iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62282-6-106:2024

(Main)

Fuel cell technologies - Part 6-106: Micro fuel cell power systems - Safety - Indirect Class 8 (corrosive) compounds

Fuel cell technologies - Part 6-106: Micro fuel cell power systems - Safety - Indirect Class 8 (corrosive) compounds

IEC 62282-6-106:2024 covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges using hydrogen produced from UN Class 8 (corrosive) borohydride formulations as fuel. These systems and units use proton exchange membrane (PEM) fuel cell technologies. The designs include fuel processing subsystems to derive hydrogen gas from the corrosive fuel formulation. This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012.This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012: a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282-6-1XX series cover particular requirements for individual fuel types.

Brennstoffzellentechnologien - Teil 6-106: Mikrobrennstoffzellen-Energiesysteme - Sicherheit - Indirekte Verbindungen der Gefahrgutklasse 8 (ätzend)

Technologies des piles à combustible - Partie 6-106: Systèmes à micropiles à combustible - Sécurité - Composés (corrosifs) indirects de classe 8

IEC 62282-6-106:2024 raite des systèmes à micropiles à combustible, des blocs d’alimentation électrique des micropiles à combustible et des cartouches de combustible qui utilisent comme combustible l’hydrogène produit à partir de formulations de borohydrure de classe 8 des Nations Unies (corrosifs). Ces systèmes et blocs d’alimentation utilisent des technologies de piles à combustible à membrane à échange de protons (PEM, Proton Exchange Membrane). Les conceptions incluent des sous-systèmes de traitement de combustibles pour obtenir un gaz hydrogène à partir de la formulation corrosive d’un combustible. Cette première édition, ainsi que les autres parties de la série IEC 62282-6-1XX, annulent et remplacent l'IEC 62282-6-100:2010 et l'IEC 62282-6-100:2010/AMD1:2012. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 62282‑6‑100:2010 et l’IEC 62282-6-100:2010/AMD1:2012: a) une nouvelle structure a été établie: l’IEC 62282-6-101 couvre les exigences générales de sécurité communes à tous les types de combustibles, tandis que l’IEC 62282-6-102 et les parties suivantes de la série IEC 62282-6-1XX couvrent les exigences particulières pour les différents types de combustibles.

Tehnologije gorivnih celic - 6-106. del: Elektroenergetski sistemi z mikro gorivnimi celicami - Varnost - Spojine razreda 8 (korozivne) (IEC 62282-6-106:2024)

General Information

Status
Published
Publication Date
28-Mar-2024
ICS
27.070 - Fuel cells
Technical Committee
CLC/SR 105 - Fuel cell technologies
Drafting Committee
IEC/TC 105 - IEC_TC_105
Current Stage
6060 - Document made available - Publishing
Start Date
29-Mar-2024
Completion Date
29-Mar-2024
Ref Project
SIST EN IEC 62282-6-106:2024 - Fuel cell technologies - Part 6-106: Micro fuel cell power systems - Safety - Indirect Class 8 (corrosive) compounds (IEC 62282-6-106:2024)

Relations

Splited From
EN 62282-6-100:2010/A1:2012 - Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
Effective Date
12-Mar-2024
Splited From
EN 62282-6-100:2010 - Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
Effective Date
12-Mar-2024

Buy Standard

prEN IEC 62282-6-106:2023prEN IEC 62282-6-106:2023
PreviousNext
Draft
prEN IEC 62282-6-106:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62282-6-106:2023
01-marec-2023
Tehnologije gorivnih celic - 6-106. del: Elektroenergetski sistemi z mikro gorivnimi
celicami - Varnost - Spojine razreda 8 (korozivne)
Fuel cell technologies - Part 6-106: Micro fuel cell power systems - Safety - Indirect
Class 8 (corrosive) compounds
Ta slovenski standard je istoveten z: prEN IEC 62282-6-106:2022
ICS:
27.070 Gorilne celice Fuel cells
oSIST prEN IEC 62282-6-106:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62282-6-106:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62282-6-106:2023
105/950/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62282-6-106 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-23 2023-03-17
SUPERSEDES DOCUMENTS:
105/808/CD, 105/822/CC

