iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62226-3-1:2007/A1:2017

(Amendment)

Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models

Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models

Sicherheit in elektrischen oder magnetischen Feldern im niedrigen und mittleren Frequenzbereich - Verfahren zur Berechnung der induzierten Körperstromdichte und des im menschlichen Körper induzierten elektrischen Feldes - Teil 3-1: Exposition gegenüber elektrischen Feldern - Analytische Modelle und numerische 2D-Modelle

Exposition aux champs électriques ou magnétiques à basse et moyenne fréquence - Méthodes de calcul des densités de courant induit et des champs électriques induits dans le corps humain - Partie 3-1: Exposition à des champs électriques - Modèles analytiques et numériques 2D

Izpostavljenost električnim in magnetnim poljem v nizkem in srednjem frekvenčnem obsegu - Metode za izračunavanje trenutne gostote in notranjega induciranega električnega polja v človeškem telesu - 3-1. del: Izpostavljenost električnim poljem - Analitični in numerični 2D modeli

General Information

Status
Published
Publication Date
19-Jan-2017
Withdrawal Date
10-Nov-2019
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
CLC/TC 106X - Electromagnetic fields in the human environment
Drafting Committee
IEC/TC 106 - IEC_TC_106
Current Stage
6060 - Document made available - Publishing
Start Date
20-Jan-2017
Completion Date
20-Jan-2017
Ref Project
SIST EN 62226-3-1:2008/A1:2017 - Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models

Relations

Amends
EN 62226-3-1:2007 - Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models
Effective Date
26-Jan-2023

Buy Standard

EN 62226-3-1:2008/A1:2017EN 62226-3-1:2008/A1:2017
PreviousNext
Amendment
EN 62226-3-1:2008/A1:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62226-3-1:2008/A1:2017
01-april-2017
,]SRVWDYOMHQRVWHOHNWULþQLPLQPDJQHWQLPSROMHPYQL]NHPLQVUHGQMHP
IUHNYHQþQHPREVHJX0HWRGH]DL]UDþXQDYDQMHWUHQXWQHJRVWRWHLQQRWUDQMHJD
LQGXFLUDQHJDHOHNWULþQHJDSROMDYþORYHãNHPWHOHVXGHO,]SRVWDYOMHQRVW
HOHNWULþQLPSROMHP$QDOLWLþQLLQQXPHULþQL'PRGHOL
Exposure to electric or magnetic fields in the low and intermediate frequency range -
Methods for calculating the current density and internal electric field induced in the
human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models
Sicherheit in elektrischen oder magnetischen Feldern im niedrigen und mittleren
Frequenzbereich - Verfahren zur Berechnung der induzierten Körperstromdichte und des
im menschlichen Körpers induzierten elektrischen Feldes - Teil 3-1: Exposition
gegenüber elektrischen Feldern - Analytische Modelle und numerische 2D-Modelle
Exposition aux champs électriques ou magnétiques à basse et moyenne fréquence -
Méthodes de calcul des densités de courant induit et des champs électriques induits
dans le corps humain - Partie 3-1: Exposition à des champs électriques - Modèles
analytique
Ta slovenski standard je istoveten z: EN 62226-3-1:2007/A1:2017
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 62226-3-1:2008/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62226-3-1:2008/A1:2017

---------------------- Page: 2 ----------------------

SIST EN 62226-3-1:2008/A1:2017


EUROPEAN STANDARD EN 62226-3-1:2007/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2017
ICS 17.220.20

English Version
Exposure to electric or magnetic fields in the low and
intermediate frequency range - Methods for calculating the
current density and internal electric field induced in the human
body - Part 3-1: Exposure to electric fields - Analytical and 2D
numerical models
(IEC 62226-3-1:2007/A1:2016)
Exposition aux champs électriques ou magnétiques à basse
Sicherheit in elektrischen oder magnetischen Feldern im
et moyenne fréquence - Méthodes de calcul des densités niedrigen und mittleren Frequenzbereich - Verfahren zur
de courant induit et des champs électriques induits dans le Berechnung der induzierten Körperstromdichte und des im
corps humain - Partie 3-1: Exposition à des champs menschlichen Körpers induzierten elektrischen Feldes -
électriques - Modèles analytiques et numériques 2D Teil 3-1: Exposition gegenüber elektrischen Feldern -
(IEC 62226-3-1:2007/A1:2016) Analytische Modelle und numerische 2D-Modelle
(IEC 62226-3-1:2007/A1:2016)
This amendment A1 modifies the European Standard EN 62226-3-1:2007; it was approved by CENELEC on 2016-11-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62226-3-1:2007/A1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62226-3-1:2008/A1:2017
EN 62226-3-1:2007/A1:2017
European foreword
The text of document 106/376/FDIS, future IEC 62226-3-1:2007/A1, prepared by IEC/TC 106
"Methods for the assessment of electric, magnetic and electromagnetic fields associated with human
exposure" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62226-3-1:2007/A1:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-08-11
implemented at national level by
publication of an identical national
st
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC/IEEE 63195-1:2023(Main)
Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) - Part 1: Measurement procedure
kSIST FprEN IEC/IEEE 63195-1:2022

Identical adoption of future IEC/IEEE 63195-1 into EN IEC/IEEE 63195-1.

