EN 50180:2010
(Main)Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers – Part 1: General requirements for bushings
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers – Part 1: General requirements for bushings
This European Standard is applicable to ceramic and resin insulated bushings having highest voltages above 1 kV up to 52 kV, rated currents from 250 A up to 3 150 A and frequencies from 15 Hz up to 60 Hz for insulating liquid filled transformers. This standard establishes essential dimensions, to ensure interchangeability of bushings and to ensure adequate mounting and interchangeability of mating plug-in separable connectors of equivalent ratings.
Durchführungen über 1 kV bis 52 kV und von 250 A bis 3,15 kA für flüssigkeitsgefüllte Transformatoren
Traversées de tensions supérieures à 1 kV jusqu'à 52 kV et de 250 A à 3,15 kA pour transformateurs à remplissage de liquide
Skoznjiki za napetosti nad 1 kV do 52 kV in tokove od 250 A do 3,15 kA za transformatorje, polnjene s tekočinami
Ta evropski standard velja za s keramiko in smolo izolirane skoznjike, ki imajo maksimalno napetost nad 1 kV do 52 kV, ocenjene tokove od 250 A do 3150 A in pri frekvencah od 15 Hz do 60 Hz za transformatorje, polnjene z izolacijskimi tekočinami. Ta standard vzpostavlja potrebni obseg za zagotavljanje medsebojne zamenljivosti skoznjikov in za zagotavljanje primernega nameščanja in medsebojne zamenljivosti za paritev priključnih konektorjev enakovrednih ocen.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50180:2010
01-november-2010
1DGRPHãþD
SIST EN 50180:1997
6NR]QMLNL]DQDSHWRVWLQDGN9GRN9LQWRNRYHRG$GRN$]D
WUDQVIRUPDWRUMHSROQMHQHVWHNRþLQDPL
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers
Durchführungen über 1 kV bis 52 kV und von 250 A bis 3,15 kA für flüssigkeitsgefüllte
Transformatoren
Traversées de tensions supérieures à 1 kV jusqu'à 52 kV et de 250 A à 3,15 kA pour
transformateurs à remplissage de liquide
Ta slovenski standard je istoveten z: EN 50180:2010
ICS:
29.080.20 Skoznjiki Bushings
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 50180:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50180:2010
---------------------- Page: 2 ----------------------
SIST EN 50180:2010
EUROPEAN STANDARD
EN 50180
NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM
ICS 29.080.20 Supersedes EN 50180:1997
English version
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA
for liquid filled transformers
Traversées de tensions supérieures à Durchführungen über 1 kV bis 52 kV
1 kV jusqu'à 52 kV et de 250 A à 3,15 kA und von 250 A bis 3,15 kA
pour transformateurs immergés dans für flüssigkeitsgefüllte Transformatoren
un liquide
This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50180:2010 E
---------------------- Page: 3 ----------------------
SIST EN 50180:2010
EN 50180:2010 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 36A, Insulated bushings. It
was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50180 on
2010-09-01.
This document supersedes EN 50180:1997.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates are proposed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-09-01
__________
---------------------- Page: 4 ----------------------
SIST EN 50180:2010
- 3 - EN 50180:2010
Contents
Introduction . 5
1 Scope. 5
2 Normative references . 5
3 Definitions . 5
4 Requirements . 6
4.1 Application . 6
4.2 Standard values of maximum voltage (U ) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.