IEC TC 105 : FUEL CELL TECHNOLOGIES
SECRETARIAT: SECRETARY:
Germany Mr David Urmann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

TITLE:
Fuel cell technologies – Part 6-106: Micro fuel cell power systems – Safety - Indirect Class 8 (corrosive)
compounds

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62282-6-106:2023
– 2 – IEC CDV 62282-6-106  IEC 2022
CONTENTS

FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
1.1 Fuels and technologies covered by this part . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Safety Principles. 7
5 General safety requirements . 7
5.1 General . 7
5.2 Chemical Safety Requirements . 7
5.3 Material requirements . 8
5.4 Mechanical design requirements . 8
5.4.1 General . 8
5.4.2 Micro fuel cell power system . 9
5.4.3 Fuel cartridge . 9
5.4.4 Fuel valves and connections . 9
5.5 Electrical requirements . 9
5.6 FMEA . 9
5.7 Functional safety requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62282-6-101:2024(Main)
Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirements
SIST EN IEC 62282-6-101:2024

IEC 62282-6-101:2024 covers micro fuel cell power systems and fuel cartridges that are wearable or easily carried by hand, providing direct current outputs that do not exceed 60 V DC and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-100. This document covers micro fuel cell power systems and fuel cartridges. This document establishes the requirements for micro fuel cell power systems and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and cargo and consumer transportation and storage of such items. . Fuel cartridges refilled by the manufacturer or by trained technicians are covered by this document. The fuel cartridges covered by this document are not intended to be refilled by the consumer. This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012. This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012: a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282‑6-1XX series cover particular requirements for specific fuel types based on the requirements given in IEC 62282-6-101.

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-202:2023(Main)
Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
SIST EN IEC 62282-4-202:2024

IEC 62282-4-202:2023 covers performance test methods of fuel cell power systems intended to be used to power unmanned aircrafts, including general requirements, start-up, shutdown, power output, continuous running time, electric efficiency, data transmission, warning and monitoring, environmental compatibility, etc. The scope of this document is limited to electrically powered unmanned aircrafts with a maximum take-off mass not exceeding 150 kg (i.e. level 5 or lower unmanned aircrafts (UAs)). This document applies to fuel cell power systems with a rated output voltage not exceeding 220 V DC for outdoor use. This document applies only to compressed gaseous hydrogen-fuelled fuel cell power systems.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-2-100:2020/AC:2023-11(Corrigendum)
Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
SIST EN IEC 62282-2-100:2020/AC:2024
  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-8-301:2023(Main)
Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
SIST EN IEC 62282-8-301:2023

IEC 62282-8-301:2023 specifies performance test methods of power-to-methane systems based on solid oxide cells (SOCs). Water, CO2, and electricity are supplied to the system to produce methane and oxygen. This document is not intended to be applied to solid oxide fuel cell (SOFC) cell/stack assembly units for power generation purposes only, since these are covered in IEC 62282-7-2. In addition, the test methods for SOC cell/stack assembly units including reversible operation (without any methanation reactor) are already described in IEC 62282-8-101. This document is intended to be used for data exchanges in commercial transactions between the system manufacturers and customers. Users of this document can selectively execute test items suitable for their purposes from those described in this document.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-102:2023(Main)
Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
SIST EN IEC 62282-4-102:2023

IEC 62282-4-102:2022 is available as IEC 62282-4-102:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-4-102:2022 specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). This document covers fuel cell power systems for propulsion other than those for road vehicles. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen, and - methanol. This document covers the fuel cell power system as defined in 3.7 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding DC 150 V for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. This second edition cancels and replaces the first edition published in 2017. This edition includes the following significant technical changes with respect to the previous edition: a. alignment of the Scope with the second edition of IEC 62282-4-101:2022; b. deletion of terms and definitions (previous entries 3.5, 3.10, and 3.15); c. addition of new terms in Clause 3: "delivered power" (3.13) and "regenerated power" (3.14); d. revision of symbols and their meanings in alignment with those of IEC 62282-3-201; e. replacement of "reference conditions" with "standard conditions" as seen in Clause 5; f. revision of the test method for the accessory load voltage spike test (13.3.2); g. addition of clarifications in Clause 14 (Power stability under operation); h. addition of a checklist for performance criteria dealt with in this document (Annex C).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-600:2022(Main)
Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
SIST EN IEC 62282-4-600:2022