  • Draft
    146 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC/IEEE 63195-2:2023(Main)
Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) - Part 2: Computational procedure
kSIST FprEN IEC/IEEE 63195-2:2022

Identical adoption of future IEC/IEEE 63195-2 into EN IEC/IEEE 63195-2

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62764-1:2022(Main)
Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure - Part 1: Low-frequency magnetic fields
SIST EN IEC 62764-1:2022

IEC 62764-1:2022 specifies a methodology for determining the exposure to multiple magnetic field sources for passenger cars and light commercial vehicles including standardized operating conditions and measurement volumes and/or surfaces. This part of IEC 62764 applies to the assessment of human exposure to low-frequency magnetic fields generated by automotive vehicles. For plug-in vehicles, this includes the electric vehicle supply equipment (EVSE) and associated cables provided by the car manufacturer. This excludes the charging station. This document specifies the measurement procedure for the evaluation of magnetic field exposures generated by electronic and electrical equipment (excluding intentionally transmitting radio frequency antennas) in selected automotive environments, for passenger cars and commercial vehicles of categories M1 and N1 as defined in ECE/TRANS/WP.29/78/Rev.3 [1], with respect to human exposure. It provides standardized operating conditions and defines recommended measurements to assess compliance with the applicable exposure requirements. This document covers the frequency range 1 Hz to 100 kHz and is applicable to any type of engine and/or internal energy source.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC/IEEE 62209-1528:2021(Main)
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz)
SIST EN IEC/IEEE 62209-1528:2022

Identical adoption of future IEC/IEEE 62209-1528 into EN IEC/IEEE 62209-1528.

  • Standard
    283 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50401:2017(Main)
Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service
SIST EN 50401:2018

This product standard is related to human exposure to radiofrequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz. The object is to assess the compliance of such equipment with the general public basic restrictions (directly or indirectly via compliance with reference levels) and the workers’ exposure limits values (directly or indirectly via compliance with action levels), when it is put into service in its operational environment.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50647:2017(Main)
Basic standard for the evaluation of workers' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity
SIST EN 50647:2017

This European Standard provides a general procedure to assess workers’ exposure to electric and magnetic fields (EMF) in work places associated with the production, transmission and distribution of electric energy, and to demonstrate compliance with exposure limit values and action levels as stated in the Council and European Parliament "EMF" Directive 2013/35/EU [12]. NOTE 1 The Council and European Parliament Directive 2013/35/EU will be transposed into national legislation in all the EU member countries. It is important that users of this standard consult the national legislation related to this transposition in order to identify the national regulations and requirements. These national regulations and requirements may have additional requirements that are not covered by this standard It has the role of a specific workplace standard. It takes into account the non-binding application guide for implementing the EMF Directive [11] and it defines the assessment procedures and compliance criteria applicable to the electric industry. The frequency range of this standard covers from DC to 20 kHz, which is sufficient to include the power frequency used for electric power supply systems throughout Europe (50 Hz) and the various harmonics and inter-harmonics occurring in the supply system. In this extremely low frequency range, electric and magnetic fields are independent and, therefore, they both have to be addressed in the exposure assessment. NOTE 2 Electrical companies also use radio frequency transmissions to operate and maintain their networks and power plants. Similarly, other exposures to EMF may occur during maintenance operations, for instance, due to the use of hand-held electrical tools. All these EMF sources are outside the scope of this standard. NOTE 3 Regarding EMF in the low frequency range, the scientific basis of the EMF directive is the ICNIRP health guidelines published in 2010 [14]. Reference is made to this scientific basis when necessary for justifying or clarifying some of the technical statements of the present document.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62110:2009/AC:2015(Corrigendum)
Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
SIST EN 62110:2010/AC:2015
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61786-1:2014(Main)
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
SIST EN 61786-1:2014

IEC 61786-1:2013 provides guidance for measuring instruments used to measure the field strength of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz and with DC magnetic fields to evaluate the exposure levels of the human body to these fields. Sources of fields include devices that operate at power frequencies and produce power frequency and power frequency harmonic fields, as well as devices that produce fields within the frequency range of this document, including devices that produce static fields, and the earth's static magnetic field. The magnitude ranges covered by this standard are 0,1 μT to 200 mT in AC (1 μT to 10 T in DC) and 1 V/m to 50 kV/m for magnetic fields and electric fields, respectively. When measurements outside this range are performed, most of the provisions of this standard will still apply, but special attention should be paid to specified uncertainty and calibration procedures. The first editions of IEC 61786-1 and IEC 61786-2 replace IEC 61786:1998. Part 1 deals with measuring instruments, and Part 2 deals with measurement procedures. The content of the standard was revised in order to give up-to-date and practical information to the user.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62479:2010(Main)
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
SIST EN 62479:2010

IEC 62479:2010 provides simple conformity assessment methods for low-power electronic and electrical equipment to an exposure limit relevant to electromagnetic fields (EMF). If such equipment cannot be shown to comply with the applicable EMF exposure requirements using the methods included in this standard for EMF assessment, then other standards, including IEC 62311 or other (EMF) product standards, may be used for conformity assessment.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62110:2009(Main)
Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
SIST EN 62110:2010

IEC 62110:2009 establishes measurement procedures for electric and magnetic field levels generated by AC power systems to evaluate the exposure levels of the human body to these fields. This standard is not applicable to DC power transmission systems. IEC 62110:2009 is applicable to public exposure in the domestic environment and in areas accessible to the public. It specifies fundamental procedures for the measurement of fields, and, with regard to human exposure, for obtaining a field value that corresponds to a spatial average over the entire human body. IEC 62110:2009 is not applicable to occupational exposure associated with, for example, the operation and/or maintenance of the power systems. Such exposure may occur when working inside a distribution or transmission substation, a power plant, in a manhole or a tunnel for underground cables, or on an overhead line tower or pole.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day