von BGA, LGA, FBGA und FLGA
(CEI 60191-6-16:2007) (IEC 60191-6-16:2007)




This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60191-6-16:2007 E

---------------------- Page: 3 ----------------------

SIST EN 60191-6-16:2008
EN 60191-6-16:2007 - 2 -
Foreword
The text of document 47D/679/FDIS, future edition 1 of IEC 60191-6-16, prepared by SC 47D,
Mechanical standardization for semiconductor devices, of IEC TC 47, Semiconductor devices, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60191-6-16 on
2007-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60191-6-16:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60191-6-16:2008
- 3 - EN 60191-6-16:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.