IEC 62282-4-600:2022 covers the requirements for the performance test methods of fuel cell/battery hybrid systems intended to be used for electrically powered applications for excavators. For this purpose, this document covers electrical performance and vibration tests for the fuel cell/battery hybrid system. This document also covers performance test methods which focus on vibration and other characteristics for balance of plant (BOP) installed in heavy-duty applications with fuel cell/battery hybrid system. This document applies to both gaseous hydrogen-fuelled fuel cell power, liquid hydrogen-fuelled fuel cell power, direct methanol fuel cell power and battery hybrid power pack systems.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-101:2022(Main)
Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety
SIST EN IEC 62282-4-101:2022

This document deals with safety of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). This part of IEC 62282 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks as defined in ISO 5053-1, except for: - rough-terrain trucks; - non-stacking low-lift straddle carriers; - stacking high-lift straddle carriers; - rough-terrain variable-reach trucks; - slewing rough-terrain variable-reach trucks; - variable-reach container handlers; - pedestrian propelled trucks. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen; - methanol. This document covers the fuel cell power system as defined in 3.8 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding 150 V DC for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. In accordance with IEC Guide 116, significant hazards, hazardous situations and events dealt with in this document are shown in Annex B. The following are not included in the scope of this document: - detachable type fuel source containers; - hybrid trucks that include an internal combustion engine; - reformer-equipped fuel cell power systems; - fuel cell power systems intended for operation in potentially explosive atmospheres; - fuel storage systems using liquid hydrogen. [Figure 1]

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62282-3-201:2017/A1:2022(Amendment)
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
SIST EN 62282-3-201:2018/A1:2022

No scope available

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-7-2:2021(Main)
Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
SIST EN IEC 62282-7-2:2021

This part of IEC 62282 applies to SOFC cell/stack assembly units, testing systems, instruments and measuring methods, and specifies test methods to test the performance of SOFC cells and stacks. This document is not applicable to small button cells that are designed for SOFC material testing and provide no practical means of fuel utilization measurement. This document is used based on the recommendation of the entity that provides the cell performance specification or for acquiring data on a cell or stack in order to estimate the performance of a system based on it. Users of this document can selectively execute test items suitable for their purposes from those described in this document Users can substitute selected test methods of this document with equivalent test methods of IEC 62282-8-101 for solid oxide cell (SOC) operation for energy storage purposes, operated in reverse or reversible mode.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-2-100:2020(Main)
Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
SIST EN IEC 62282-2-100:2020

IEC 62282-2-100:2020 provides safety related requirements for construction, operation under normal and abnormal conditions and the testing of fuel cell modules. This document deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. Protection against damage inside the fuel cell modules is not addressed in this document, provided it does not lead to hazards outside the module. These requirements can be superseded by other standards for equipment containing fuel cell modules as required for particular applications. This first edition cancels and replaces IEC 62282-2, published in 2012. This edition includes the following significant technical changes with respect to IEC 62282­2:2012: • update of definitions, in particular fuel cell module for normal operation; • leakage values under normal and abnormal operation have been addressed; • a delayed ignition test has been included; • protective measures to limit gas leakage have been included; • the requirements for insulation between live parts and SELV have been updated; • the general safety strategy has been modified to reflect the needs for different application standards; the modifications are in line with similar modifications made to IEC 62282­-3-­100; • the electrical components clause has been modified to reflect the needs for different application standards; the modifications are in line with similar modifications made to IEC 62282-3-100; • protective earthing as part of the module or bonding as a measure within the installation has been introduced; • a dielectric strength test has been completely updated by referring to IEC 62744-1 for voltages up to 1 000 V AC/1 500 V DC; • a new “pressure drop method” leakage test method has been included; • a new Annex addressing significant hazards, hazardous situations and events dealt with in this document, and linked to 4.1 (General safety strategy) has been added.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day